iCN 500 series with Smart 2005 TM User Manual iCN 510 iCN 520 English - United States / Canada
iCN 500 Series | User Manual Contents Box Contents ............................................................................ 5 1. Introduction ........................................................................... 7 2. iCN Features ........................................................................ 8 3. Positioning the iCN in a Vehicle........................................... 12 4. Memory Card. ..................................................................... 14 5. Starting Your iCN ....
iCN 500 Series | User Manual 4
iCN 500 Series | User Manual This user manual will help you Drive-Away™ with your iCN, straight out of the box. Navman welcomes your feedback. To contact us or visit our website, see Support Information on page 87. Box Contents Purchasers of Smart 2005 software-only upgrade kits, see the enclosed Upgrade Guide for your Box Contents. USB Cable Protective Carry-Case AC Power-Pack with Power-Cable Note: The number of plugs depends on the country of purchase.
Getting started iCN 500 Series | User Manual 6
iCN 500 Series | User Manual Whether you travel in your own country or elsewhere, the iCN will direct you to your destination without the need for map-books and second-hand instructions. The Global Positioning System (GPS) is available free of charge, at any time, and is accurate to within 5 m (15 ft). Your iCN map provides street-level detail for door-to-door navigation, including Points of Interest (POIs) such as accommodation, petrol stations, railway stations and airports.
Getting started iCN 500 Series | User Manual 2. iCN Features We recommend that you familiarize yourself with the iCN’s basic operations, such as using the stylus, 4-way toggle and Volume control. Front Components Component Charge Indicator Description Amber indicates that battery is charging; Green indicates that battery is fully charged. Displays maps and menu options.
iCN 500 Series | User Manual Description 4-Way Toggle Selects Main Menu options, keyboard characters and Preferences, moves around the 2D Map screen to select a destination, and scrolls through lists, such as lists of search results; press center to confirm the selected menu option, text or preference; press up or down to adjust the viewing angle on the 3D Map screen. Speaker Outputs voice commands and warnings. Use the Volume control to adjust.
Getting started iCN 500 Series | User Manual Side Components Component Description SD/MMC Slot Slot for memory card. Memory card must be inserted with label facing forward. Stylus Used to tap the screen to make selections and enter information; Pull out of the slot to use and insert in the slot to store. Volume Control Rotate up or down to hear a sound test; rotate and hold to adjust volume. Headphone Socket Connection socket for headphones or earphones (not included).
iCN 500 Series | User Manual The stylus is your input device. Pull the stylus out of the slot and extend it for ease of use. Store it in the slot when not in use. • Tap the screen with the stylus to select. • Tap and drag the screen with the stylus to navigate the Map and 3D Map screens. Internal Battery The iCN has an internal battery that when fully charged should power the iCN for 4 hours.
Getting started iCN 500 Series | User Manual 3. Positioning the iCN in a Vehicle Before you begin, check if your vehicle is fitted with a heat-reflective or heated windshield. If so, you will need to purchase an external antenna for your iCN to receive GPS signals. See page 76. Follow the safety notice on page 7 to ensure that the iCN does not obstruct the driver’s view, or interfere with the operation of vehicle airbags and safety devices.
iCN 500 Series | User Manual a. Position the two locating-tabs on the underside of the iCN into the corresponding slots on the socket-clip. b. Snap the upper side of the iCN into the socket-clip. 6. Use the alcohol swab to clean and dry the suction-cup and the mounting-area on the windshield, then attach the suction-mount to the windshield: a. Hold the suction-cup firmly against the windshield and b. Press the lever towards the suction-cup. 7. Connect the iCN to the vehicle power supply: a.
Getting started iCN 500 Series | User Manual 4. Memory Card To navigate to your destination you will first need to insert the memory card in to your iCN. Canadian Users: Your iCN came with a memory card containing a preactivated map of Canada and Alaska, and a Basemap of the continental United States (for more information on Basemaps, see page 71).
iCN 500 Series | User Manual The Main Menu screen provides access to all of the iCN’s functions, including navigating to a destination. Step One: Turn iCN On 1. Check the Battery Switch on the back of the iCN. If it is switched to OFF, then remove the stylus and use it to switch the Battery Switch to ON. 2. Gently pull the bottom of the GPS receiver away from the iCN. The receiver will lift out to a horizontal position to allow it to obtain a GPS fix. . 3. Press The iCN will turn on.
