User’s manual NAVIGON 81xx English (United Kingdom) April 2008
The crossed-out wheeled bin means that within the European Union the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked with this symbol. Do not dispose of these products as unsorted municipal waste. Imprint NAVIGON AG Schottmüllerstraße 20A D-20251 Hamburg The information contained herein may be changed at any time without prior notification.
User’s manual NAVIGON 81xx Table of contents 1 Introduction .......................................................................................6 1.1 About this manual.....................................................................................6 1.1.1 1.1.2 1.2 Legal notice ..............................................................................................6 1.2.1 1.2.2 1.3 2 Questions about the product ....................................................................7 2.
User’s manual NAVIGON 81xx 6 Navigation .......................................................................................22 6.1 Starting the navigation application .........................................................23 6.2 Specifying a destination .........................................................................24 6.2.1 6.2.2 6.2.3 6.2.4 6.2.5 6.2.6 6.2.7 6.2.8 6.2.9 6.2.10 6.2.11 6.3 Managing destinations ...........................................................................
User’s manual NAVIGON 81xx 7.3.2 7.3.3 7.3.4 7.3.5 7.4 During a call ...........................................................................................54 7.4.1 7.4.2 7.4.3 7.4.4 7.5 9 10 Preset ........................................................................................55 Handsfree Settings ....................................................................56 Bluetooth Function.....................................................................56 Connection with Mobile Phone...
User’s manual NAVIGON 81xx 1 Introduction 1.1 About this manual 1.1.1 Conventions For better legibility and clarification, the following styles are used in this manual: Bold and italics: Registered names, company and product descriptions. SMALL CAPITALS: Window and dialogue box titles. Bold: Highlighting of important parts in the text. Underlined: Names of buttons, input boxes and other elements on the user interface.
User’s manual NAVIGON 81xx 1.2.2 Trademarks All brand and trade marks mentioned in this document and registered by third parties are subject without reservation to copyright law and the proprietary rights of their respective owners. All trade marks, trade names and company names used in this document are or may be trade marks or registered trademarks of their respective owners. All rights reserved except those explicitly granted.
User’s manual NAVIGON 81xx 2.2 Description of the NAVIGON 81xx 1 2 Touch-screen 3 Volume on/off 4 Connection for external GPS antenna 5 Mini-USB socket for USB cable / Mains adapter / Car charger cable 6 LED 7 Reset Headset socket 8 - Quieter 10 Microphone 11 + Louder 12 Stylus 13 Slot for SD/SDHC memory card 14 On/Off 9 2.
User’s manual NAVIGON 81xx 2.3.1 Navigation safety information Use the navigation system at your own risk. Caution! To prevent accidents, do not operate the navigation system while driving. Caution! Do not look at the display unless it is absolutely safe to do so! Caution! Traffic regulations have priority over any instructions from the navigation system.
User’s manual NAVIGON 81xx Note: Clean the navigation device only with a damp cloth. Note: Do not unplug by pulling on the cable. Doing so could damage the cable! Note: If you want to transport the navigation device, use the cloth pouch provided in order to protect the touch-screen from scratches. Note: Create a backup of the data contained on the memory card provided.
User’s manual NAVIGON 81xx Caution! After installation, check all safety-relevant equipment in the car. Caution! Connect the car charger cable only to 10-30V cigarette lighters. Caution! Disconnect the car charger cable from the cigarette lighter whenever you park the car. The integrated mains adapter always consumes a small amount of energy and could drain the car battery. 2.4 Preparing the NAVIGON 81xx for use 2.4.1 Assembling the mains adapter The mains adapter has an operating voltage of 100~240V.
User’s manual NAVIGON 81xx 2.4.3 Memory card A memory card with the software and card data is already inserted in the navigation device. You can copy these data to another memory card or save them on your PC. To do so, use the NAVIGON Fresh software which is included on the CD provided or can be downloaded free of charge from www.navigon.com. The following memory media can be used in the NAVIGON 81xx: ► SD cards with maximum 2 GB ► SDHC cards Removing the memory card 1.
