DRIVE-Series DRIVE DUO DRIVE DUO SUV User Manual
Table of contents Important safety information....................................................................... 5 Precautions....................................................................................... 5 Declaration of conformity.................................................................... 7 Getting to know your Navman.................................................................... 8 Mounting your Navman in a vehicle.............................................................
How do I capture the GPS co-ordinates of my location?......................... 31 How do I capture a journey?.............................................................. 31 How do I navigate to a location I have captured?.................................. 32 How do I navigate to the saved car location?........................................ 32 How do I view a journey I have captured?........................................... 32 My Places...................................................................
Making a recording.......................................................................... 53 Photo mode.................................................................................... 54 Playback mode................................................................................ 54 Customising the settings................................................................... 55 How do I control my Navman using Voice Command?................................. 58 Customising the system settings...........
Playing the recording files................................................................. 89 Reference.............................................................................................. 92 About GPS and signal reception......................................................... 92 Caring for your Navman.................................................................... 92 Troubleshooting............................................................................... 93 For more information......
Important safety information • It is highly recommended for the GPS device to stay connected with the vehicle power adapter to ensure optimal performance and to enable the Traffic feature for eligible devices. • The battery is designed as a backup power source for short-term use only in the event when the vehicle's power system is not available. It is not to be used as a sole source of power for prolonged periods.
• This product is intended to be supplied by a LISTED Power Unit marked with “LPS,” “Limited Power Source” and output rated 5 V dc / 2 A. • Do not use the vehicle power adapter in a high moisture environment. Never touch the vehicle power adapter when your hands or feet are wet. • Allow adequate ventilation around the vehicle power adapter when using it to operate the device or when it is connected. Do not cover the vehicle power adapter with paper or other objects that will reduce cooling.
It is highly recommended you use your Navman only WITH AC ADAPTER (HOME CHARGER) OR THE SUPPLIED DC VEHICLE POWER ADAPTER. For more information on how to recycle your old electronic devices, please contact your local council office. You can also visit www.navman.com.au / www.navman.co.nz to view our latest trade-in offers. Declaration of conformity Note: For regulatory identification purposes: • NAVMAN DRIVE DUO is assigned a model name of N538-D5000.
Getting to know your Navman Note: Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document. Name Description ❶ Power button Turns your Navman on and off. ❷ Reset button Restarts your Navman. ❸ Speaker Sends out sounds and voice. ❹ Microphone Receives sound and voice. ❺ Touch screen Displays the output of your Navman. Tap the screen with your fingertip to select menu commands or enter information.
Mounting your Navman in a vehicle Use the provided device holder and mount to secure your Navman in your vehicle. The device will turn on automatically when connecting to the external power source. When disconnecting from the external power source, the device will enter a suspended state within 10 seconds automatically. To continue using the device, tap Yes.
CAUTION: For optimal performance of the lithium battery: • Do not connect your navman unit where the temperature is high (e.g. in direct sunlight). • There is no need to fully discharge the Navman unit. • When storing the product for a long period of time, be sure to connect your Navman at least once every two weeks. Over discharge of the Navman Unit can affect the performance.
Turning your Navman ON and OFF • For the initial start-up, briefly press the power button to turn on your Navman. Follow the prompts. The Main Menu will display. Note: The first time you use your Navman, it may take several minutes to establish a GPS connection. When you have a GPS fix, you can start to use your Navman to plan your trip. • To put your Navman in a suspended state, briefly press the power button. When you next turn it on, your Navman will return to the last screen that you used.
Connecting your device to the computer 1. Turn on your computer. 2. Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub) and plug the small end into the mini-USB connector on your Navman. Note: Reset your device if it is not recognised correctly by your computer. 3. Before disconnecting your Navman from the computer, it is recommended to safely remove the USB drive from the system. This prevents data loss on the device.
Inserting a memory card CAUTION: • Do not apply pressure to the centre of the memory card. • Inserting the card in the reverse direction may cause damage. • Do not insert or remove the memory card when the device is turned on or in the suspend mode. Hold the card (MicroSD) by the edges and gently insert it into the slot as shown in the illustration. For recording For accessing data To remove a card, gently push the top edge of the card inwards to release it, and pull it out of the slot.