Getting started iCN 500 Series | User Manual Main Menu Screen • Use the stylus to select a Main Menu option. • Return to the Main Menu screen at any time by pressing . • The Route Information option is only available when a route has been calculated. See page 39-40 for more information. ToTurn iCN Off When your iCN is off, it enters a suspended state and the system stops operating. When you turn your iCN on, it returns to the screen you were last viewing. 1.
iCN 500 Series | User Manual Normally you do not need to reset your iCN; however, should your iCN not turn on or not respond, you can reset it to solve the problem. To reset your iCN, either: a. Press and hold . The message Reset Device? will display. Tap Yes. b. Use the stylus to press the Reset button on the top of the iCN.
Getting started iCN 500 Series | User Manual 6. GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. You can view your GPS status at any time from the 2D Map, 3D Map, Next Turn and Next 4 Turns screens. The GPS Strength Indicator will display green when there is a valid fix (2D or 3D), and between one and three bars will display to indicate the strength of the signal; the GPS Strength Indicator will display red when no fix is available.
iCN 500 Series | User Manual For your safety, enter destination information before you start a journey. Do not operate the iCN while driving. Select a destination using the Destination, Keyboard and Preview screens, which used together form a destination wizard. This section describes how to use each of these screens and provides two case studies to help guide you through setting your destination.
Getting started iCN 500 Series | User Manual Figure 3. Number/Symbol Keyboard As you select each character, the first two results will display. Tap to see more search results. • To select a character or a search result, tap the character or search result. • To delete a character, press ESC or tap <<; hold ESC to delete the line. • To display the number/symbol Keyboard screen (Figure 3), tap 123. • To display the alternate Keyboard screen (Figure 2), press +, or tap Alt.
iCN 500 Series | User Manual This case study will show you how to set your destination by selecting your country, then state, then town or city, then street, then house number. Step One: Open the Destination screen a. From the Main Menu, tap Go To. b. From the Go To screen, tap Address or POI. The Destination screen will display. Important Note: i.
Getting started iCN 500 Series | User Manual Step Three: Select the State of Destination If you only have the map of one state installed and selected, that state is selected for your destination by default and cannot be changed. Go to Step Four: Find the Town or City of Destination. a. Select a state from the list. The Destination screen will display. Step Four: Find the Town or City of Destination a. From the Destination screen, tap Find town/city. The Keyboard screen will display. b.
iCN 500 Series | User Manual a. From the Destination screen, tap Find street. The Keyboard screen will display. b. Use the Keyboard screen to find the street of your destination. For information on using the Keyboard screen, see pages 19-20. The Destination screen will display. Step Six: Find the House Number of Destination a. From the Destination screen, tap Enter house number. The Keyboard screen will display.
Getting started iCN 500 Series | User Manual b. Use the Keyboard screen to find the house number of your destination. For information on using the Keyboard screen, see pages 19-20. The Preview screen will display. c. Complete one of the following: • To calculate the route and open the 3D Map screen, tap Go. The 3D Map screen will display. • To display the destination on the 2D Map screen, tap the preview map. The 2D Map screen will display. • To save the destination as a Favorite, tap Save.
iCN 500 Series | User Manual This case study will show you how to set your destination by selecting a Point of Interest (POI). A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as parks and museums. Step One: Open the Destination screen a. From the Main Menu, tap Go To. b. From the Go To screen, tap Address or POI. The Destination screen will display. Important Note: i.
Getting started iCN 500 Series | User Manual Step Three: Select the State of Destination If you only have the map of one state installed and selected, that state is selected for your destination by default and cannot be changed. Go to Step Four: Select the Type of POI. a. Select a state from the list. The Destination screen will display. Step Four: Select the Type of POI Note: To narrow the search for a type of POI, you can first search by Town or City. a.
iCN 500 Series | User Manual d. Complete one of the following: • To calculate the route and open the 3D Map screen, tap Go. The 3D Map screen will display. • To display the destination on the 2D Map screen, tap the preview map. The 2D Map screen will display. • To save the destination as a Favorite, tap Save. The New Favorite screen will display. See Favorites and My Home on page 45. • To change your destination, tap ESC. The Destination screen will display.