User’s manual NAVIGON 81xx 2.4.4 Preparing the navigation system for use Caution! Be sure to refer to all the safety information in chapter "Important safety information" on page 8. Securing the cradle 1. Clean that part of the windscreen to which you want to secure the cradle. The windscreen must be dry and free of dirt and grease. 2. Use the suction cup to fix the cradle to the windscreen. 3. Press the lever on the suction cup forwards.
User’s manual NAVIGON 81xx On the rear of the navigation device is a ring which fits in the ring of the cradle. 1. Align the head of cradle so that the button is on top. 2. Tilt the top end of the navigation device slightly towards yourself. 3. Position the recess in the ring of the navigation device so that it fits in the ring of the cradle. (See illustration) 4. Press the device against the cradle until you hear it lock in place. Removing the navigation device from the cradle 1.
User’s manual NAVIGON 81xx 3 Switching on the NAVIGON 81xx 1. Press the (On/Off) key. If password protection has been activated, the ENTER PASSWORD window opens. 2. Enter the password. 3. Tap on OK. The START window opens.
User’s manual NAVIGON 81xx Product Information: Here you are shown the version numbers and copyright details of the hardware and software. Touchscreen Calibration: The touchscreen can be re-calibrated if it responds poorly to touch. Follow the instructions on the screen. Settings: Here you can make the settings which are to apply in all applications of the NAVIGON 81xx, e.g. language, brightness and time format. For details refer to chapter "Configuring the NAVIGON 81xx" on page 64.
User’s manual NAVIGON 81xx Note: The new password must have exactly 4 digits. 4.3 Cancelling password protection 1. In the START window, tap on Options > Password Lock. The ENTER PASSWORD window opens. 2. Enter the currently valid password in the Enter password box. 3. Tap on Deactivate. 4.4 Forgotten your password? If you have forgotten your password, proceed as follows: 1. Tap on Info. 2. Follow the instructions on the screen. 5 Operating the NAVIGON 81xx 5.
User’s manual NAVIGON 81xx During play-back of an audio file You can use the keys to adjust the volume of the MP3 player. Other cases In all other cases the keys have no effect. 5.2 Information Various information icons are located at the top of many windows. GPS The GPS icon is visible only in the navigation application. It can indicate the following GPS reception states: No GPS (No symbol): The built-in GPS receiver is not operational. Contact customer service if the problem persists.
User’s manual NAVIGON 81xx Tuning: The TMC receiver is operational but cannot find a station that is transmitting TMC signals. Traffic messages are active however. This can be the case, for example, when travelling through a tunnel. TMC on Standby: Traffic messages can be received. Note: The TMC antenna is integrated in the car charger cable.
User’s manual NAVIGON 81xx Connected (white mobile phone): The NAVIGON 81xx is connected to a mobile phone and can be used as a hands-free car kit. Call in Progress (green mobile phone): The hands-free module of the NAVIGON 81xx is being used at the moment for a call. FM Transmitter The NAVIGON 81xx has an integrated FM transmitter. This means that you can listen to all audio outputs via the car radio's loudspeakers.
User’s manual NAVIGON 81xx then simply enter "WURZBURG". Special characters may be helpful however when naming saved destinations and routes. 5.3.1 Special keys inserts a space. deletes the character in front of the cursor. opens the keyboard with numerals. Latin, Cyrillic and Greek alphabet opens the keyboard with the Latin alphabet. opens the keyboard with the Cyrillic alphabet. opens the keyboard with the Greek alphabet.
User’s manual NAVIGON 81xx Note: The Cyrillic alphabet has more letters than places available on the Cyrillic keyboard. The missing letters are included on the keyboard with Cyrillic special characters. 5.3.2 Entering data Often, lists appear from which you can select an entry. This is the case, for example, when you enter the name of a town. As soon as you enter the first letter, the largest city in the given country that begins with this letter appears.
