F10 User Manual en English - Europe/Australia/New Zealand
F10 Important Safety Information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
F10 Internal battery-specific safety information The Navman contains a non-replaceable internal lithium-ion polymer battery. The battery may burst or explode if mishandled, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery. Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in fire or water.
F10 Contents Important Safety Information..................................................................................................................2 Welcome................................................................................................................................................6 Important information for using the manual .......................................................................................6 Getting to know your Navman .........................................
F10 Select Map 3/3............................................................................................................................49 Map POIs........................................................................................................................................50 Volume ...........................................................................................................................................51 Screen ...............................................................
F10 Welcome Thank you for purchasing this Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual.
F10 Getting to know your Navman We recommend that you familiarize yourself with the Navman's basic operations. Components Component Description Battery Indicator Indicates the level of battery charge: Green - battery full Orange - battery charging. Turns the Navman on or off. For more information, see” How do I turn my Navman off?” on page 10. Connection socket for GPS MMCX External Antenna (not included). To access the socket, gently lift the rubber cover.
F10 How do I get started? Note: Before you begin, check if your vehicle is fitted with a heat-reflective or heated windscreen. If so, you may need to purchase an external antenna for your Navman to receive GPS signals. The first time you use your Navman, it may take up to 15 minutes to establish a GPS connection. For more information about GPS, see “How do I navigate with GPS?” on page 16. How do I turn my Navman on for the first time? To get started for the first time, complete the following steps: 1.
F10 3. Turn your Navman on to turn your Navman on. Press and hold Your Navman will turn on and display the Language screen. 4. Select your preferred language From the Select Language screen, tap your preferred language. 5. To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up check box. You can change your preferred language while using your Navman (see "Language" on page 56).
F10 How do I adjust the volume? The volume on your Navman can be adjusted by the volume control on the Volume preference screen. To mute the volume from the map screens, tap To adjust the volume, tap and hold and then tap . to display the Volume preference screen. For more information on how to adjust the volume on your Navman, see “Volume” on page 51. How do I monitor the battery status? Your Navman has an internal battery that when fully charged, should provide power for up to 3 hours.
F10 How do I turn my Navman off? To turn your Navman off, press and hold . Power-saving standby mode To enter standby mode, press To end standby mode, press . again. When your Navman enters standby mode, the screen will turn off. When you turn your Navman on again, it will display the screen you were last viewing. To save power, your Navman will automatically enter standby mode after a pre-determined period of time. You can change the default standby mode setting at the Power preference screen.
F10 What are the main screens I will use? Main Menu screen The Main Menu screen is your starting point for searching for a destination. The Main Menu can be accessed from the map screens by tapping any screen.
F10 How do I navigate with GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location.
F10 How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ... Then ... know the address of your destination use the address-entry wizard to enter the address want to make multiple stops need to find a named site, feature, landmark or public venue see "How do I search for an address?" on page 15.
F10 How do I search for an address? Enter a destination using the Destination Search, Keyboard and Preview screens, which used together form an address-entry wizard. This section provides a case study to help guide you through setting your destination. Note: In some countries, you can search for your destination by postcode or zip code.
F10 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap The Select a country screen will display. b) Select United Kingdom from the list. The Destination Search screen will display. . 3. Search for the City/Area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display.
F10 Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display. The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabet, number, alternate characters and combinations of these.
F10 b) Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name. c) Use the Keyboard screen to enter 12 as the house number of your destination. The Preview screen will display.
F10 How do I create a trip with multiple stops? You can use the Multi-stop Trip Planner screen to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. Waypoints can be added via the Multi-stop Trip Planner screen or by selecting Location, then Add to Trip from the pop-up Map menu on the 2D Map or 3D Map screen. You can save up to 198 multi-stop trips, each with up to 14 waypoints.
F10 a) Tap Add. The Add to Trip Menu will display. b) Tap Address. The Destination Search screen will open. Note: You can also add waypoints using favourites, recent destinations and POI locations. 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap The Select a country screen will display.
F10 4. Search for the street name and house number a) From the Destination Search screen, tap Street Address. The Keyboard screen will display. b) Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name.
F10 If you want to ... Then ... navigate to your selected destination tap . The Preview screen will display. . tap The 3D Map screen will display the calculated route. tap a destination point to move. The Preview screen will display. tap Up or Down. The Multi-stop Trip Planner screen will redisplay. change the order of your waypoints delete all waypoints tap Clear. delete one waypoint save the multi-stop trip as a favourite 22 tap a destination point to delete.