Getting started iCN 500 Series | User Manual 8. Using the 2D Map screen to Plan a Route You can plan a route directly from the 2D Map screen using the Pop-up menu. 1. From the Main Menu, tap Map. The 2D Map screen will display. • Move around the 2D Map screen using the 4-way toggle or stylus. • To display a smaller area in greater detail, press +. • To display a larger area in less detail, press -. 2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs.
iCN 500 Series | User Manual 9. Multi-stop Trips You can use the Multi-stop Trip screen to set multiple destination points for your trip. Your route will be calculated to go via each of these points in the specified order. Destination points can be added via the Multi-stop Trip screen or by selecting Show Details from the pop-up menu on the 2D Map screen, then Add to Trip. You can save up to 200 multi-stop trips, each with up to 14 destination points.
iCN 500 Series | User Manual c. Tap Address or POI. The Destination screen will open. Note: You can also add destination points using Favorites, recent destinations and nearest Point of Interest. Step Two: Select the Country of Your Destination Point If you only have the map of one country installed and selected, that country is selected for your destination point by default and cannot be changed. Go to Step Three: Select the State of Your Destination Point. a.
iCN 500 Series | User Manual Step Three: Select the State of Your Destination Point If you only have the map of one state installed and selected, that state is selected for your destination by default and cannot be changed. Go to Step Four: Find the Town or City of Destination. a. Select a state from the list. The Destination screen will display. Step Four: Find the Town or City of Your Destination Point a. From the Destination screen, tap Find town/city. The Keyboard screen will display. b.
iCN 500 Series | User Manual Step Five: Find the Street of Your Destination Point a. From the Destination screen, tap Find street. The Keyboard screen will display. b. Use the Keyboard screen to find the street of your destination point. For information on using the Keyboard screen, see pages 19-20. The Destination screen will display.
iCN 500 Series | User Manual Step Six: Find the House Number of Your Destination Point a. From the Destination screen, tap Enter house number. The Keyboard screen will display. Note: If Enter house number option is not displayed, house numbers are not available for your selected street. Select Go to center of street to display the Preview screen. Go to step c. b. Use the Keyboard screen to find the house number of your destination point. For information on using the Keyboard screen, see pages 19-20.
iCN 500 Series | User Manual d. Complete one of the following: Note: Destination points added, updated or deleted after a multi-stop trip has commenced will not affect the current route. If you want to ... Then ... add another destination point Note: Destination points added after a multi-stop trip has commenced will not be included in the current route. • tap Add. The Add to Trip screen will display. • tap Address. The Destination screen will display.
iCN 500 Series | User Manual Skipping a Destination Point You can modify a multi-stop trip at any time from the Multi-stop Trip screen, however if you have already commenced a trip, changes will not affect the current route: Main Menu Multi-stop Trip To skip a destination point during a multi-stop trip, complete the following: 1. Press to return to the Main Menu screen. The Main Menu screen will display. 2. Tap Route Information. The Route Information screen will display. 3. Tap Skip Next Dest.
iCN 500 Series | User Manual 10. Viewing your Route Once a route has been calculated, you can view it in several ways. Press to cycle through the screens. 2D Map Screen The 2D Map screen is always oriented North and shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. To view the 2D Map screen, either tap Map on the Main Menu screen, or when a route has been to cycle through the screens.
iCN 500 Series | User Manual 3D Map Screen The 3D Map screen displays when a route is calculated, oriented to the traveling direction with an adjustable horizon. To view the 3D Map screen when a route has been calculated, press to cycle through the screens. • To adjust the viewing angle, press the 4-way toggle up or down. • To display a smaller area in greater detail, press +. • To display a larger area in less detail, press -. • To display the Go To Pop-up summary, press the 4-way toggle.
iCN 500 Series | User Manual Next Turn Screen The Next Turn screen displays information that you need for the next turn, the direction of the turn and the distance to the turn. A route must have been calculated for this screen to be able to display. Access to this screen is controlled by the Display preferences screen. To view the Next Turn screen when a route has been calculated, press Map of the next turn The next instruction Additional information can display here.
iCN 500 Series | User Manual Route Information Screen The Route Information screen provides information about your current route and lets you skip a trip destination point or cancel a route. The screen is only available from the Main Menu when you are navigating a route: Main Menu Route Information Show Route Tap Show Route to display your entire route on the 2D Map screen. Instruction List Tap Instruction list to display the Instruction List screen.
