Car GPS Device User's Manual

User’s manual NAVIGON 72xx
Troubleshooting - 63 -
9.2 Identification and serial number
The navigation system comes with various identification labels.
(Examples: CE mark, serial number, ...) These identification labels can
be found on the back of the device under a cover in the middle of the
recess for the cradle. On this cover is the NAVIGON logo.
If you need to see any of these labels, proceed as follows:
1. Insert a finger-nail in the recess on the top of the cover.
2. Pull the cover off the device.
To replace the cover:
1. Place the cover correctly in position.
2. Push the cover firmly against the device until it latches home in all
corners.
9.3 Declaration of conformity
The NAVIGON 72xx described in this manual bears the CE label
among others.
Products with the CE marking comply with Radio & Telecommunication
Terminal Equipment Directive (R&TTE) (1999/5/ECC), the
Electromagnetic Compatibility Directive (89/336/ECC) and the Low
Voltage Directive (73/23/ECC) – as amended by Directive 93/68/ECC –
issued by the European Community Commission.
Compliance with these directives implies conformity with the following
European Standards:
EN 300328 V 1.71, EN 301489-1 V 1.6.1, EN 301489-3 V 1.4.1,
EN 301489-17 V 1.2.1, EN 55022, EN 55024, EN 60950-1: 2001,
EN 50371: 2002, EN 50332: 2003, EN 61000-3-2, EN 61000-3-3,
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5,
EN 61000-4-6, EN 61000-4-8, EN 61000-4-11
The manufacturer is not liable for modifications made by the user which
may alter the device's conformity with the CE label, nor for the
consequences thereof.
10 Troubleshooting
In this chapter you will find solutions to problems which may arise
during use of the NAVIGON 72xx.
This list does not claim to be complete. Answers to many other
questions can be found on the NAVIGON AG website. (Refer to
"
Questions about the product" on page 7.)