Navigating on the screen To operate your Navman, touch the screen with your fingertip. You can perform the following actions: • Tap Touch the screen once with your fingertip to open items or select on-screen buttons or options. • Drag Hold your fingertip on the screen and drag up/down/left/right or across the screen. (This is not applicable to all applications.
Main Menu The Main Menu is your starting point for searching for a destination. The Main Menu also allows you to customise your Navman, view saved locations as My Place/Home, and search for POIs nearby, and so on. Tap to show the next page of Main Menu. Note: Main Menu screen options and the order of the options may differ from the above, depending on your region, maps installed or Navman model. Icon Description Search for places, areas and streets to help plan your route. Display the Map screen.
Icon Description Select your navigation mode: Car, Large Vehicle or Professional Truck. Search for information and POIs for the city you are visiting. Search for information and POIs using Lonely Planet Scenic Tours or Travel Guides. Search for information and POIs for the city you are visiting. Get help with just a phone call when your car breaks down on the road. Set or navigate to your home address. Search for the nearest petrol stations. Search for the nearest rest stops.
Navigating through the menu screens The system provides the Back button ( ) and Main Menu button ( ) in the title bar of the menu screen which allow you to navigate through the menu screens easily. You can: • Return to the previous screen by tapping the Back button. • Return to the Main Menu by tapping the Main Menu button. Note: In some menu screens, the Main Menu button will not appear in the title bar. In this instance, you may have to tap the Back button twice.
Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabets, numbers, alternate characters and combinations of these. • To select a character, tap the character. . Tap and hold • To delete a character, tap • To enter numbers, tap to delete the entire text. .
How do I go from A-B? CAUTION: For your safety, enter destination information before you start a journey. Do not enter a destination while driving. How do I use the FIND wizard? Your Navman is equipped with maps that provide street-level details for door-to-door navigation, including POIs such as accommodation, parking areas, petrol stations, railway stations and airports. The FIND wizard allows you to search the location easily. 1. On the Main Menu, tap to display the FIND screen.
How do I plan my first trip? Note: Menu displays may vary, depending on your Navman model. Using your Navman to plan your first trip is easy. There are several ways to select your destination. The following steps will show you how to plan your route by searching the address. Complete the following: If you want to… Then… calculate the route and start navigating, tap save the location as a favourite, tap . save the location as Home, tap explore the map, tap 20 . . .
How do I preview the destination on map? After searching an address (or a POI), you can preview the destination on map to explore the area near the location. 1. On the Destination screen, tap the button to display the destination preview map. 2. On the destination preview map, you can: • Tap the / button to zoom in/out the map. • View the information of your destination that is shown at the top of the Map screen.
How do I preview a route? You can plan a route in simulation mode that allows you to: • preview a route. • plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview a route. 1. On the Main Menu, tap . 2. Select a departure point through the Leaving from screen, and tap . Note: If you have a GPS fix, you can simply select the Here button ( ) so that you do not need to select a departure point.
1. On the Main Menu, tap . 2. Select your large vehicle type. • If your vehicle is up to 9 tonnes, select Large Vehicle. • If your vehicle is up to 65 tonnes, select Professional Truck. 3.
How do I view my route? How do I select the route type? Note: This feature is not available on all models. Depending on your Navman model, the Select Route Type screen may be displayed when you tap from the Destination screen. All of the four route types (Fastest, Economical, Easiest, and Shortest) will be calculated. Select your preferred route and tap to start navigating.
Item Rest stops Description Search for the nearest rest stops. Note: This feature is not available on all models. Current route Current position Your current route is highlighted. Driving Recorder The status of your drive recording. Your current position is marked with • : not recording. • : continuous recording. • : emergency/event recording. . Tap to access the following options: • : changes to the recording screen. Voice command • : stops the recording.
How do I view my route statistics? 1. From the Map options screen, tap . 2. Tap the tabs in the title bar to view the additional information in the different screens. 3.
If you want to… Then… increase/decrease the volume, tap / . The volume bar indicates the current volume level. mute/unmute, . tap The speaker icon indicates the status: : muted : unmuted How do I zoom in/out the map? 1. From the Map options screen, tap . 2. The zoom buttons will be displayed on the Map screen in translucent mode. Note: The zoom buttons will automatically disappear after the map is idled for 5 seconds. 3.