iCN 500 Series | User Manual Summary Tap Summary to display the Route Summary screen containing your From and To addresses, Estimated Time to arrival and the Distance remaining to your destination. If you are navigating a multi-stop trip, the information displayed will relate to your next destination point. Skip Next Destination Tap Skip Next Dest. to skip the next destination point of your trip. Only available when navigating a multi-stop trip. Cancel Route Tap Cancel Route to cancel the route.
iCN 500 Series | User Manual 11. The 2D Map Screen Pop-up Menu The Pop-up menu allows you to access navigational functions from the 2D Map screen. To display the Pop-up menu complete the following: 1. From the Main Menu,tap Map. The 2D Map screen will display. • Move around the 2D Map screen using the 4-way toggle or stylus. • To display a smaller area in greater detail, press +. • To display a larger area in less detail, press -. 2.
iCN 500 Series | User Manual 12. Avoiding an Area You can calculate a route that avoids a specified area on the map. Up to ten Avoid Areas can be added. Avoid Areas are displayed as shaded areas. If no alternative route around an Avoid Area exists, you will be routed through an Avoid Area. Adding an Avoid Area 1. From the Main Menu screen, tap Map. The 2D Map screen will display. 2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs. 3.
iCN 500 Series | User Manual 13. Route Demonstrator The Route Demonstrator allows you to: • Preview a route. • Plan and view a route without a GPS fix, such as when you are inside a building. Step One: Activate Route Demonstrator 1. From the Main Menu screen, tap Preferences. 2. From the Preferences screen, tap Routing. The Routing screen will display. 3. Press twice. 4. Select the Demonstrate Route check box. 5. Tap Save. The Main Menu screen will display.
iCN 500 Series | User Manual To Disable Route Demonstrator 1. Press to display the Main Menu screen. 2. From the Main Menu screen, tap Preferences. 3. From the Preferences screen, tap Routing. The Routing screen will display. 4. Press twice. 5. Clear the Demonstrate Route check box. 6. Tap Save. Route Demonstrator will be disabled. The Main Menu screen will display.
iCN 500 Series | User Manual 14. Favorites and My Home You can save up to 200 destinations as Favorites, one of which can be saved as My Home. My Home can be any designated Favorite, but we recommend that it is your home or other common destination. You can save a Favorite from the Preview screen after searching for an address, or from the Pop-up Menu on the 2D Map screen. Saving a Favorite 1.
iCN 500 Series | User Manual 4. Complete one of the following: • To save as a favorite, tap Save as Favorite. The Favorite is saved. The Go To screen will display. • To save as My Home, tap Save as My Home. The Favorite is saved as My Home. The Go To screen will display. Saving a Favorite from the 2D Map Screen 1. From the Main Menu, select Map. The 2D Map screen will display. 2. Tap the Map screen or press the 4-way toggle button to display the cross-hairs. 3. Position the intersection of the cross-hairs.
iCN 500 Series | User Manual 6. To change the name of the Favorite, select the Name box. The Enter text screen will display. • To select a character, tap the character. • To delete a character, press ESC or tap <<; hold ESC to delete the line. • To display the number/symbol Enter text screen, tap 123. • To display the alternate Enter text screen, press +, or tap Alt. • To display the alphabet Enter text screen, press -, or tap ABC • After you have entered a name for the Favorite, tap Enter.
iCN 500 Series | User Manual 4. Tap the Name box. The Enter text screen will display. • To select a character, tap the character. • To delete a character, press ESC or tap <<; hold ESC to delete the line. • To display the number/symbol Enter text screen, tap 123. • To display the alternate Enter text screen, press +, or tap Alt. • To display the alphabet Enter text screen, press -, or tap ABC • After you have entered a name for the Favorite, tap Save. The New Favorite screen will display. 5.
iCN 500 Series | User Manual Navigating to a Favorite 1. From the Main Menu, tap Go To. 2. From the Go To screen, tap Favorites. The Favorite screen will display. 3. Select a Favorite. The Preview Favorite screen will display. 4. Tap Go. The route is calculated and displayed on the 3D Map screen. Navigating to My Home 1. From the Main Menu, tap Go To. 2. From the Go To screen, tap My Home. The route is calculated and displayed on the 3D Map screen.
iCN 500 Series | User Manual 15. Preferences You can modify the following preferences to suit your needs. Screen Brightness 1. Press and hold either the + or - button to display the Brightness scale. 2. To increase screen brightness, press +; To decrease screen brightness, press -. The Brightness scale comprises ten rectangular boxes in a row. As screen brightness is increased, the first seven boxes progressively turn from gray to green; the last three turn red.
