User Manual

Connecting your device to the computer

1. Turnonyourcomputer.

2. PlugthelargeendoftheUSBcabledirectlyintoaUSBportonyourcomputer(nota

USBhub)andplugthesmallendintothemini-USBconnectoronyourNavman.

Note: Resetyourdeviceifitisnotrecognisedcorrectlybyyourcomputer.

3. BeforedisconnectingyourNavmanfromthecomputer,itisrecommendedtosafely

removetheUSBdrivefromthesystem.Thispreventsdatalossonthedevice.

CAUTION:

•WhenyourNavmanisturnedonandconnectedtoacomputer,itisrecognisedasanexternal

mass-storagedevice.DoNOTdeleteanylesthatarepre-installedonyourNavman.Deleting

thelescancauseyourNavmantocrash.Navmanisnotresponsibleforproductqualitycaused

byledeletion.

•DonotconnecttheUSBcableintotheRearDashCamconnectorportasyourcomputerwill

notrecognisethedevice.