My Drive Note: This feature is not available on all models. With My Drive technology, your Navman includes an intelligent capability that learns and adapts to your personal driving style. Over time, your Navman learns your preference for road types and driving speeds, turns and more. Your Navman will save the information and provide a more personalised route and accurate time of arrival the next time you plan a trip.
How do I create a trip with multiple stops? Note: Trip Planner is not available on all models and is only available in selected countries. Depending on your Navman model, you may be able to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. 1. On the Main Menu, tap . 2. Tap Create New Trip. 3. Tap Add. Use the FIND address wizard, Explore map, My Places/Recent Locations menu or Here/Return to start to set the waypoint. 4.
If you want to… Then… edit the trip, tap Edit, then you can: • optimise your trip by selecting Optimise. • change the trip title by selecting Rename. • delete the planned trip by selecting Delete. Note: The Optimise function does not take all the factors into account. Your waypoints might be reordered to reduce your estimated travel distance. Be sure to confirm the trip on the map and make adjustments as appropriate, particularly if your trip returns to the start location.
How do I capture a location or a journey? Note: The capture functionality is not available on all models. Your Navman may have a capture feature which allows you to record GPS co-ordinates of a location and capture a journey, and save them so you can navigate back at a later time. How do I capture the GPS co-ordinates of my location? 1. On the Main Menu, tap . 2. Tap Save, or wait for 5 seconds. You will hear a shutter sound to indicate that the GPS co-ordinates have been saved.
How do I navigate to a location I have captured? 1. On the Main Menu, tap . 2. Tap the captured destination you want to travel to ( 3. Tap ). . Your Navman will calculate a route from your current location. How do I navigate to the saved car location? Note: This feature may not be available for all models. 1. On the Main Menu, tap . 2. Tap Find My Car. 3. Tap . Your Navman will calculate a route from your current location. How do I view a journey I have captured? 1. On the Main Menu, tap . 2.
My Places My Places has all your saved locations. How do I save a location as My Place or Home? 1. Search for an address until the Preview screen is displayed. 2. Tap . The location will be added to My Places. 3. To save the location as Home, tap . The location will be set as Home. How do I navigate to a location I have saved? 1. On the Main Menu, tap . 2. Tap the Sort by button to change the sorting order of the items: : by time : by name : by type 3.
How do I navigate to Home? If you have not set an address as Home, the first time you try to navigate to Home you will be prompted to search for an address using the address-entry wizard. 1. On the Main Menu, tap . 2. Tap . 3. Tap . Your Navman will calculate a route from your current location. Once your home has been set on your Navman, simply tap you will be directed to Home.
If you want to… Then… delete the location, tap . How do I navigate to a NavPix™? Note: NavPix™ is not available on all models and is only available in selected countries. NavPix™ is an image or picture, normally of a location, which contains embedded GPS co-ordinates that you can navigate to. To navigate to a NavPix™ location, either a GPS fix must have been available when the NavPix™ was taken, or GPS co-ordinates have been added using NavDesk.
Item Description Displays all images in the album as a full screen slideshow. Slide show 4. Tap the desired thumbnail to open the NavPix™ in full screen. Item Description Tap to return to the previous screen. / Tap to display the previous/next NavPix™. / Tap to start/stop slideshow. Tap to calculate the route, open the Map screen and start navigating. Tap to display the NavPix™ Details screen. How do I edit the NavPix™? 1.
If you want to… Then… edit the NavPix™, tap . . • To save the location as Home, tap • To rename the title of the NavPix™, tap • To delete the NavPix™, tap explore the map, tap . . .
How do I search for a POI? A POI (Point of Interest) is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by category, such as petrol stations, parks, beaches and museums. Your Navman may provide several ways to search for the nearby POIs.
Item Description / To zoom in or out, tap and hold or . Zooming in or out will decrease or increase the area contained within the Explore area. Tap to set POI preferences. How do I find a POI using the POI cluster? Tapping on the selected POI will bring up the screen with the POI destination details. Complete the following: If you want to… Then… calculate the route and start navigating, tap save the location as a favourite, tap explore the map, tap .