iCN 500 Series | User Manual If you want to... Then... change the Preference for freeways move the Preference for freeways slider towards Less often to use roads other than freeways where possible when calculating a route. move the slider towards More often to use freeways where possible when calculating a route. change the Preference for urban roads move the Preference for urban roads slider towards Less often to use roads other than urban roads where possible when calculating a route.
iCN 500 Series | User Manual If you want to... Then... enable Track Recording (only to be used if required by Navman Customer Support) contact Navman Customer Support, as we recommend this feature be used only under the supervision of a Navman technician. 4. Tap Save. The Main Menu screen will display. Language Preferences 1. From the Main Menu, tap Preferences. 2. From the Preferences screen, tap Language. The Language screen will display. 3.
iCN 500 Series | User Manual Map Preferences — Display Settings 1. From the Main Menu, tap Preferences. 2. From the Preferences screen, tap Maps. 3. From the Maps screen, tap Display. The first of two Display screens will display. Press Figure 1: iCN 510 to move through the Display screens. Figure 2: iCN 520 4. Complete the following: If you want to... Then... enable Auto Zoom during navigation select the Auto Zoom check box.
iCN 500 Series | User Manual If you want to... Then... display grid lines on the 2D Map and 3D Map screens select the Display Map Grid check box. display a north-pointing compass on the 2D Map and 3D Map screens select the Display Compass on Map check box. display “no entry” icons on “no entry” roads on the 2D Map and 3D Map screens select the Display no entry roads check box. 5. Tap Save. The Main Menu screen will display. Map Preferences — Memory Card 1. From the Main Menu, tap Preferences. 2.
iCN 500 Series | User Manual Map Preferences — Points of Interest (POIs) Points of Interest in a region are grouped into types. This function allows you to select the types you need. For example, you may be only interested in entertainment venues and want to disable other POI types such as schools. 1. From the Main Menu, tap Preferences. 2. From the Preferences screen, tap Maps. 3. From the Maps screen, tap Points of Interest. The Points of Interest screen will display. 4.
iCN 500 Series | User Manual Alerts Preferences — Active POIs The Active POI settings allow you to set warning chimes and visual warnings for custom POIs that will activate within a chosen distance-radius of your location. For example, a warning chime will sound or a visual warning will display when an active POI is within 150 ft of, but not necessarily on, your route. Note: Custom POIs must first be installed on your iCN using Smart Desktop before they can be set as active POIs.
iCN 500 Series | User Manual Alerts Preferences - Speed and GPS Signals The Safety settings allow you to set safety-related warnings. 1. From the Preferences menu, tap Safety Alerts. The Safety Alerts screen will display. 2. On the Safety Alerts screen, tap Safety. The Safety screen will display. 3. Complete the following: If you want to... Then...
iCN 500 Series | User Manual My Data Preferences - My Points of Interest (My POI) Custom Points of Interest (POIs) are installed from the Smart Desktop POI Editor (see pages 74-76), and listed on the My POIs screen. 1. From the Main Menu, tap Preferences.. 2. From the Preferences screen, tap My Data. 3. From the My Data screen, tap My POI. The My POI screen will display. 4. To select a POI file, select the POI check box.
iCN 500 Series | User Manual GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The Satellite Signal Strengths screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with a north-pointing compass, the heading in degrees and ground speed. The strength of each satellite is displayed on a bar chart. From the Main Menu screen, select Preferences More Preferences GPS status.
iCN 500 Series | User Manual Measurement Preferences 1. From the Main Menu screen, tap Preferences. The Preferences screen will display. 2. From the Preferences screen, tap More Preferences. The second Preferences screen will display. 3. On the second Preferences screen, select Measurements. The Measurements screen will display. 4. Complete the following: If you want to... Then... change the Position format select either the Decimal degrees or the Degrees, minutes, seconds option.
iCN 500 Series | User Manual 5. Complete the following: If you want to... Then... align the touch screen tap Align and follow the prompts. Note: The prompts are available in English only. adjust screen brightness move the Brightness slider towards High to increase screen brightness. move the Brightness slider towards Low to decrease screen brightness. 6. Tap Save. The Main Menu screen will display. Hardware Preferences - Volume 1. From the Main Menu screen, tap Preferences.
