User Operation Manual
Contents Disclaimer.....................................................................................................................................................................................4 i) Basic Operation Setting ....................................................................................................................................................6 ii) Settings .......................................................................................................................
2.9 Version Information .................................................................................................................................... 23 iii) Application ........................................................................................................................................................................ 24 1. Navigation ......................................................................................................................... 24 2. Radio................
Disclaimer For your safety, it is advisable to not watch video or operate the machine when you are driving. While driving, please adjust the volume to the optimum level. Before operating the machine, you are advisable to read carefully and understand the safety instructions and warning signals stated in the manual. Keep the manual in the reach for future reference. 1. Firstly, please ensure safety on the road. 2.
dangerous to install and repair the machine by personnel without proper professional installation training and experience on electronic device and automobile parts. 7. Please do not install or store the machine, especially LED display screen directly under the sunlight or hazardous substances. During installation, please ensure no direct contact with the air-conditioner's ventilation duct. This will cause damage to the machine, the car or injury to the human body. 8.
i) Basic Operation Setting 1. Power On / Off the machine When ACC is connected，press the power button on the front panel to switch on the machine Press the power button on the front panel to switch on machine. Turnoff the engine and unplug the car key to switch off. 2. Volume Adjustment Press " ”on the front panel (some models with volume control VOL+/VOL- button on the front panel) to adjust the volume of the machine. 3.
5. Camera The screen will be automatically switched to rear view sight when the car is at reverse position. 6. Playback Source Selection At front panel, press Application to view Radio, Music, Video, USB play, TV (optional) or AVIN mode and options. At homepage, touch APP icon to enter application interface. Please view the detailed operation manual of respective functions at the subsequent chapters. Slide left or right to switch between different home pages.
7. Playback Mode and Position Memory When you reboot the machine, the system will resume to the earlier mode prior to shutdown. For radio, it will resume to the radio channel prior to shutdown. For music or video, it will resume playing the last song or video prior to shutdown.
ii) Settings Touch the icon “ ” on the front panel to enter Settings interface. Select the corresponding option to enter the corresponding settings option. Move the options bar up and down to find the desired settings.
Note： Direction of ON and OFF mode under setting interface . [ [ ] ON mode ] OFF mode 1. Network & Internet 1.1 Wi-Fi Connection Go to settings then Wi-Fi to ensure Wi-Fi is switched on to connect to the internet.
As per the above picture，search for your desired Wi-Fi hotspot. Complete the Wi-Fi connection by inserting the password and touch Connect. You may change the language type, language input and type of keyboard in this interface. 1.2 More Setting of personal hotspot and VPN is allowed.
2. Car lnfotainment 2.
Touch Assist User can choose to on or off the touch assist. The touch assist has 7 most commonly used options and is displayed on top of the screen at the interface where it provides the user easy maneuver of the machine. Reverse Volume Control To adjust the volume while at the reverse position, select Reverse Volume Suppression. There are four options available namely None, Weak, Medium and Strong.
Selecting None means there will not be any changes to the current defaulted volume. Selecting Strong means lowering down the reverse volume at most.
Boot Logo Touch the boot logo, key in the password （5678）at the popup dialog to enter boot menu. Restore Factory Setting Touch Restore Factory Setting，at the popup dialog, select confirm. When the machine restarts, the system will restore to factory settings. All your settings will be removed.
2.
2.3 Volume Option Volume options for respective systems can be adjusted in accordance to desire.
2.4 Sound Effect Enter sound effect interface by touching "Sound Effect" to access different sound effect modes. Balance Setting Touch four arrows to adjust the 4 speakers volume to control the sound effect. The 4 speakers volume is consistent when the black dot is right at the center. Touch the restore icon “ restore the defaulted balance setting.
Loudness Setting Sliding to the left or right to adjust the loudness. The higher the loudness, the higher the low frequency value of the sound. Please adjust the loudness reasonably to avoid loss of signal. 2.
Video in Motion Slide button to the right to enable or disable the video in motion option. If video in motion is disabled, user cannot watch video and view picture while the car is in motion. Note：Recommend to enable this option for your safety. Reversal Warning Line The camera of some car models may not have reversal-warning line. By enabling this option, user is able to see the distance to warning line at the display during reverse. 2.