2. Complete the following: If you want to… Then… display all POI icons, tap Show all. display no POI icons, tap Hide all. Note: Hiding POIs will stop you from finding them when using explore mode/cluster search. select a specific POI icon for display, tap the required POI category to show ( hide ( ) on the Map screen. ) or Repeat until all required categories are selected. return to the Explore map, tap . • Your preferences are automatically saved.
If you want to… Then… search for the nearest banks and ATMs, tap . 2. A list of the selected POI category based upon your current location is displayed. 3. Select the desired item to display the destination screen. 4. Complete the following: If you want to… Then… calculate the route and start navigating, tap save the location as a favourite, tap explore the map, tap . place a phone call to the POI, tap . . .
If you want to… Then… search for petrol stations, tap search for parking places, tap view more POI types, tap search for hotels and motels, tap search for banks and ATMs, tap . search for emergency services, tap . . . and select a POI type. . 5. Tap the desired item from the list. 6. Complete the following: If you want to… Then… calculate the route and start navigating, tap save the location as a favourite, tap explore the map, tap . place a phone call to the POI, tap . . .
If you want to… Then… place a phone call to the POI, tap . Note: This feature is not available on all models and is only shown when the phone number of the POI is available.
How do I receive current traffic information via TMC? Note: Traffic information is not available on all models and is only available in selected countries. The Traffic Message Channel (TMC) broadcasts real-time traffic information via the FM Radio Data System (RDS). FM radio stations transmit TMC data on a cycle of several minutes, with hundreds of events able to be broadcast to TMC receivers.
Item Description Tap to return to the previous screen. Event icon Displays an icon to indicate type of event. Current position Your current position is marked with To zoom in or out, tap and hold / . or . Tap to change the display between the Traffic, All traffic events, and Traffic Options windows. Title bar tabs How do I view a list of all events on my route? Your Navman creates a list of events as they are received on the All traffic events screen.
How do I view the traffic details? On the All traffic events screen, tap the event you want to view. Item Description Tap to return to the previous screen. Event icon and description Displays details of the event, including: • Name of road and direction in which the event is taking place. • Location of where the event begins and ends. • > indicates an event from a location, to a location. • < > indicates an event between locations. • Type of event.
Traffic messages The Event Details screen displays detour status information. Detour not available If a detour is not available, one of the following messages will display: Message Description This event is not locatable A specific location for the event cannot be identified. This clearance is not locatable This event does not affect your route This clearance does not affect your route The event is not on the current leg of your journey, or is behind your current position.
Traffic service 1. On the Traffic Options screen, tap Traffic Service. The screen displays the frequency of the radio station currently used to receive traffic event information. A bar shows the strength of the traffic signal being received; the more green bars, the stronger the signal. 2. To change your preferred radio station, select your preferred radio station from the list. You can select Automatic to receive the traffic signal automatically.
What is Travel Book? Note: This feature is not available on all models. Travel Book is a collection of city guides that provide detailed POI maps for major cities in the local region. The city guides provide information on accommodation, dining, night life, business essentials, shopping, important tourist spots and practical information such as banks, medical centres, bus stations, etc. Note: Travel Book is provided by third party.
How do I use the Bluetooth function? Note: This feature is not available on all models. If you have a compatible mobile phone with Bluetooth wireless technology, you can use your Navman as a hands-free car kit. Note: A list of compatible mobile phones is listed at www.navman.com.au (Australia) or www.navman.co.nz (New Zealand). How do I pair my Navman with a Bluetooth device? 1. On the Main Menu, tap Bluetooth. 2. Tap On to turn on the Bluetooth of your Navman. 3.
3. Enter the number you want to call. . To delete the last digit entered, tap Note: International calls require a country code to be included in the phone number. On your Navman, the country code is separated from the rest of the number sequence by a + sign. If you are making an international call, tap and hold 0 until the + sign displays. 4. Tap to place the call. Making a call from the phonebook 1. On the Main Menu, tap 2. From the Phone screen, tap . . 3.
