Car GPS Receiver User's Manual

User's manual NAVIGON 7100 | 7110
Routes with stages - 33 -
7.3.2 Simulating routes
It is also possible to simulate navigation.
Note: The reception of GPS-signals is not necessary for simulation.
Simulation is restricted to routes of 60 mi max.
You have calculated and displayed a route.
► Tap on Options > Simulation.
The route will be recalculated for simulation purposes. Simulation
starts when calculation has finished.
Ending simulation
You may end simulation at any time.
► Tap the (Back) button.
A dialog window will prompt you to confirm your decision to cancel
navigation.
The M
AIN WINDOW will then open.
7.3.3 Starting navigation
You have calculated and displayed a route.
Route Profile
The calculation of a route is based on so called route options.
If you want to view or change these options, tap the Route Profile
button.
Note: If you change the route options, these remain valid for
subsequent navigation.
You can get information regarding changing individual route profiles by
tapping the corresponding
(Help) button.
Turn-by-Turn List
If you would like to see detailed directions for the route, tap on Options
> Show Turn-by-Turn List
.
For detailed information about the functions in the T
URN-BY-TURN LIST
window, please refer to chapter "Turn-by-Turn List" on page 43.