Car GPS Device User's Manual

User’s manual NAVIGON 72xx
Handsfree Module - 53 -
Before a trip
If your trips are recorded in the logbook, a window for entering the trip's
key data is opened before navigation starts. You can also decide,
however, not to record the trip in question.
► If you don't want to record the trip in question, tap on
(Cancel
).
- OR –
1. Enter a name for this entry, e.g. "Trip to customerX", in the Logbook
Entry box.
2. Enter the mileage.
3. Tap on Reason for the Trip
and select a reason for the trip from the
list of possibilities.
7 Handsfree Module
The hands-free function allows you to use the NAVIGON 72xx as a
hands-free module for your mobile phone.
Opening the hands-free module
► Tap in the navigation application on (Phone).
The H
ANDSFREE MODULE window opens.
Operating the hands-free module
All functions can be reached from the HANDSFREE MODULE window.
► Tap on (Navigation) in order to move the navigation
application into the foreground.
► Tap on (Back) in order to close the hands-free module and
return again to the previously opened window.
7.1 Connecting to a telephone
The NAVIGON 72xx must be connected to a mobile phone in order for
you to use the telephone functions.
If the NAVIGON 72xx was last connected to the same mobile phone,
the connection will be established without further prompting.
Note: You can configure the automatic connection. (Refer to "
Bluetooth
Function" on page
57)
Problems occurring when trying to establish a Bluetooth connection can
have various causes: