Operation Manual

User’s manual NAVIGON 63xx
- 16 - Switching on the NAVIGON 63xx
- or -
1. Tap in the N
AVIGATION window of the navigation software on the
(Exit) button.
2. Tap on Standby
.
Automatic Standby
You can configure the NAVIGON 63xx so that the navigation device is
automatically switched to standby mode.
► In the NAVIGATION window tap on Options > Settings > General >
Automatic Standby
.
► Select after how much time you want the navigation device to be
switched to standby mode (Never
, After 10 mins, After 20 mins,
After 30 mins
).
► Select Power Loss in order to switch the device to standby mode
when the external power supply is interrupted. As soon as the
device is connected again to the external power supply it will switch
on again automatically.
Switching off the navigation device
► Press the (On/Off) key and keep it pressed until the device
switches off. (Approx. 4 seconds.)
- or -
1. Tap in the N
AVIGATION window of the navigation software on the
(Exit) button.
2. Tap on Off
.
Note: When you switch the navigation device to standby mode, the next
time it is switched on it will start very quickly with the window which was
active when switched off. In standby mode the device still consumes a
small amount of energy however. The battery may be flat after a few
days.
When you switch off the device, it consumes no energy. It can then take
several months for the battery to become flat. Switching the device on
again triggers a restart which can take some time (approx. 30 seconds).
Your settings and your saved destinations and routes will be retained.
3.1 Options
Some windows offer options that lead to more functions.
A description of all available options can be found in the chapter
"Options" on page 48.