Operation Manual

User’s manual NAVIGON 63xx
Troubleshooting - 97 -
14 Troubleshooting
In this chapter you will find solutions to problems which may arise
during use of the NAVIGON 63xx.
This list does not claim to be complete. Answers to many other
questions can be found on the NAVIGON AG website. (Refer to
"Questions about the product" on page 8)
I ha
ve connected a charger to the NAVIGON 63xx. A connection to a
computer is shown on the display.
- or -
I have connected the NAVIGON 63xx to a computer but it is not detected
as a removable disc.
The USB connector of the charger is not fully inserted in the case.
1. Unplug the connector.
The navigation device will carry out a new start. Wait for the
navigation software to be reloaded.
2. Without delay, insert the USB connector from the charger into the
corresponding socket of the NAVIGON 63xx as far as it will go.
(Refer to "Description of the NAVIGON 63xx" on page 9)
The USB connec
tor is not connected correctly. See above.
My NAVIGON 63xx makes no response any longer, the screen is frozen.
Perform a reset. This can be done in two ways:
► Use a thin object to press the Reset key. (Refer to "Description of
the NAVIGON 63xx" on page 9)
- or -
1. Press
the
(On/Off) switch for at least 4 seconds.
The device is now deactivated.
2. Press the
(On/Off) key and keep it pressed until the device
switches on again. (Approx. 1,5 seconds)
The software will be restarted. Your settings and your saved
destinations and routes will be retained.
It seems to me that the battery of my NAVIGON 63xx becomes flat
relatively quickly when the device is not connected to an external power
supply.
Some settings can be configured so that energy consumption is
minimised.
1. In the N
AVIGATION window tap on Options > Settings > General.
2. Set the values for Brightness Day
and Brightness Night as low as
possible.