User’s manual NAVIGON 81xx Impaired GPS reception If GPS reception is impaired, navigation will be interrupted. The navigation application remains in the foreground. As soon as GPS reception is restored, the navigation system calculates any change of position which has occurred in the meantime. You can then simply continue navigation. Arriving at your destination When you have reached your selected destination, a message to this effect will be displayed.
User’s manual NAVIGON 81xx Note: If the GPS icon indicates GPS Ready after far less than 20 minutes, it is advisable to leave the navigation device switched on for at least another 15 minutes in order to ensure reliable operation of the receiver. Each time you switch on the navigation device after this, GPS reception will start within a short time. If the navigation device has not been switched on for more than a week, it can take up to 10 minutes to re-initialise the receiver.
User’s manual NAVIGON 81xx ► 6.2.1 CONTACTS: all destinations which you have imported from Microsoft Outlook. Specifying the country in which the destination is situated Above the entry boxes in the ADDRESS, POI IN A TOWN and POI NATIONWIDE windows is the Country button. It shows the country code of the country from which you can currently enter navigation destinations. If your destination is in a different country, then proceed as follows: 1. Tap on the Country button. The COVERED COUNTRIES list opens.
User’s manual NAVIGON 81xx Note: It is not necessary to enter all the address details. If you specify the town only, the navigation system will calculate a route to the town centre. If you specify only the town and street without specifying a house number or cross street, the navigation system will calculate the best route to this street. 5. Tap on Start Navigation. Sometimes the destination cannot be found exactly because, for example, the entered combination of place and street name exists several times.
User’s manual NAVIGON 81xx Note: The Voice Command function is not available for every language. In the languages for which this function is not available, the Voice Command button is replaced by the Show Map button. 6.2.4 Points of interest Points of interest, also called POI (Points Of Interest) for short, are useful addresses that are catalogued according to particular criteria.
User’s manual NAVIGON 81xx In this case a window opens with all the destinations matching your entry plus additional information. ► Tap on the destination to which you would like to navigate. The map opens in Preview mode. The destination is indicated on the map. For details of how to start navigation refer to chapter "Starting navigation" on page 32. POI of nationwide significance POI of nationwide significance are airports, sights, national monuments, large ports etc.
User’s manual NAVIGON 81xx The Name of the Destination list opens. It contains POI from the specified category, sorted alphabetically. 5. Tap on the name of the destination. 6. Tap on Start Navigation. Sometimes the destination cannot be found exactly because, for example, several restaurants with the same name exist. In this case a window opens with all the destinations matching your entry plus additional information. ► Tap on the destination to which you would like to navigate.
User’s manual NAVIGON 81xx 6.2.5 Information about the destination For many destinations that you specify, there will be further information available, stored in the navigation system's database. There is, for example, a telephone number available for many restaurants. You can then call the restaurant to reserve a table, for example. One of the destination entry windows described above is open. ► Tap on (Destination Info). The DESTINATION INFO window opens.
User’s manual NAVIGON 81xx Information on how to save a destination can be found in chapter "Saving destinations" on page 33. 1. In the NAVIGATION window, tap on My Destinations > Favourites. 2. Tap on the destination to which you would like to navigate. 3. Tap on Start Navigation. The map opens in Preview mode. The destination is indicated on the map. For details of how to start navigation refer to chapter "Starting navigation" on page 32. 6.2.
User’s manual NAVIGON 81xx 6.2.10 Selecting destinations on the map You may select a destination directly on the map. This is a quick way to select towns, streets and POI. 1. In the NAVIGATION window, tap on Options > Show Map. (Destination search) 2. Tap on The map opens in Destination search mode. 3. Tap on the point to which you want to navigate.