iCN 500 Series | User Manual 3. On the second Preferences screen, tap Hardware. The Hardware screen will display 4. From the Hardware screen, tap Power Status. The Power Status screen will display. 5. Press to return to the Main Menu screen. Hardware Preferences - Power Options 1. From the Main Menu screen, tap Preferences. The Preferences screen will display. 2. From the Preferences screen, tap More Preferences. The second Preferences screen will display. 3.
iCN 500 Series | User Manual If you want to... Then... change the time to elapse before entering suspended state, when using battery power select the Go to Power Saving Mode if not used for check box under Internal Backup Battery. select the time to elapse when connected to an external power source before entering suspended state by tapping the left or right arrows or using the left and right sides of the 4-way toggle. 6. Tap Save. The Main Menu screen will display. Startup Preferences 1.
iCN 500 Series | User Manual 16. Smart Desktop Smart Desktop is used to manage maps to and from your iCN, obtain software updates, manage Custom Points of Interest (POIs) and install Basemaps. Note: For Windows® XP, ensure that Windows XP Service Pack 1 has been applied before you install Smart Desktop. Microsoft® ActiveSync® Microsoft ActiveSync is used to establish a connection between your iCN and your computer. ActiveSync 3.7.
iCN 500 Series | User Manual 5. If prompted to connect your iCN to your computer, complete the following: • Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into the USB Socket on the bottom of your iCN. • Plug the small end of the AC Power Pack cable into the Power Socket on the bottom of your iCN; plug the other end into the mains. . • Press The iCN will turn on. • When the following screen displays on your iCN, click Next.
iCN 500 Series | User Manual 17. Updating your iCN Updating your Version of Smart We recommended that you regularly use Smart Desktop to check the Navman website for Smart software updates: 1. If you connect to the Internet via a dial-up connection, connect to the Internet now. 2. Open Smart Desktop: Start Programs Navman Smart Desktop 2005 for iCN500 series 3. On the Setup menu, select Update software, then Check for updates on the web.
iCN 500 Series | User Manual 18. Installing Maps Using Smart Desktop Your iCN comes with a preactivated map. If you require additional maps, you must first purchase a Map Product Key. Use Smart Desktop to activate your Map Product Key and install the required map. Install Maps on your iCN 1. Open Smart Desktop, if it is not already open: Start Programs Navman Smart Desktop 2005 for iCN500 series 2. The available maps will display (the default colour for available maps is cross-hatch blue).
iCN 500 Series | User Manual Remove Maps from your iCN 1. Open Smart Desktop: Start Programs Navman Smart Desktop 2005 for iCN500 series 2. Open the Maps on iCN section: iCN tab Maps on iCN. 3. Click the map to be removed and select Remove from iCN from the pop-up menu.
iCN 500 Series | User Manual 19. Installing a Language on Your iCN Your iCN contains English language files by default. The following procedure will replace English on your iCN with another language. Only complete this procedure if you want to install a language other than English. Prerequisites You must have these programs installed on your computer: • Smart Desktop (in the language that you require), and • Microsoft ActiveSync 3.7.1 (or higher).
iCN 500 Series | User Manual Step Two: Reinstall Smart on Your iCN 1. Ensure that your iCN is still on and connected to your computer, then open Smart Desktop: Start Programs Navman Smart Desktop 2. You will be prompted to install Smart on your iCN. Click Yes and follow the prompts on your computer and iCN. 3. You will be prompted to register your iCN. Click No, as your iCN has been preregistered. 4. On the Tools menu, select Recover registration information from Navman. 5.
iCN 500 Series | User Manual 20. Continuous Continental Navigation Basemaps allow you to seamlessly navigate between installed maps without installing maps of all regions along your route. Each Basemap covers a large area, such as Western Europe or continental United States, and contains main roads that connect cities and towns. On the Basemap, you can select a road or POI as your departure point or destination.
iCN 500 Series | User Manual Activate Basemap 1. Disconnect the USB cable from the iCN. The iCN will turn on. • If the iCN does not turn on, press . 2. From the iCN Main Menu screen, tap Preferences. 3. From the Preferences screen, tap Maps. 4. Complete one of the following: • If the Basemap is on the iCN, from the Maps screen, select Internal Memory. The Maps - Internal Memory screen will display. • If the Basemap is on the memory card, from the Maps screen, select Memory Card.