F10 How do I skip a waypoint during a multi-stop trip? To skip a waypoint during a multi-stop trip, complete the following: 1. Tap the map. The Map Menu will display. 2. Tap Route, then Skip Waypoint. The next waypoint will be skipped and the route recalculated to the following waypoint.
F10 How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as petrol stations, parks, beaches and museums. Select a POI using the Destination Search, Keyboard and Preview screens, which used together form a POI-entry wizard. This section provides a case study to help guide you through finding or setting your POI as a destination. Quick Steps 1.
F10 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap The Select a country screen will display. b) Select United Kingdom from the list. The Destination Search screen will display. . 3. Search for the city/area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display.
F10 b) Use the Keyboard screen to search for Waterloo Railway Station as your destination, then tap the search result. The Preview screen will display. c) Complete one of the following: If you want to ... Then ... navigate to your selected destination . tap Your route is calculated and displayed on the 3D Map screen. view your position on the map screen tap the map to display the position on the 2D Map screen.. view more information about your destination tap More.
F10 How do I save Favourites and My Home? You can save up to 200 destinations as favourites, one of which can be saved as My Home. You can save a favourite from the Preview screen after searching for an address, or from the Map Menu on the 3D or 2D Map screens. For more information, see "How do I use the Map Menu?" on page 39. How do I save a Favourite or My Home? 1. Search for an address until the Preview screen is displayed. 2. Tap Save. The New Favourite screen will display. 3.
F10 How do I navigate to a Favourite? 1. Tap the Favourite destination you want to travel to. The Preview screen will display. 2. Tap . Your Navman will calculate the route from your current location. The 3D Map screen will display. How do I navigate to My Home? If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to search for an address using the address-entry wizard.
F10 How do I edit the name of a Favourite? 1. From the Favourite Destinations screen, select a favourite to edit. The Favourite Preview screen will display. 2. Tap Edit. The Edit Name screen will display. 3. To edit the name of the favourite, tap 4. After you have edited the favourite name, tap The Edit Name screen will display. 5. Complete one of the following: . . If you want to ... Then ... rename the Favourite tap Save. The favourite is saved. The Favourite Preview screen will display.
F10 How do I navigate to a recent location? To make navigating to an address easier, your Navman will automatically save all your start locations and destinations in a list of recent locations. 1. Tap a recent location. The Preview screen will display. 2. Complete one of the following: If you want to ... Then ... calculate the route and open the 3D Map screen Tap . The 3D Map screen will display. view the full address details of the recent location save the recent location as My Home tap More.
F10 How do I view my route? When a route has been calculated, the 3D Map screen will display. You will be directed to your destination by spoken and visual instructions. The Map button cycles through the 3D Map, 2D Map, Route Overview and Turn-by-Turn screens. 3D Map screen The 3D Map screen displays your current position and follows your direction of travel. Tap and drag the screen, to move across the map. Tap the map to view the Map Menu (see "How do I use the Map Menu?" on page 39).
F10 Item Zoom Description To view zoom options, tap To zoom out, tap To zoom in, tap . . . Map The Map button allows you to cycle through different map screens. Mute/unmute volume, battery, GPS and compass information Tap to expand and see the following options: Mute/unmute volume Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable.
F10 2D Map screen The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. The 2D Map screen follows your direction of travel unless the Map Display preference is set to North (see “Map Display” page 48). Tap and drag the screen, to move across the map. Tap the map, to view the Map Menu (see "How do I use the Map Menu?" on page 39).
F10 Item Description Map The Map button allows you to cycle through different map screens. Mute/unmute volume, battery, GPS and compass information Tap to expand and see the following options: Mute/unmute volume Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a GPS fix between one and four green vertical bars are displayed.
F10 Route Overview screen The Route Overview screen gives you a bird’s eye view of your trip. Note: A route must first have been calculated for this screen to be available. Tap and drag the screen, to move across the map. Tap the map to view the Map Menu (see "How do I use the Map Menu?" on page 39). Item Description Your final destination. Next instruction The direction and name of the street to turn in to. Note: To repeat the spoken prompt of your next turn, tap the turn arrow.
F10 Item Zoom Description To view zoom options, tap To zoom out, tap To zoom in, tap . . . Map The Map button allows you to cycle through different map screens. Mute/unmute volume, battery, GPS and compass information Tap to expand and see the following options: Mute/unmute volume Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable.