Navigation Application Option User may insert pre-installed navigation application to pair with the navigation button. The system will automatically display all installed applications and you may touch to select the application of your choice. Navi Mixed Slide to the left or right to adjust the Navi Mixed volume. 2.
Name of Device Display the Bluetooth name of the machine Auto Connect By enabling this option, the machine will auto search and auto connect to the last connected device. Auto Answer By enabling this option, the machine will auto answer all incoming calls using bluetooth. 2.
Please follow the steps below to set the features of the control buttons on your steering wheel. To delete all, select“ ”. Press the desired control button on your steering. Touch the corresponding feature of the control button on the touchscreen. When the control button changes to blue colour that means the setting is successful. Repeat step 2 - 4 to complete all the control button setting. 2.
iii) Application 1. Navigation GPS Satellite Navigation Operation The invention of GPS navigation has brought to the convenience of travelling today. By using the GPS positioning and electronic navigation map, user can reach the destination faster and more efficiently. To navigate accurately, both the GPS positioning and navigation map are equally important. The GPS provides precise positioning and fast calculating speed while the navigation map provides huge information, data and route planning. 1.
1.2 The data of some navigation applications can be stored externally in SD card or USB drive. Note Some navigation application defaulted its route planning on the map and may not support storage in external SD Card and USB Drive. 1.3 Installation of APK Navigation Application Before navigation, please install APK Navigation Application and ensure the APK navigation map is correctly installed. 1.
2. Radio Touch the radio icon“ ” on the main interface to enter radio mode. You may also touch the radio icon at the application page. 2.1 Radio Channel Search Use the arrow icon “ ， ” at the radio interface to search for band channels. When a channel is found, the search will stop automatically and the radio will start playing.
” Slide to the left and right to adjust the media volume. Touch media volume to 2.2 Media volume“ mute. . 2.3 Band Search Touch band search to select ：FM1,FM2,FM3；AM1,AM2. 2.4 Automatic Channel Search When you touch this icon“ ”at the radio interface, the system will automatically search from low frequency to high frequency until it finds channel with the strongest signal. To stop the search, touch the icon again. 2.5 Sound settings“ 2.
2.7 Preset Radio Channel Each band can store up to 6 r123 adio channels. The system can store 24 radio channels (18 FM channels and 6 AM channels). 2.8 Preset Radio Channel Manually Long press preset radio channel button (1-6) for about 2 seconds to save the current radio channel.
3. Video Touch the music video icon at the main interface. It supports flash internal storage card, music and video stored in USB drive, ape, flac and other formats. 3.1 Video Player Interface Screen playback ratio“ Touch “ ， ” ，Loop playback“ ”. ”to switch between video，Touch to play 29 / 45 or pause the video.
Collection“ ” ，File list“ ”. 3.2 Folders and listing To refresh video listing, touch video icon followed by the refresh button “ ”. User can also access to the video folder by selecting other menu, thereafter playing the video of selection. Touch the “ ” button to search current video folder. 3.3 Video display” ”,Favorite videos” ”,History play” 30 / 45 ”.
4. Music 4.1 Cover Display The machine supports MP3 cover display. If the song comes with cover data and information, it will be shown on the cover display as per below. 4.2 Repeat and Shuffle Touch“ ” to enable and disable shuffling of songs. Touch“ 31 / 45 ”to switch on the repeat mode.
To repeat the current song →To repeat all songs. 4-3 Volume“ ” ，Sound“ or pause the Music.Collection“ ” ，Touch “ ”to switch between Music，Touch to play ， ” ，File list“ ”. 4.4 Folders and listing To refresh video listing, touch video icon followed by the refresh button “ ”. User can also access to the video folder by selecting other menu, thereafter playing the video of selection. Touch the “ ” button to search current video folder. 4.
5. Bluetooth Bluetooth's hands-free function enables you to call safely while driving. On the front panel, touch “ ”to enter bluetooth setting as shown below. 5.1 Pairing the machine with mobile phones To activate the bluetooth hands-free function, pair your mobile phone with the machine in the first place.