User’s manual NAVIGON 81xx Turn-by-Turn List ► If you want to see detailed directions for the route, tap on Options > Turn-by-Turn List. For details of the functions in the TURN-BY-TURN LIST window refer to chapter "Turn-by-Turn List" on page 48. Start Navigation ► Tap on Start Navigation or simply start driving. No GPS reception If GPS signal reception is not good enough, the following message will appear: "GPS reception is currently not sufficient.
User’s manual NAVIGON 81xx 1. Select a destination from the LAST DESTINATIONS list or from the CONTACTS list. (Refer to "Last Destinations" on page 30 or to "Contacts" on page 31). Do not tap the Start Navigation button! 2. Tap on Options > Save as Favourite. 3. Enter a name for the destination. 4. If you want to define the destination as your home address, tap on (Toggle) so that the value Yes is highlighted in white. 5. Tap on Save. 6.3.
User’s manual NAVIGON 81xx As soon as you start navigation, your current location will be used as the starting point for the route calculation. The first leg of the route is therefore the journey to the route point with flow number "1". 1. Tap on the Specify Starting Point box. The STARTING POINT menu opens. If you want to enter your current location as the starting point: 2. Tap on the Current Position menu item. If you want to enter a different starting point: 2. Tap on the corresponding button. 3.
User’s manual NAVIGON 81xx Note: The start point (flow number "0") can be neither moved nor deleted. ► Tap on the route point that you want to edit. The context menu contains the following buttons: Route Point Up: Moves the selected route point further to the front. (Example: route point 2 becomes route point 1). Route Point Down: Moves the selected route point further to the back. (Example: route point 2 becomes route point 3). Delete: Deletes the selected route point.
User’s manual NAVIGON 81xx 6.4.5 Calculating and displaying routes It is possible to calculate and display a planned route on the map even without GPS reception in order to get an impression of the journey. The ROUTE PLANNING window is open. The starting point and at least one route point have been entered. 1. Tap on Show Route. The map opens in Preview mode. The starting point and the route points are marked by flags. The distance and the estimated trip time is given for each leg of the route.
User’s manual NAVIGON 81xx Turn-by-Turn List If you want to see detailed directions for the route, tap on Options > Turn-by-Turn List. For details of the functions in the TURN-BY-TURN LIST window refer to chapter "Turn-by-Turn List" on page 48. Start Navigation ► Tap on Start Navigation or simply start driving. No GPS reception If GPS signal reception is not good enough, the following message will appear: "GPS reception is currently not sufficient.
User’s manual NAVIGON 81xx GPS Status: Opens the GPS STATUS window. Here you can see details regarding GPS reception. You can also save the data of your current location. For details refer to chapter "GPS Status, saving the current location" on page 47. Home Address: Saves the selected destination as your home address. You can then always start navigation to this destination very quickly by tapping in the NAVIGATION window on Take Me Home.
User’s manual NAVIGON 81xx Simulation: Simulates a navigation on the route indicated. This simulation can be performed without GPS reception. On multi-leg routes, only the first leg is simulated. Traffic: Opens the TRAFFIC INFORMATION window in which pending reports are listed. For more details refer to chapter "TMC (Traffic Information)" on page 49. Turn-by-Turn List: Shows detailed directions for the route, including all points at which you must turn.
User’s manual NAVIGON 81xx The map opens in Preview mode. The entire route is visible. 1 The route is highlighted in orange. 2 Your current position is indicated (orange arrow). If you display a planned or loaded route and the specified starting point is not your current location, then it is possible that your current position will not be shown on the preview. 3 The destination is marked with a little flag.
User’s manual NAVIGON 81xx 6.6.3 Map in Navigation mode After the route was shown in Preview mode, navigation was started. The map opens in Navigation mode. 1 Here you can see the signposting which you must follow. 2 Here you can see any speed limits which are in force. 3 The route is highlighted in orange. 4 When two manoeuvres need to be executed in quick succession, the small arrow box indicates the second manoeuvre to be executed.