F10 Turn-by-Turn screen The Turn-by-Turn screen displays the next four turns of your route, the turn direction, the street name and the distance to the turn. You can view all the turns in the list, using the up and down arrows. A route must first have been calculated for this screen to be available. Item Direction of turn Description The direction of the turn. Your next turn is highlighted. Note: To Repeat the spoken prompt of your next turn, tap the turn arrow.
F10 Item Description Mute/unmute volume, battery, GPS and compass information Tap to expand and see the following options: Mute/unmute volume Battery charge indicator GPS status indicator The icon displays green when a GPS fix is established and red when a GPS fix is unavailable. To indicate the reception strength of a GPS fix between one and four green vertical bars are displayed.
F10 How do I use the Map Menu? The Map Menu allows you to access navigational functions from the 3D Map and 2D Map screens. Displaying the Map Menu 1. Tap 2. Tap and drag to move around the map to your selected location. 3. Tap the map. The Map Menu will display. to display the 3D Map or 2D Map screen. Map Menu options The following options are available via the Map Menu: Menu Option Description Navigate To Calculates a route from your current location, if your Navman has a GPS fix.
F10 How do I avoid an area? Your Navman can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded areas. CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail. CAUTION If your destination is in an Avoid Area, you will be routed into that Avoid Area. How do I add an Avoid Area? 1. Tap the 3D Map or 2D Map screen to display the Map Menu. 2. Select Avoid Area. 3.
F10 How do I preview a route? Route demonstration allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview one route. To always preview your route, see "Data Recording 4/4" on page 46. 1. Select a departure point If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start elsewhere.
F10 What can I customize? There are various customization options available to enhance your navigation experience. The Preferences menu screens are accessed by pressing To move forward through the Preferences screens, tap To revisit the previous screen, tap 42 . .
F10 Route Options You can enhance your navigation experience by modifying aspects of your route and route calculation. Route Calculation 1/4 Complete the following: If you want to... Then... change the route type move the Route Type slider towards Fastest time to give high priority to the fastest time when calculating a route. move the Route Type slider towards Shortest distance to give high priority to the shortest distance when calculating a route.
F10 Road Types 2/4 Complete the following: If you want to... Then... avoid toll roads select the Toll roads check box in the Avoid column. receive a warning if your route includes toll roads select the Toll roads check box in the Warn column. The warning will display at the start of every trip containing a toll road. avoid unsurfaced roads select the Unsurfaced roads check box in the Avoid column.
F10 Driver Alerts 3/4 Complete the following: If you want to... Then... enable a visual warning if the Main Menu screen is accessed in a moving vehicle select the Warn me not to operate my Navman while driving check box. enable a warning chime when travelling at or above a designated speed select the Alert me when my speed exceeds check box. select your preferred speed select your preferred speed from the Speed box. Your preferences are automatically saved.
F10 Data Recording 4/4 Complete the following: If you want to... Then... record a GPS log of your trips select the Enable GPS data logging check box. 46 Your preferences are automatically saved.
F10 Map Display You can change the look and behaviour of the Map screens by customizing the Map Display preferences. Map Display 1/3 Complete the following: If you want to... Then... change the map colour scheme select your preferred scheme from the Map Scheme box. set the screen contrast to automatically adjust select the Auto day/night option. improve screen contrast in light or dark conditions select either the Day or the Night option to manually adjust the contrast.
F10 Map Display 2/3 Complete the following: If you want to... Then... enable automatic zooming during navigation select the Auto-zoom on main map screens check box. If selected, the 3D Map and 2D Map screens will automatically zoom in or out, depending on your speed, to allow optimal viewing of your route. display North at the top of the 2D Map screen select the Keep North at top of 2D Map screen check box.
F10 Select Map 3/3 Complete the following: If you want to... Then... use maps from a different continent select a different continent from the maps you are currently using. When selected, the maps for the new continent will load and the 3D Map screen will display. Your preferences are automatically saved.
F10 Map POIs Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the map screens, or only display the icons from selected categories. For example, you may only be interested in entertainment venues and want to disable other categories such as schools. Complete the following: If you want to... Then... display all POI icons (ie, icons from all categories) Tap Turn All On. display no POI icons Tap Turn All Off.
F10 Volume Complete the following: If you want to... Then... increase or decrease the volume move the Volume slider towards High to increase the volume. hear a tone when you tap the touch screen select the Audio check box. hear keyboard characters spoken to you select the Speak keyboard letters check box. move the Volume slider towards Low to decrease the volume. Your preferences are automatically saved.