iCN 500 Series | User Manual 21. Smart Desktop Advanced Features This section details advanced features of Smart Desktop. If you have not installed Smart Desktop, see page 63. To Find a City or Town 1. From the Map menu, click Find City. The Find City window will open. 2. Type the name of the city or town in the City Name field. The list of available cities will reduce to match your search. 3. Double-click the name of the city or town.
iCN 500 Series | User Manual Map Layers To conserve space on your iCN and memory card, you can choose map layers to install. The layers you can choose from are: • Points of Interest (POIs) • Bodies of water and parks • Land contours (topography). To access the Map Layers section: Desktop tab Settings Layers. Select or clear each checkbox to indicate the layers to install for each map.
iCN 500 Series | User Manual 2. Add a POI to the POI File. • On the POI Editor window Edit menu, click New. The POI Details window will open. • Type a description for the POI in the Description box. • On the Degrees, Minutes, Seconds tab, type or select the degree, minute and second of the POI latitude in the Latitude boxes. • On the Degrees, Minutes, Seconds tab, type or select the degree, minute and second of the POI longitude in the Longitude boxes. • To save the POI, click OK. 3.
iCN 500 Series | User Manual 3. Modify the POI settings as required: If you want to... Then... activate the POI select the Active check box. Note: If you do not activate the POI, you will be able to configure only the POI Visibility Level and Icon File settings. enable a visual warning when the POI is in close proximity select the Visual Alert check box. enable a warning chime when the POI is in close proximity select the Audio Alert check box.
iCN 500 Series | User Manual Backups You can save backups of all iCN Preferences and Favorites to your computer. To Back up your Preferences, Favorites and My Home 1. On the Smart Desktop File menu, click Backup. The Backup window will display. 2. Click New Backup. The New Backup window will display. 3. Click OK. The New Backup window will close. The backup will be listed on the Backup window. 4. Close the Backup window. To Delete a Backup 1. On the Smart Desktop File menu, click Backup.
iCN 500 Series | User Manual 22. Accessories You can purchase separately almost all items that came with your iCN, including additional mountingkits and in-vehicle power adaptors. The following accessories are also available for your iCN: mMCX External Antenna Required for vehicles with heated or heat-reflective windshields or to boost GPS performance in weak signal-areas and in areas with poor or limited visibility of the open sky.
iCN 500 Series | User Manual Appendix: Street Types Country Street Type Abbreviation Canada ABBEY ACRES ALLEE ALLEY AUTOROUTE AVENUE (English) AVENUE (French) ABBEY ACRES ALLEE ALLEY AUT AVE AV BAY BEACH BEND BOULEVARD (English) BOULEVARD (French) BY-PASS BYWAY BAT BEACH BEND BLVD BOUL BYPASS BYWAY CAMPUS CAPE CARRÉ CARREFOUR CENTER (English) CENTER (French) CERCLE CHASE CHEMIN CIRCLE CIRCUIT CLOSE COMMON CONCESSION CORNERS COTE COUR COURT COVE CRESCENT CROISSANT CROSSING CUL-DE-SAC CAMPUS CAPE CA
iCN 500 Series | User Manual Country Street Type Abbreviation Canada (continued) EXPRESSWAY EXTENSION EXPY EXTEN FARM FIELD FOREST FREEWAY FRONT FARM FIELD FOREST FWY FRONT GARDENS GATE GLADE GLEN GREEN GROUNDS GROVE GDNS GATE GLADE GLEN GREEN GRNDS GROVE HARBOUR HEIGHTS HIGHLANDS HIGHWAY HILL HOLLOW HARBR HTS HGHLDS HWY HILL HOLLOW ÎLE IMPASSE ISLAND iLE IMP ISLAND KEY KNOLL KEY KNOLL LANDING LANE LIMITS LINE LINK LOOKOUT LOOP LANDNG LN LMTS LINE LINK LKOUT LOOP MALL MANOR MAZE MEADOW MEW