User’s manual NAVIGON 81xx 9 Your current position is indicated on the map (orange arrow). The section of the map displayed changes continually so that your current position is always in view on the map. 10 If you are navigating a multi-leg route, you will see the remaining distance to the next interim destination, the estimated duration of the trip and the estimated time of arrival in the Next box. 11 The name of the next stretch of road that you must travel on is displayed in the upper street box.
User’s manual NAVIGON 81xx Functions of the map in Navigation mode When the map is open in Navigation mode and you tap on any point on the map, buttons with various functions will appear. 2D/3D: Changes between 2D and 3D mode. The icon indicates the current mode. Day/Night: Changes between "Day" and "Night" display modes. The icon indicates the currently selected mode. Interim Destination: Opens the menu for entering an interim destination.
User’s manual NAVIGON 81xx The Reality View mode shows with greater clarity the signposting and lanes you must follow. This display does not change until you have passed the spot indicated. The map will then change back to Navigation mode. ► If you want to change to Navigation mode before you have passed the junction, just tap on any point on the map. Note: Reality View is not available for all motorway junctions and three-leg motorway junctions. Availability is dependent on the map data in use. 6.6.
User’s manual NAVIGON 81xx Zoom Out: The map section shown becomes larger, but you will see fewer details. Zoom In: The map section becomes smaller, but you will see more details. Zoom Mode: When this button is active you can mark out a section of the map with the stylus or your finger. Mark out the section from upper left to bottom right to zoom in until the section fills the screen. Mark out the map section from bottom right to top left to zoom out.
User’s manual NAVIGON 81xx Save: Opens the SAVE DESTINATION AS... window. You can enter a name under which the selected point will be saved in the FAVOURITES list. For more details refer to chapter "Saving destinations" on page 33. Search Nearby: Opens the POI NEARBY window. Here you can search for destinations near the selected point. (Refer to "POI nearby” page 27) ► ► Tap on (Destination search) in order to quit Destination search mode.
User’s manual NAVIGON 81xx The SAVE DESTINATION AS... dialog box opens. 2. Enter a name for the destination. 3. Select whether you want to save your current position as the home address. 4. Tap on Save. 6.7.3 Turn-by-Turn List You can display detailed directions of the calculated route before starting navigation or at any time during navigation. This list displays all of the driving instructions in table form. The map is open in Preview mode, Navigation mode or Reality View mode.
User’s manual NAVIGON 81xx Blocking route sections 1. Tap on the route sections that you do not want to travel on so that the 2. Tap on (Forbid) symbol appears next to them. (Modify Route). The navigation system calculates an alternative route avoiding the route sections selected. The new driving instructions are displayed in the TURN-BY-TURN LIST window. (Back) in order to close the TURN-BY-TURN LIST 3. Tap on window again.
User’s manual NAVIGON 81xx TMC Settings ► In the TRAFFIC INFORMATION window, tap on Options > Traffic. In the TRAFFIC INFORMATION window you can set the TMC traffic station and configure whether the reception of a traffic message concerning your route should affect your route planning and if so how. Tuning Mode Tap on Tuning Mode and select a method for selecting the TMC radio station. ► ► ► Automatic: You can use the arrow buttons in the station area to select another station.
User’s manual NAVIGON 81xx Recording trips You can have all trips recorded automatically. 1. Tap in the NAVIGATION window on Options > Settings > Basic Settings. 2. Set Logbook to Yes. 3. Tap on OK. Every trip from now on will be recorded until you reset Logbook to No. It is possible, however, to exclude individual trips from the recording. Before a trip If your trips are recorded in the logbook, a window for entering the trip's key data is opened before navigation starts.
User’s manual NAVIGON 81xx ► ► 7.1 Tap on (Navigation) in order to move the navigation application into the foreground. Tap on (Back) in order to close the hands-free module and return again to the previously opened window. Connecting to a telephone The NAVIGON 81xx must be connected to a mobile phone in order for you to use the telephone functions. If the NAVIGON 81xx was last connected to the same mobile phone, the connection will be established without further prompting.