• To transfer the call to your phone, tap Voice to Phone. • To adjust the volume, tap on the volume bar to increase or decrease the volume. Note: The phone volume adjustment does not change the device volume. • To end the call, tap Hang Up. How do I view my call history? From the Phone screen, tap . The Call History screen lists the calls made during the time your Navman is connected to a mobile phone. Numbers are arranged by time with the most recent time at the top.
Recording your driving Precautions and notices • Make sure that no object is blocking the camera lens and no reflective material appears near the lens. Please keep the lens clean. • If the car’s windscreen is tinted with a coating, it may impact the recording quality. • Minor accidents may not trigger event recording. • To ensure the optimal recording angle, pay attention to the following: • Make sure that your car is parked on a level ground.
• an event happens (such as sudden impact, high-speed driving, an overdone turn or an accidental crash) during recording for the G sensor to prompt the device to start an event recording automatically. The recording proceeds in a continuous mode and is divided into several temporary video clips (segments). The recording will not stop between video clips. If continuous recording is ongoing but there is not enough space on your memory card, new video clips will replace the old ones.
• Tap / when playback is paused to adjust the volume level. • Tap to delete the current file. • Tap to move the current recording to the emergency/event folder. Note: If you encounter problems when deleting a recording, delete it in File Explorer on your computer instead. Customising the settings To access the dash cam settings, tap anywhere on the screen and then tap To exit the settings, tap . .
Category Item Description Driving Assistance Calibration Follow the steps to calibrate the system: 1. Drive the vehicle in the middle of the lane. 2. Ask a passenger to select this option and then follow the on-screen instructions to complete calibration. You are advised to calibrate the system constantly in order to be alerted correctly. Device mounting height Sets the height of the device when it is mounted in the vehicle.
Category Item Description System Format Formats a MicroSD card for recording-specific purposes. (All data will be erased.) Restore to defaults Restores system settings to factory defaults. Version Displays the software information. Firmware update Allows you to update the camera firmware of your device. Note: You need to store the firmware files on a MicroSD card and insert it in the data card slot on the left side of the device.
How do I control my Navman using Voice Command? Note: Voice Command is not available on all models and is only available in selected countries. Voice Command is a tool that allows you to complete a task without touching the screen. Note: Voice Command requires the respective voice file, English (AUS) or English (UK/NZ), installed and used on your Navman. For further instructions on installing your preferred language, see the "Voice Command" section in “What is the NavDesk?” 1. On the Main Menu, tap .
Customising the system settings Note: Depending on your Navman model, certain features and setting options may not be available. There are various customisation options available to enhance your navigation experience. 1. On the Main Menu, tap . 2. Select the option you want to customise. 3. Once you change the settings and return to the previous screen, your preferences are automatically saved.
If you want to… Then… change the screen brightness in day/night tap mode, bar. / on the Day brightness/Night brightness The brightness bar indicates the brightness level. Note: You can simply tap on the brightness bar and the screen brightness will be set immediately at the position you tapped. Note: Your Navman can heat up when the brightness scale is set high, therefore, use lower brightness whenever acceptable.
If you want to… Then… set how you want to receive the driver alerts, tap Driver Alert to select: • Auto (default): When the driving speed is above 80 km/h, the audio and visual alerts of all driver alert options will be enabled automatically. When the driving speed is below 80 km/h, the audio and visual alerts for overtaking lane and merging lane options will be enabled, but all other driver alerts will have visual alert only.
If you want to… Then… set the routing preferences, tap Advanced routing to turn the Smart Routes function on or off. • Use historic traffic speed data: enable/disable the Smart Routes function. • Use learned driver behaviour: enable/disable the My Drive function. set the avoidance manually, • Driving speed records: display the information of your driving speed on a motorway / highway / major road / minor road. tap Custom Avoidance.
If you want to… Then… display “no entry” icons on “no entry” roads on the Map screen, tap Show no-entry road signs to turn it on. display 3D landmarks on your route, tap 3D landmarks to show or hide 3D landmarks. When turned on, the map display performance can slow down due to the number of no entry roads in some major cities. Note: This feature is not available on all models and is only available in selected countries.