F10 Screen Complete the following: If you want to... change the screen brightness Then... move the Screen Brightness slider towards Bright to increase screen brightness. move the Screen Brightness slider towards Dim to decrease screen brightness. Warning: Your Navman can heat up when the Brightness scale is set above 70% - i.e., when more than seven rectangles are coloured - therefore, use lower brightness whenever acceptable. 52 Your preferences are automatically saved.
F10 POI Alerts The Alert preferences allow you to set warning chimes and visual warnings for custom POI that will notify you when you are within a chosen distance-radius of your location. For example, a warning chime will sound or a visual warning will display when a place in an active category is nearby (set by the Warning Distance preferences), but not necessarily on your route. Note: Custom POI categories must first be installed on your Navman using NavDesk before they can be set as active. 3. 4.
F10 GPS GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The GPS Status screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with ground speed, the heading in degrees and a north-pointing compass. The strength of each satellite is displayed on a bar chart.
F10 Setting your GPS mode Complete the following: If you want to... Then... use GPS select the Normal option. use WAAS select the WAAS (only available in USA) option. use EGNOS select the EGNOS (only available in Europe) option. Note: WAAS - Wide Area Augmentation System is a navigation system developed for civil aviation by the Federal Aviation Administration (FAA), a division of the United States Department of Transportation (DOT).
F10 Language Complete the following: If you want to... Then... enable voice guidance select the Enable voice guidance check box. change the on-screen language select your preferred language from the Language box and tap OK. change the voice scheme select your preferred voice scheme from the Voice Guidance box. Your language preference is saved and the map screen is displayed. Note: Only voice schemes that are compatible with the chosen language are displayed.
F10 Power The Battery Status bar shows the percentage of power left in the Navman battery; the words External Power will display when the battery is charging from an external power source. To charge the battery, see "Internal battery" on page 10. Complete the following: If you want to... Then... change the time to elapse before turning off, when using battery power tap the on battery power box and select a time to elapse before turning off; select Never for the Navman to never automatically turn off.
F10 Keyboard Complete the following: If you want to... Then... use an alphabetic keyboard for entering information select the Use alphabetic type (a, b, c...) option. use a QWERTY keyboard for entering information select the Use QWERTY type option. use a keypad-type keyboard (predictive text) when searching for an address select the Use keypad type (abc, def...) for address searches check box. Your preferences are automatically saved.
F10 Units You can change the units used by your Navman by customizing the measurements preferences. Units 1/2 Complete the following: 1 If you want to... Then... change the time format select either the 12 hour or 24 hour option change the distance units1 select your preferred distance unit type from the Distance Units options. Your preferences are automatically saved. Only available when AU English, UK English or US English language is selected.
F10 Units 2/2 Complete the following: If you want to ... Then ... change the latitude, longitude position format select either the Decimal degrees or the Degrees, minutes and seconds option. 60 Your preferences are automatically saved.
F10 Start-up Complete the following: If you want to... Then... show the Tutorial when you turn on your Navman select the Show the Tutorial checkbox. show the Language Selection screen when you turn on your Navman select the Show the Language Selection screen checkbox. Your preferences are automatically saved.
F10 Saved Info Complete the following: If you want to... Then... delete recent locations tap Delete Recent Locations. delete favourites tap Delete Favourite Destinations. delete avoid areas tap Delete Avoid Areas. restore factory default settings tap Restore Factory Defaults. Note: The Restore Factory Defaults option does not delete recent locations or saved favourite destinations. clear all settings; for example, for use in a rental car 62 complete all of the above.
F10 Tutorial The Tutorial displays when you turn your Navman on, unless you have cleared the Show tutorial on start-up check box. You can view the Tutorial at any other time: To prevent the Tutorial from displaying again on startup, clear the Show on start-up check box to clear it. To move forward through the Tutorial screens, tap To revisit the previous screen, tap . .
F10 About This preference contains copyright and trademark information. Shop Demo Complete the following: If you want to... Then... enable a shop demonstration of SmartST to be played tap Shop Demo on the preference screen. After a 10 second delay, the route demonstration will navigate between your first and second favourite.
