User's Manual
Table Of Contents
- Table of contents
- 1 Introduction
- 2 Before you begin
- 3 Switching on the NAVIGON 81xx
- 4 Password Lock
- 5 Operating the NAVIGON 81xx
- 6 Navigation
- 6.1 Starting the navigation application
- 6.2 Specifying a destination
- 6.2.1 Specifying the country in which the destination is situated
- 6.2.2 Entering an address
- 6.2.3 Selecting the destination address by voice command
- 6.2.4 Points of interest
- 6.2.5 Information about the destination
- 6.2.6 Last Destinations
- 6.2.7 Favourites
- 6.2.8 Contacts
- 6.2.9 Navigating home
- 6.2.10 Selecting destinations on the map
- 6.2.11 Starting navigation
- 6.3 Managing destinations
- 6.4 Multi-leg routes
- 6.5 Options in the navigation application
- 6.6 Working with the map
- 6.7 Useful functions
- 7 Handsfree Module
- 8 Music
- 9 Pictures
- 10 FM Transmitter
- 11 Configuring the NAVIGON 81xx
- 12 Appendix
- 13 Troubleshooting
- 14 Index
User’s manual NAVIGON 81xx
Before you begin - 13 -
1. Insert the memory card into the device (see illustration).
2. Press the card into the device until it locks in place.
Note: The navigation device will work only if the memory card contains
the navigation software and map data.
2.4.4 Preparing the navigation system for use
Caution! Be sure to refer to all the safety information in chapter
"Important safety information" on page 9.
Securing the cradle
1. Clean that part of the windscreen to which you want to secure the
cradle. The windscreen must be dry and free of dirt and grease.
2. Use the suction cup to fix the cradle to the windscreen.
3. Press the lever on the suction cup forwards.
Supplying power to the navigation device
Included in delivery of the NAVIGON 81xx is a car charger cable with
which power can be supplied to the navigation device via the vehicle's
cigarette lighter.
Connect the car charger cable to the vehicle's cigarette lighter and to
the mini-USB socket on the cradle. The navigation device will be
supplied with power as soon as it is inserted in the cradle.
Note: Power supply will only be possible via the cradle when the
navigation device is inserted. The device's USB socket will then be out
of function.
Caution! Connect the car charger cable only to 12V cigarette lighters.