User's Manual

Table Of Contents
User’s manual NAVIGON 81xx
- 10 - Before you begin
Caution! Use only the charger provided or one that has been approved
by the manufacturer.
Connect the charger to a suitable power supply. The voltage
requirements can be found on the device case and/or the packaging.
Note: Do not kink the cable. Make sure that the cable cannot be
damaged by sharp-edged objects.
Note: Clean the navigation device only with a damp cloth.
Note: Do not unplug by pulling on the cable. Doing so could damage
the cable!
Note: If you want to transport the navigation device, use the cloth
pouch provided in order to protect the touch-screen from scratches.
Note: Create a backup of the data contained on the memory card
provided. This is very easy to do with the NAVIGON Fresh software
which is included on the CD provided or can be downloaded free of
charge from our webseite www.navigon.com
.
Note: The memory card must remain inserted in the device during
operation of the navigation system.
Note: Use only SD or MMC memory cards! Make sure that the memory
card contacts are clean and undamaged.
2.3.3 Safety guidelines when installing the device in your car
Caution! Fasten the cradle so that the navigation device is easy to see
and operate by the driver. Make sure that the driver's view of the traffic
is not impeded.
Caution! Do not attach the cradle within the working zone of any
airbags.
Caution! Do not fasten the cradle too close to the steering wheel or
other controls. The driver must not be obstructed in operating any car
functions.