Car GPS Receiver User's Manual

User's manual NAVIGON 7100 | 7110
Useful functions - 45 -
10.3 TMC (Traffic Information)
The integrated TMC receiver enables the navigation system to make
use of current traffic messaging. If necessary, it can change your route
dynamically in order to avoid a traffic jam, for example.
10.3.1 Displaying traffic messages
The traffic reports that are currently valid are available via the options of
several windows.
1. Tap on Options
> Traffic.
The T
RAFFIC INFORMATION window opens.
Above the list, the Traffic information
button shows the type of traffic
messaging listed and how many messages of this type are listed.
2. Tap the Traffic information
button to select the messages to be
displayed.
For each traffic message in the list, information about the location and
type of traffic obstruction will be displayed.
► Tap a message to display detailed information.
The navigation system can Avoid
( ) or Ignore ( ) obstructions
on the route. The Avoid / Ignore
button shows the corresponding status.
► Tap the button to select the alternative setting.
► Tap the (Back) button to close the TRAFFIC INFORMATION
window.
10.3.2 TMC Settings
► In the TRAFFIC INFORMATION window, tap on Options > TMC
Settings.
In the TMC
SETTINGS window, you can set and configure the TMC-
sender, this will determine the effect a received traffic message
concerning your route will have on consequent routing.
Tuning Mode
Tap the Tuning Mode
button to determine the settings for the station
you have chosen to receive traffic information.
► Automatically: Use the arrow buttons in the station section to tune
into another station. The system will search for another station if
reception becomes poor.
► Hold station: Use the arrow buttons in the station section to tune
into another station. The system will search for the same station on
a different frequency if the signal becomes poor.