User’s manual NAVIGON 81xx 7.3 Making a call With the NAVIGON 81xx you can make a call in various ways: Note: Play-back of the MP3 player and the navigation instructions are muted during a call. 7.3.1 Dialling a telephone number 1. Tap on the HANDSFREE MODULE button in the Keyboard window. 2. Enter the desired telephone number. 3. Tap on the Dial a Number button. 7.3.2 Dialling a Speed Call number to call home You can configure 4 Speed Call buttons.
User’s manual NAVIGON 81xx 1. Tap in the HANDSFREE MODULE window on the Recent Calls button. 2. Tap on the entry you want. Note: The RECENT CALLS list is not copied permanently to the navigation device. It is available to the hands-free module only for as long as it is connected to the mobile phone. 7.3.5 Transferring a call from your mobile telephone The NAVIGON 81xx takes calls automatically from the mobile phone as soon as a Bluetooth connection is established between the two devices. 7.
User’s manual NAVIGON 81xx 7.4.4 Ending the call ► 7.5 Tap in the CALL IN PROGRESS window on the Hang up button in order to end the call. Configuring the hands-free function The hands-free module of the NAVIGON 81xx contains a number of settings that can be individually configured. For information about configuring the settings in this window refer to "Configuring the NAVIGON 81xx" on page 64. 7.5.
User’s manual NAVIGON 81xx 7.5.2 Handsfree Settings In the HANDSFREE SETTINGS window you can configure the settings for the phone functions of the hands-free module of your NAVIGON 81xx. ► In the HANDSFREE MODULE window, tap on Settings > Handsfree Settings. The HANDSFREE SETTINGS window opens. Volume of the Phone Call: The volume of the call can be adjusted independently of the volume of the navigation application and the MP3 player.
User’s manual NAVIGON 81xx 7.6 Connection with Mobile Phone Note: The Bluetooth functions of both the NAVIGON 81xx and the mobile phone must be configured accordingly in order for a Bluetooth connection to be established between the two devices. For details of how to configure the NAVIGON 81xx refer to chapter "Bluetooth Function" on page 56. For details of how to configure the mobile phone refer to the related manual. The NAVIGON 81xx can establish a connection to only one Bluetoothcapable mobile phone.
User’s manual NAVIGON 81xx 2. Using your mobile phone, search for other Bluetooth devices. The navigation device is detected as NAVIGON. 3. Initiate a connection to the detected NAVIGON device. The mobile phone prompts you to enter a password. 4. Enter a four-digit password (user-defined). The NAVIGON 81xx prompts you to enter a password. 5. Enter the same password in the Key box as on the mobile phone and tap on OK. The HANDSFREE MODULE window opens. A connection is established between the two devices.
User’s manual NAVIGON 81xx 8.1 Suitable files The MP3 player can play back MP3 files and WMA files. Files which are playback-protected in any way (DRM, Digital Rights Management) cannot be played back. 8.2 Opening the MP3 player When the START window is open: ► Tap on Music. When the hands-free module or the navigation application is open: ► Tap on the (Music) button, which is located at the bottom edge of many windows. The MP3 player cannot be opened in the picture viewer or the FM transmitter. 8.
User’s manual NAVIGON 81xx 8.4 Operating the MP3 player Information area Three music items are always displayed in the information area of the MUSIC window: ► Title last played: position of the file in the folder, name of the title, performer If no title was played yet, the last title in the current folder will be shown here.
User’s manual NAVIGON 81xx Note: When all the titles have been played, play-back will continue from the beginning. To interrupt the play-back of audio files you must tap on (Stop) or ► ► 8.5 (Pause). Tap on (Shuffle Mode) in order to play back the titles in random order. Tap on this button again in order to play back the titles again in ascending order.