If you want to… Then… change the date format, tap Date format and then select your preferred date format type. Time Zone If you want to… Then… set the time zone automatically, select Auto time zone. change the time zone manually, select Manual time zone, then adjust the setting by / . tapping Bluetooth Note: This feature is not available on all models. The Bluetooth option allows you to pair a Bluetooth mobile phone with your Navman. For the compatibility list, visit: www.navman.com.
If you want to… Then… restore factory default settings, tap Restore factory defaults. When the warning dialog box displays, tap Yes. Your Navman will restart. This option allows you to restore default factory settings; the recent locations, saved My Places destinations and My Drive profile on the device will be deleted. reset the GPS, tap Reset GPS. When the warning dialog box displays, tap Yes. Note: Occasionally, the GPS fix may need to be reset.
What is NavDesk? NavDesk is a suite of tools you can use to access greater functionality and product information via your computer.
For Mac systems: 1. Close all programs on your computer. 2. Insert the NavDesk Application Installer DVD into your computer DVD drive. 3. In Finder, access the NavDesk directory of the DVD. 4. Drag and drop the NavDesk vx.xx.xxxx(Mac).mpkg.zip file to the desktop. 5. Double-click the NavDesk vx.xx.xxxx(Mac).mpkg.zip file. 6. Access and double-click the NavDesk vx.xx.xxxx(Mac).mpkg file on the desktop. 7. Follow the on-screen prompts to install NavDesk. 8. You can access NavDesk in LaunchPad.
Name Description PC My Places View and modify all places including addresses, POIs, NavPix™, and others added using NavDesk and stored on your Navman. √ Trip Planner Add or begin a planned trip with multiple waypoints on √ your computer, and then save the trip to your Navman. MY Navman A collection of applications that allow you to configure NavDesk, download updates, and transfer data to and from your Navman.
How do I activate my subscription? NavDesk Unlock Features 1. Enter your product key. 2. Follow the prompts to activate your subscription. How do I update subscriptions on my Navman? The My Subscriptions section will display a list of subscriptions already installed on your Navman: Icon Description Red Expired subscriptions. Right-click to purchase a new subscription. Yellow Available subscriptions. Right-click to update and purchase a new subscription. Green Active subscriptions.
Name Loadable Maps Description A list of maps on the DVD or available for purchase via the Navman Store website. Note: Map installation from the DVD is not available for Mac systems. Remove map My Navman Click to remove the selected map from your Navman. A list of maps installed on your Navman. How do I install maps onto my Navman? Your Navman comes with one or more pre-activated maps. Map files take up space on your Navman’s internal memory.
• The maps that require activation before being installed to your Navman are red. • The maps that are available for purchase from Navman are blue. Note: If your computer opens Windows Explorer when the DVD is inserted, close the Windows Explorer window. 3. Complete the following: If the map to be installed is… Then… Yellow go to step 6. Red the map needs to be activated via the Internet before it can be installed; continue to step 4. 4.
3. Click Remove Maps to remove the selected maps. 4. Confirm that you want to remove the selected map when prompted. The map is removed from your Navman. You can reinstall these maps at any time via NavDesk. Voice Command NavDesk VOICE COMMAND Depending on your Navman model, you may be able to set the destination quickly by using Voice Command. NavDesk's Voice Command allows you to install or remove voice files on your Navman. Note: You can download and install free Voice Command updates when available.
Custom POIs NavDesk Custom POIs The Custom POIs application allows you to create or import your own POI files. These are called custom POIs. Unlike preinstalled POIs, custom POIs can be removed from your Navman and can have audio as well as visual alerts associated with them. To create your POI files, open Microsoft Excel and then enter the POI location details (including the longitude, latitude, name, and description) in separate cells.
If you want to… Then… use an existing custom POI category, select Existing category, then select a type from the drop-down list. replace an existing POI, select Existing category and a type from the dropdown list, then select Replace existing POIs. Note: If you want to create a new POI instead, then select Add to existing POIs. create a new custom POI category, select New category, then type a name for the POI category. 4.
How do I delete a custom POI file/category from my Navman? 1. In the Installed POIs section, click Delete next to the file name. The file is removed from the list, but is not yet deleted. 2. Accept the warning message. The selected file/category is deleted. Photo Album NavDesk Photo Album Photo Album is a NavDesk application which allows you to copy, delete or move pictures or albums between the NavPix™ library on your Navman and the NavPix™ library on your computer.