F10 What is NavDesk? NavDesk and Map DVDs are sold separately NavDesk is a suite of tools you can use to access greater functionality and product information via your computer. NavDesk (sold separately) allows you to: obtain software updates manage maps manage custom POIs manage safety camera subscriptions report trip mileage transfer pictures from your Navman using NavAlbum browse the Navman website for special offers.
F10 How do I install NavDesk onto my computer? Note: Before you begin: Ensure that your computer meets the minimum system requirements for NavDesk, especially: i. Ensure that Internet Explorer 6 or higher is installed on your computer before you install NavDesk, even if it is not your default browser. ii. Windows XP users, ensure that Windows XP Service Pack 2 or higher has been applied before you install NavDesk. 1. Close all programs on your computer. 2.
F10 NavDesk features Tip: After NavDesk has been installed on your computer, you can access it from the Windows Start menu: Start All Programs Navman NavDesk Element Description Menu bar Menus that provide access to basic NavDesk functionality. Navman online Displays the Navman website. My Maps Application used to install and manage maps. My Subscription Information on your current subscriptions, including safety camera subscription.
F10 How do I keep NavDesk up-to-date? We recommend that you regularly use NavDesk to check the Navman server for NavDesk software updates. Note: Updating software is different from upgrading software: When you update NavDesk, the latest service packs and bug fixes are downloaded from the Navman server and applied to your Navman. To upgrade NavDesk, you must first purchase a new version of NavDesk from a retailer, then install it on your Navman. How do I update NavDesk? 1.
F10 My Maps The My Map application allows you to install new maps, remove maps from your device and purchase new maps. Start All Programs Navman NavDesk My Maps Element Description Zoom In Click to zoom in. Continent A drop down list of continents that have maps available for your Navman. Map Source A list of maps on the DVD or available for purchase via the Navman store website. My Navman A list of maps installed on your Navman. Zoom Out Click to zoom out.
F10 How do I install maps onto my Navman? Your Navman comes with one or more pre-activated maps. You can install maps from the DVDs (sold separately) to a memory card or your Navman internal memory; however you may need to purchase a Map Product Key to activate the maps. Which map should I install? If you are not sure which map contains the town or city that you want to install, you can use the Find City window to identify the correct map.
F10 7. Your computer will connect to the Internet and activate your Map Product Key. When activation has completed, the map will change colour to amber; continue to step 7. Click the map you want to install to your Navman. The map will change colour to green to indicate it has been selected. To deselect a map, click the map again. Note: You may need to install multiple maps to cover the required geographical area. 8. Complete the following: If you want to ... 9. Then ...
F10 How do I remove maps from my Navman? 1. Click My Maps. The My Maps application will display. 2. From the My Navman panel, select the check box next to the map you want to remove. 3. Click Remove maps to remove the selected maps. 4. Confirm that you want to remove the selected map when prompted. The map is removed from your Navman. How do I know which map contains a particular city or town? Use the Find City window to find the map that contains a particular city or town. 1. Click My Maps.
F10 What is a Major Road Network map? Continuous continental navigation Major Road Network maps allow you to seamlessly navigate between installed maps without installing maps of all regions along your route. Each Major Road Network map covers a large area, such as Western Europe, and contains main roads that connect cities and towns. You can select a road or Point of Interest on the Major Road Network map as your departure point or destination.
F10 NavAlbum Depending on your Navman model, certain NavAlbum features may not be functional. NavAlbum is a NavDesk application which allows you to copy, delete or move pictures or albums between the NavPix library on your Navman and the NavPix library on your computer. You can upload them to www.navpix.net to share with other NavPix users. Start All Programs Navman NavDesk NavAlbum Element Description NavPix menu Gives access to NavAlbum functionality.
F10 Toolbar The following options are available on the toolbar: Button Description Create new album Click to create a new album in the NavPix library you are viewing. Rotate left Rotates the selected NavPix 90° to the left. Rotate right Rotates the selected NavPix 90° to the right. Transfer to your Navman or If you are viewing NavPix in the NavPix library on your computer, this will display as Transfer to your Navman. Click to transfer the selected NavPix to your Navman.
F10 How do I use NavAlbum? How can I view and edit pictures or albums on my computer? Complete one of the following: If you want to ... Then ... rotate a picture to left select the picture from the Album display area. click Rotate left on the toolbar. rotate a picture to right select the picture from the Album display area. click Rotate Right on the toolbar. view the picture details select the picture from the Album display area.
