Operation Manual

User’s manual NAVIGON 63xx
- 84 - Handsfree Module
► Tap on Accept if you want to take the call.
The C
ALL IN PROGRESS window opens.
► Tap on Reject if you do not want to take the call.
Note: Navigation instructions are muted during a call.
11.3 Making a call
With the NAVIGON 63xx you can make a call in various ways:
11.3.1 Making a call with the voice commands function
It is particularly convenient to make a call with the voice commands
function.
1. In the H
ANDSFREE MODULE window tap on Voice Command.
The V
OICE COMMAND window opens.
Specifying a phone number
2. Say "Telephone Number".
Say the number that you want to call.
Note: You have to say each number separately but you can say the
numbers in blocks. For example, say "nine-four-three-three" for the
number block 9433.
3. Wait for the numbers you said to appear.
Repeat steps 2 to 3 until the complete phone number is shown on
the display
. Say "Correction" if the last number you said was not
understood correctly.
4. Say "Call".
The phone number will be dialled.
Calling a contact from the phone book
2. Say "Phone Book".
3. Say the name of the contact you want to call.
If several entries are recognised as matching this name, a list with
these entries will appear.
► Say the number in front of the contact that you want to call.
If several phone numbers are saved for this contact, a list with
these numbers will appear.
► Say the number in front of the phone number that you want to call.
The connection will be established.