User’s manual NAVIGON 81xx 9.1 Suitable files The picture viewer can show JPG files, PNG files and GIF files (no animated GIF files). 9.2 Opening the picture viewer You can open the picture viewer only from the START window. ► 9.3 Tap on Pictures. Selecting an image file ► In the PICTURES window, tap on Folder. The CURRENT FOLDER opens. The name of the current folder is indicated at the top. Files and sub-folders are listed underneath.
User’s manual NAVIGON 81xx Slide Show: Shows all the pictures in the current folder one after the other. Exit: Closes the picture viewer. 9.5 Play-back mode From the PICTURES window you can start two play-back modes. Full Screen ► Tap on (Full Screen). The picture is scaled to its maximum size. You can use the button (Next) and the button (Previous) to switch to the other pictures in the current folder. ► Tap on the picture in order to close complete picture mode.
User’s manual NAVIGON 81xx Switching on the FM transmitter 1. In the START window, tap on Options > FM Transmitter. 2. Tap on On. 3. Follow the instructions on the screen. Note: The frequency selected in the FM TRANSMITTER window must be set on the car radio. The navigation device must not be too far from the vehicle antenna because the FM transmitter has a transmission range of only a few metres. Switching off the FM transmitter 1. In the START window, tap on Options > FM Transmitter. 2. Tap on Off. 10.
User’s manual NAVIGON 81xx Some settings can have only one of two values. These settings can be recognised by the (Toggle button). All possible values are visible. The currently valid value is highlighted in white. ► Tap on values. (Toggle) in order to switch between the possible Some settings can accept several different values. These settings can be recognised by the visible. 1. Tap on (List) button. The currently valid value is (List). A list with all possible values opens.
User’s manual NAVIGON 81xx 12 Appendix 12.1 Technical data Dimensions Weight Operating conditions 134.5 x 84.4 x 21.9 mm approx.
User’s manual NAVIGON 81xx 12.2 Identification and serial number The navigation device has various identification labels underneath the rear cover (e.g. CE label, serial number, ...) If you need to see any of these labels, proceed as follows: 1. Switch off the navigation device. 2. Take the stylus and the memory card out of the device. 3. With your thumbnail in the slot on the bottom of the device, pull the rear cover off the device. To close the rear cover again: 1. Place the cover correctly in position.
User’s manual NAVIGON 81xx 13 Troubleshooting In this chapter you will find solutions to problems which may arise during use of the NAVIGON 81xx. This list does not claim to be complete. Answers to many other questions can be found on the NAVIGON AG website. (See "Questions about the product" on page 7) I have connected a charger to the NAVIGON 81xx. A connection to a computer is shown on the display. or I have connected the NAVIGON 81xx to a computer but it is not detected as a removable disc.
User’s manual NAVIGON 81xx The software does not respond any longer. The screen is frozen. or The software responds strangely to my entries. Carry out a device reset. All the internal components of the navigation device will be reset as the result. 1. With the (On/Off) key pressed and held, press the key simultaneously. (This key is countersunk. Use the stylus or a paperclip.) The device will switch off. Wait a few seconds. 2. Press the again.
User’s manual NAVIGON 81xx 14 Index in a Town.................................. 28 Nationwide ............................... 28 Nearby...................................... 27 Save ............................................. 33 Start Navigation ............................ 32 Take Me Home ....................... 31, 34 Turn-by-Turn List .......................... 33 B Block............................................ 44, 48 Bluetooth ........... see Handsfree Module Bluetooth Function ................
User’s manual NAVIGON 81xx Incoming Call ................................ 52 Open ............................................. 51 Phone Book .................................. 53 Preset ..................................... 53, 55 Recent Calls ................................. 53 Settings ......................................... 54 Show Map ..................................... 54 Symbols ........................................ 19 Use handsfree .............................. 54 Use Mobile Phone ........
User’s manual NAVIGON 81xx R Reality View....................................... 44 Recalculate Route ............................. 50 Recent Calls ...................................... 53 Route Planning.................................. 34 Route points Add ............................................... 35 Delete ........................................... 36 Order............................................. 36 Starting Point ................................ 35 Route Profile.............................