iCN 500 Series | User Manual Country Street Type Abbreviation Canada (continued) PARK PARKWAY PASSAGE PATH PATHWAY PINES PLACE (English) PLACE (French) PLATEAU PLAZA POINT PORT PRIVATE PROMENADE PK PKY PASS PATH PTWAY PINES PL PLACE PLAT PLAZA PT PORT PVT PROM QUAY QUAY RANG RANGE RIDGE RISE ROAD ROND POINT ROUTE ROW RUE RUELLE RUN RANG RG RIDGE RISE RD RDPT RTE ROW RUE RLE RUN SENTIER SQUARE STREET SUBDIVISION SENT SQ ST - ‘ SUBDIV TERRACE TERASSE THICKET TOWERS TOWNLINE TRAIL TURNABOUT TERR T
iCN 500 Series | User Manual Country Street Type Abbreviation United States of America ALLEY ANNEX ARCADE AVENUE ALY ANX ARC AVE BAYOO BEACH BEND BLUFF BLUFFS BOTTOM BOULEVARD BRANCH BRIDGE BROOK BROOKS BURG BURGS BYPASS BYU BCH BND BLF BLFS BTM BLVD BR BRG BRK BRKS BG BGS BYP CAMP CANYON CAPE CAUSEWAY CENTER CENTERS CIRCLE CIRCLES CLIFF CLIFFS CLUB COMMON CORNER CORNERS COURSE COURT COURTS COVE COVES CREEK CRESCENT CREST CROSSING CROSSROAD CURVE CP CYN CPE CSWY CTR CTRS CIR CIRS CLF CLFS CLB CMN C
iCN 500 Series | User Manual Country Street Type Abbreviation United States of America (continued) ESTATE ESTATES EXPRESSWAY EXTENSION EXTENSIONS EST ESTS EXPY EXT EXTS FALLS FERRY FIELD FIELDS FLATS FORD FORDS FOREST FORGE FORGES FORK FORKS FORT FREEWAY FLS FRY FLD FLDS FLTS FRD FRDS FRST FRG FRGS FRK FRKS FT FWY GARDEN GARDENS GATEWAY GLEN GLENS GREEN GREENS GROVE GROVES GDN GDNS GTWY GLN GLNS GRN GRNS GRV GRVS HARBOR HARBORS HAVEN HEIGHTS HIGHWAY HILL HILLS HOLLOW HOUSE HBR HBRS HVN HTS HWY HL
iCN 500 Series | User Manual Country Street Type Abbreviation United States of America (continued) LAKE LAKES LANDING LANE LIGHT LIGHTS LOAF LOCK LOCKS LODGE LOOP LK LKS LNDG LN LGT LGTS LF LCK LCKS LDG LOOP MANOR MANORS MARKET MEADOW MEADOWS MILL MILLS MISSION Freeway MOUNT MOUNTAIN MOUNTAINS MNR MNRS MKT MDW MDWS ML MLS MSN MTWY MT MTN MTNS NECK NCK ORCHARD OVAL OVERPASS ORCH OVAL OPAS PARK PARKS PARKWAY PARKWAYS PASS PASSAGE PATH PIKE PINE PINES PLACE PLAIN PLAINS PLAZA POINT POINTS PORT PORT
iCN 500 Series | User Manual Country Street Type Abbreviation United States of America (continued) RANCH RAPID RAPIDS REST RIDGE RIDGES RIVER ROAD ROADS ROUTE ROW RUE RUN RNCH RPD RPDS RST RDG RDGS RIV RD RDS RTE ROW RUE RUN SHOAL SHOALS SHORE SHORES SKYWAY SPRING SPRINGS SPUR SPURS SQUARE SQUARES STATION STRAVENUE STREAM STREET STREETS SUMMIT SHL SHLS SHR SHRS SKWY SPG SPGS SPUR SPUR SQ SQS STA STRA STRM ST STS SMT TERRACE THROUGHWAY TRACE TRACK TRAFFICWAY TRAIL TUNNEL TURNPIKE TER TRWY TRCE TRAK
iCN 500 Series | User Manual Country Street Type Abbreviation United States of America (continued) VILLE VISTA VL VIS WALK WALKS WALL WAY WAYS WELL WELLS WALK WALK WALL WAY WAYS WL WLS 86
iCN 500 Series | User Manual Support Information Support for Australia: Support for Europe: Navman Australia Pty. Ltd PO Box 479 Gladesville NSW 2111 Australia Navman Europe Limited 4G Gatwick House Peeks Brook Lane Horley, Surrey RH6 9ST United Kingdom pcnsupport.aus@navman.com www.navman.com Support: www.navman-europe.com/support.php www.navman-europe.com Support for New Zealand: Support for US and Canada: Navman NZ Ltd PO Box.
iCN 500 Series | User Manual Notes 88
iCN 500 Series | User Manual Notes 89
iCN 500 Series | User Manual Notes 90
MN000405B
