Operation Manual

User’s manual NAVIGON 63xx
Voice Command - 23 -
If you would like to quit the options list without selecting a function, tap
on the button you used to open the menu.
6 Voice Command
Note: The Voice Command function is not available in every language.
For languages in which this function is available, the N
AVIGATION button
is shown in the Voice Command
window. For languages which are not
supported, the Voice Command
button is replaced by the Show Map
button.
Many functions of your navigation device can be called up conveniently
by voice commands.
6.1 Use Voice Command
When the functions in a window can be called up by voice command,
this is indicated in the top left corner of the window by the symbol
(Voice command active).
A single signal tone and the symbol
(Speak) indicate that the
navigation system is waiting for your voice command.
► Say a command.
The positive acknowledgement tone sounds (two high-pitch tones)
and the function is executed.
If the navigation system has not understood your instruction or if you do
not say anything within a certain time, the negative acknowledgement
tone (two short low-pitch tones) will sound.
► Say the command again.
If the navigation system has not understood you after several
repetitions, the prompt "Say 'Help'" will appear.
Note: Navigation instructions and warnings are muted for as long as the
navigation device expects to receive voice commands from you.
6.2 Help
Say only "Help" if you want to know which voice commands are
currently possible. In nearly all windows in which voice commands are
supported the navigation system will then tell you which commands you
can say in the current window.