Name Description Selected picture When a thumbnail is selected, it displays with a blue border. Toolbar Name Description Create new album Click to create a new album in the NavPix™ library you are viewing. Add to My Places Click to transfer NavPix™ to My Places. • If you are viewing NavPix™ in the NavPix™ library on your Transfer to your computer, this will display as Transfer to your Navman. Navman Click to transfer the selected NavPix™ to your Navman.
If you want to… Then… remove a picture from an album, in the Desktop albums section, select the album containing the NavPix™ you want to remove. Right-click on the selected picture and select Remove from album. Note: If you want to delete the NavPix™ from all albums, rightclick on the selected picture and select Delete NavPix, or simply click the Delete NavPix icon on the toolbar.
If you want to… Then… receive a warning message before deleting an image from your NavPix™ library, select the Warn me when permanently deleting a NavPix from my library checkbox. create a new folder every time you import new photos, select the Import photos to a new album checkbox. view NavPix™ when on a route, select the Show NavPix on map checkbox.
• Click the Add to My Places button. • Right-click on the selected picture and then select Add to My Places. Unlock Features NavDesk Unlock Features If you have purchased a map unlock code or subscriptions for your Navman, you have to enter the activation key using the Unlock Features application. Note: Make sure you have an active Internet connection for this feature. Note: The activation key will be sent to you by email. You can click the provided link to purchase an activation key online.
To redeem Navman’s lifetime map update service, you need to enter the product key using the Redeem application. Please note that the product key can only be used once and is not transferable. Note: Make sure you have an active Internet connection for this feature. Note: This feature is not required for selected models. My Places NavDesk MY PLACES My Places includes saved addresses, captured journeys, POIs, NavPix™, and other locations. You can select, modify and delete places.
Note: You can install a maximum of 99 locations on your Navman via My Places. How do I sort My Place locations? You can sort My Place locations by type and name: If you want to… Then… sort My Place locations by type, click Type on the My Places panel. sort My Place locations by name, click Name on the My Places panel. How do I import or export a location? Complete the following: If you want to… Then… import a location from the computer from the My Places panel, click Import.
If you want to… Then… share the location, . click An email will open ready to send to your friends. Your friend will receive the email with links to either save the image or to save the location in My Places in NavDesk. Note: If the location is a NavPix™, your friend will receive the image as an attachment to the email. Note: If the location is a captured journey, your friend will receive the journey as a *.KMZ file attached to the email.
Name Display area Description Display the route on the map. Note: You can also plan your route directly on the map. How do I pre-plan a route by search? 1. From the Route planner panel, set your From and To points. You can find a location by: : Keyword : Address : Postcode to start a search. You may need to select from a Enter your text for search and click category list to narrow your search results. 2. Complete the following: If you want to… Then… add a waypoint, click Add Waypoint.
3. The cursor will be marked with “Click to set destination.” You can: • Move the cursor and then click on the map to set the waypoint. • Move the cursor and then double-click on the map to set the To point. 4. When done, click Save this route. The route is saved to the Pre-Planned Routes section and your Navman simultaneously. How do I edit a route? 1. From the Pre-Planned Routes section, select a route to edit. 2.
How do I register my Navman and set a PIN? PIN is a NavDesk application that allows you to set a security PIN on your Navman. The PIN will disable your Navman in the event of theft. To set a PIN, you must first register your Navman on Navman’s website. 1. Click PIN. 2. Click Register now and follow the prompts to complete the registration form online. 3. When the registration is complete, click I have registered my Navman. 4.
Name Timeframe Description Specifies the time for which the mileage report will be created when Show only is selected. Select Show All to include all recorded mileage. Report panel Displays your trip log data. Report data Import report data from your Navman, clear all report data from your Navman or export data to a report (.csv and .HTML). Fuel Select to include the amount of fuel (estimate) used for the mileage recorded.
3. The available data will be displayed in the Maps and Voices fields. Select the desired data and click Recover to recover the data on your Navman. How do I update my Navman? Occasionally Navman may offer you free updates, including software applications, maps, and more. You can check the available updates via the Device Updates function. 1. If a free update is available and your Navman is connected to your computer, a message will display when you start NavDesk.