Search for the name of the machine. For example: BT6091. You are required to key in the corresponding PIN number i.e. 0000 on your mobile phone to connect to the machine. Once connected, a "CONNECTED" sign will appear on the screen. If the mobile phone has been already paired with the machine, user can touch “ connect to the bluetooth in the next connection. User may also touch “ 5.2 Making Phone Calls 34 / 45 ” directly to ” to disconnect.
Upon establishing the bluetooth connection, user can dial directly on the phone or key in telephone numbers on the dial pad. Touch “ ” to delete the incorrect number entered. When you entered the telephone number, press “ During conversation, user can touch “ ” to call or “ ” to hang off. ” on the screen to switch between private mode and loud speaker. 5.
The machine supports syncing of contacts from mobile phone to the machine. Once bluetooth is connected, touch“ ” to download the contacts. Once download is completed, name of the contact will be synced and shown on the display screen during phone call. For quick access to the contacts, the contact book supports name search begins with first alphabet. 5.4 Call History Call history shows outgoing call, incoming call and missed call. User can perform call or delete in call history.
5.5 Bluetooth Music This machine supports bluetooth music playing. User can play music on the mobile phone and transfer it to the loud speaker of the machine via bluetooth. It also supports simplified controls such as "Previous", "Next", "Pause" and "Play". Due to bluetooth compatibility, the machine may not support all phone models. Please contact us should you encounter problems connecting to the bluetooth.
6. AVIN Input Support This machine supports AV (Line Audio / CVBS Audio) input. Connect external AV systems to the machine via AV cable. Touch AVIN“ ” at the main interface to switch to AV input mode. 7. Display Screen Instructions 7.1 Notes Do not expose the display screen directly under the sunlight or heat for a long period of time to prevent damage to the LCD screen. Do not expose the display screen directly under sunlight when it is not in use.
Shall not interfere with the installation of airbags and other safety features or devices in the vehicles. 7.2 About LCD Small black dots or bright dots may appear on the LCD screen. This is not a defect but merely the specification of LCD. If in use in cold areas, the LCD screen may be dimmer after power on but the brightness will be adjusted to normal after a short while. If exposed directly under sunlight, user may be difficult to see the LCD screen due to reflection. 7.
8. Installation of Antenna Recommend installing the GPS antenna on dashboard or rear shelf. The antenna should be installed on leveled surface facing the sky to prevent blockage of radio waves as little as possible. Vehicle equipped with tempered glass or tint may weaken the receiving signal of the GPS antenna. Thus, recommend installing the antenna outside of the vehicle. 8.
GPS Antenna Notes Please ensure the system power is off when connecting to the GPS antenna.
Please do not shorten or extend the GPS cable. Altering the length of the cable may result in short circuit or malfunction that may damage the product. The antenna should be installed on a leveled surface where radio waves will be blocked as little as possible, otherwise it will affect the accuracy of navigation. Please do not interfere the GPS antenna with steering wheel or gear lever, as it may be dangerous.
Issues Unable to power on Cause Action (Reference) The car key is not inserted or Insert the car key and turn on ACC is not turned on the ACC The power cord is not Connect the power connected correctly The fuse is damaged Replace the similar fuse cord The system may be multi tasking (i.e.navigation). Please wait Inresponsive touch screen for a moment. If the problem persists, please contact customer service centre for assistance. No No rear view image reverse camera is installed.
reverse when position system is even feature where the rear view after not function is preset for safety reverse position booted. Power button is resuming from the to normal. priority. null GPS antenna is not connected Connect the GPS antenna correctly Drive for a distance to check No GPS signal The car may be at the GPS signal blind spot. GPS signal. If the problem persists, customer please contact service for assistance.
destination routes followed by trying possible names of the destination. If still unable to seach, the destination may not be updated in our database. The navigation system sets a route to your destination by applying certain built-in rules to the map data. Besides, Navigation routes are far distance, the navigation system will take into consideration of the road grade, traffic rules, flyover, highway, main road and others to ensure the driver in reaching the destination soonest possible.
20C