F10 If you want to ... export to Google Earth™ (only NavPix with GPS coordinates can be exported to Google Earth) search for other NavPix upload pictures to the NavPix online library Then ... in the Desktop albums section, select the album containing the picture you want to export to Google Earth. select the NavPix, right click and then select Export to Google Earth. Note: You need to install the Google Earth software on your computer to be able to view the file you have created.
F10 Image Search Image Search is a NavDesk application powered by Flickr™ allowing you to download photos and import them to NavAlbum. You can then upload the photo to either the NavPix or Flickr websites, transfer photos to your Navman, export pictures to Google Earth or search for other NavPix near the longitude and latitude of your NavPix. Start All Programs Navman NavDesk Image Search How do I download NavPix from the internet? 1.
F10 My subscriptions Safety camera information is only available for selected countries. Your Navman contains pre-loaded safety camera information. To subscribe to current Navman safety camera information, use the DVD (sold separately) to install NavDesk software on your computer. For the latest safety camera coverage, to subscribe to safety camera information and to see our latest offers, visit www.navman-stores.com. Each country has a coloured circle indicating the status of your subscription.
F10 Activate your Subscription Start All Programs Navman NavDesk 1. From Available Subscriptions section, select the country for which you want to activate the safety camera. 2. Right click and select Activate my subscription. The Activation window will display. 3. Enter the subscription product key in the Product Key field. 4. Click Continue. Follow the prompts to update your subscription. Your software will update automatically.
F10 Voice Transfer The Voice Transfer application is part of NavDesk and allows you to install or remove voice files. Voice files take up space on your Navman’s internal memory. If you do not use a voice file, you can remove it to free up space. You can later reinstall it to your Navman if required. Note: Insert the NavDesk Application Installer DVD into your computer DVD drive.
F10 PIN Security PIN Security is a feature which allows you to set a PIN on your Navman. The PIN will disable your Navman in the event of theft. To set a PIN you must first register your Navman with the Navman server. How do I register my Navman and set a PIN? Tools PIN Security The PIN registration screen will display. 1. Click Register now and follow the prompts to complete the registration form online. 2.
F10 What if I forget the PIN for my Navman? Tools PIN Security 1. In the User Name and Password fields, enter the username and password that you entered when registering online. 2. In the PIN field, enter a new PIN you want to assign to your Navman. Note: Your PIN must be between three and eight numerical digits. 3. Click OK. The PIN for your Navman has been set.
F10 How do I backup my Navman? You can save backups of the following information, and later restore them to your Navman: Favourites and My Home Preferences, including Point of Interest and NavPix preferences Multi-stop trips Recent locations. How do I Backup my Navman? Tools Backup Restore. The Backup & Restore window will open. 1. Click Create new. The Create new backup window will display. 2.
F10 Reference How do I insert a Memory Card? Hold the card by the edges and gently insert it into the slot with the label facing the front of the Navman. CAUTION Do not to apply pressure to the centre of the memory card. How do I remove a Memory Card? Before removing the memory card, turn off the Navman. Next, gently push the top edge of the card to release it, and pull it out of the slot.
F10 Point of Interest categories Icon 86 Description Icon Description Airline Access Airport Amusement Park Arts or Cultural Centre Bank Beach Boat Ramp Breakdown Service, Car Repair Facility Building Camping Ground Car Dealer Caravan Park, Trailer Park Cash Dispenser Casino Centre of Settlement Church Cinema City Centre College or University Company Concert Hall, Music Centre, Opera Convention Centre, Exhibition Centre Courthouse Cultural Centre Dentist Doctor Drive-Through
F10 Icon Description Icon Description Railway Station Rent-a car Parking Rest Area Restaurant Area Scenic or Panoramic View School Shop Shopping Centre Stadium Swimming Pool Tennis Court Theatre Tourist Information Office Travel Agency Vehicle Equipment Provider Veterinarian Water Sports Winery Yacht Basin Zoological park (zoo) Branded Points of Interest Branded Points of Interest are available on some maps.
F10 © 2007 MiTAC International Corporation. Navman is a registered trademark of MiTAC International Corporation and is used under licence by Navman Technology NZ Ltd. All rights reserved. The software contains proprietary information of Navman; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.
F10 For more information User Manual The User Manual can be downloaded from the Navman website: www.navman.com/manuals Online support For 24/7 help and support with Navman products, visit our Technical Support website at: support.navman.com You will find a fully searchable Frequently Asked Questions (FAQs) section for all Navman products. At least 90% of our customers find answers to their questions at support.navman.
DOC-27-B