2. Complete the following: If you want to… Then… keep NavDesk updated, click General, and then select the Auto check for updates checkbox. When you select this option, every time you open NavDesk, the available service packs and bug fixes will be downloaded from the Navman server and applied to your Navman. change the units of measurement that NavDesk uses, click General, and then: • Select or clear the Use metric units checkbox to change between imperial and metric units.
MiVue Manager MiVue Manager™ is a tool for you to view the videos recorded on your Navman. Note: Not all features are available for every model. Installing MiVue Manager The MiVue Manager software is available on the supplied DVD for Windows and Mac. Alternatively you can download MiVue Manager from the website (https://www.navman. com.au/mapping). Double-click Mivue Manager x_x_xx_xx.exe (Win) / Mivue Manager x_x_x_xx.dmg (Mac) and follow the on-screen prompts to install MiVue Manager.
Toolbar Calendar Playback screen File type File list Playback controls Dashboard panel G sensor chart 3. By default, MiVue Manager shows the calendar and the file list on the right. • You can click on the upper-left corner to select the folder that stores the recording files. • When a recording file exists, you will see the date marked with “•.” Click that date to display the files that were recorded on that date.
No. ❼ Description Displays the playback progress. You can click on a point along the track bar to move directly to a different location for the playback. 5. During playback, you can check more driving information from the dashboard panel and the G sensor chart that are displayed below the playback screen. On the dashboard panel, click to display the map screen. Note: The Map screen may not display when the computer is not connected to the Internet or when your model does not support the GPS function.
Reference About GPS and signal reception The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location.
• Do not use paper towels to clean the screen. • Never attempt to disassemble, repair or make any modifications to your Navman. Disassembly, modification or any attempt at repair could cause damage to your Navman and even bodily injury or property damage and will void any warranty. • Do not store or carry flammable liquids, gases or explosive materials in the same compartment as your Navman, its parts or accessories.
Problem Solution My unit keeps displaying battery low. Power your unit through a USB cable connected to a computer for 8 hours. Ensure the device is turned on and is displaying the USB connection screen. 94 If it is still displaying battery low after following this process, contact our technical support team.
For more information Online support For 24/7 help and support with Navman products, visit our Technical Support Website: www.navman.com.au (Australia), or www.navman.co.nz (New Zealand). Navman customer support If you have a faulty product or you would like to speak to a member of our Technical Support team, contact: Australia: 1300 NAVMAN (1300 628 626), or visit www.navman.com.au New Zealand: 0800 GO NAVM (0800 466 286), or visit www.navman.co.
POI categories Icon 96 Description Airport Icon Description Amusement park Art centre ATM/Cash dispenser Bank Bar/Pub Beach Breakdown service/Car repair facility Bowling centre Business facility or company Business office Bus station Camping ground Car dealer/Automobile dealer Casino Cemetery Church Cinema City hall City, town or village Coffee shop College/University Community centre Commuter railway station Courthouse Dentist Doctor Embassy Exhibition centre Ferry terminal
Icon Description Parking garage Icon Description Park/Recreation area Performance art/Theatre Petrol station Pharmacy Place of worship Police station Post office Public restroom/Toilet facilities Public sport airport Railway crossing Rental car agency Rest area Restaurant Road accident black spot Scenic/Panoramic views School School zone Shop Shopping Ski resort/Ski lift station Speed check Sport centre Sports hall Sports complex Stadium Tennis court Travel agency Transport fer
My Places categories Icon Description Home Saved locations Captured journey Traffic and other TMC events Each TMC Event is sorted in to one of nine categories. When an Event is received, one of the following icons will display: Event Avoided Event Message Type Event Description Danger There is a dangerous situation on the route; for example, people are on the road. Traffic Any event that will cause a delay on a route.
Revision: R01 (7/2017) Trademarks All brand and product names are trademarks or registered trademarks of their respective companies. Disclaimer Specifications and documents are subject to change without notice. Notes Not all models are available in all regions. Depending on the specific model purchased, the colour and look of your device and accessories may not exactly match the graphics shown in this document. The screenshots and other presentations shown in this document are for reference only.
