Car GPS Device User's Manual
User’s manual NAVIGON 72xx 
- 42 -  Navigation 
6 The Traffic Information box opens if a reported traffic obstruction 
affects your route. 
If a distance is indicated in the Traffic Information box, no detour route 
was calculated yet for the traffic obstruction in question. 
►  Tap on the Traffic Information box in order to see the complete 
message. You can then decide whether a detour route is to be 
calculated (Detour
) or not (Ignore). 
If no distance is indicated, all the obstructions which are reported for 
your route and would lead to a loss of time will be avoided. 
►  Tap on the Traffic Information box in order to view all the traffic 
obstructions reported for your route. (Refer to "
TMC (Traffic 
Information)" on page 
50) 
Note: The calculation of detour routes to avoid reported traffic 
obstructions can be performed automatically. (Refer to "
TMC Settings" 
on page 
51) 
7  Ahead of many junctions the information from points 8 and 9 is hidden. 
Instead you are shown which lanes lead to your destination. 
►  Tap on the box in order to hide the lane information. 
8  The height above sea level and the current speed are shown here. 
9 In the Total box you can see the distance remaining to the destination, 
the estimated duration of the trip and the estimated time of arrival. 
►  Tap on the arrival time if you want to see the estimated driving time 
instead. 
►  Tap once again on the info box if you want to see the estimated 
time of arrival. 
10  Your current position is indicated on the map (orange arrow). The 
section of the map displayed changes continually so that your current 
position is always in view on the map. 
11  If you are navigating a multi-leg route, you will see the remaining 
distance to the next interim destination and the estimated time of arrival 
in the Next box. 
►  Tap on the arrival time if you want to see the estimated driving time 
instead. 
►  Tap once again on the info box if you want to see the estimated 
time of arrival. 
12  The name of the route section that you need to drive onto next is shown 
in the upper road box. 
13  The name of the section you are currently driving on is shown in the 
lower road box. 
Note: The displays of many of the above mentioned areas can be 
configured in Options
 > Settings > Navigation. Some displays will only 
function if the required information is available on the map.. 










