User Manual N-Series with SmartS ™ 2006 SE en English - Australia/Canada/United States
© 2006 Brunswick New Technologies Asia Pte Limited. Navman is a registered trademark of Brunswick New Technologies Asia Pte Limited and is used under licence by Navman New Zealand. Navman is part of the Brunswick Corporation, headquarters Chicago, IL. All rights reserved. The software contains proprietary information of Navman; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.
N-Series User Manual Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
N-Series User Manual AC Adapter-specific safety information To charge your Navman from the mains power, use the AC adapter/AC power pack supplied by Navman as an accessory (may be sold separately). Using other AC adapters with your Navman could result in serious injury or property damage. Never use the adapter if the plug or cord are damaged. Do not expose the adapter to moisture or water. Do not use the adapter in a high moisture environment. Exposure to water may cause electrical sparks or fires.
N-Series User Manual Contents Important safety information...................................................................................................................3 Welcome................................................................................................................................................7 Box Contents ....................................................................................................................................8 Typographical conventions ..........
N-Series User Manual How do I save, e-mail or print photos?............................................................................................67 Via Memory Card........................................................................................................................67 Via NavAlbum.............................................................................................................................67 What else can I do? ............................................................
N-Series User Manual Welcome Thank you for purchasing your Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use, and will help you Drive-Away™ with your Navman, straight out of the box. Please read this manual carefully before using your Navman for the first time. Keep this manual available for future reference. In this section Box Contents ........................................................................................
N-Series User Manual Box Contents Item Item Navman with integrated GPS receiver In-vehicle mounting bracket 100/240V AC Mains power-pack for use in your home or office 12V DC In-vehicle power adaptor with power cable The mains power-pack is not supplied with all models. The number of plugs included depends on the country of purchase.
N-Series User Manual Typographical conventions It is important to understand the terms and typographical conventions used in this manual. Formatting The following kinds of formatting in the text identify special information: Convention Type of Information Bold Navman components or items displayed on screen, including buttons, headings, field names and options. Italics Indicates the name of a screen.
N-Series User Manual Getting to know your Navman We recommend that you familiarize yourself with the Navman's basic operations. Front components Component Battery indicator Description Indicates the level of internal battery charge: Touch screen Green - battery full Orange - battery charging. Displays maps and menu options. Tap to select menu options or enter information. Infrared receiver Receives signals from the remote control. The remote control is not supplied with all models.
N-Series User Manual Side components Component Description Connection socket for GPS MMCX External Antenna (not included). To access the socket, gently lift the rubber cover. Slot for memory card. The memory card must be inserted with the label facing the front of your Navman.
N-Series User Manual Back components Component Description Speaker Broadcasts voice commands and warnings. Use the Volume control to adjust up or down. Mirror Enables you to see what the camera lens sees. You can then take a photo of yourself against the background of your choice. The mirror is only available on models that include a camera. Camera The camera lens. The camera is not available on all models.
N-Series User Manual Top components Component Description Turns the Navman on or off; when off, the Navman enters a suspended state. Turns the camera on. Press to take a photo. The camera is not available on all models. Bottom components Component Description Hot shoe plate Connection plate for the P1 or T1 module (sold separately). Battery Switch Must be set to | (on) for normal use. Switching to o (off) turns the battery off, which saves battery power.
N-Series User Manual Remote Control The remote control may be sold separately. Component Description Press twice to cancel the current route. Increases the volume. The on-screen volume bar displays as green and increases as the button is pressed. Decreases the volume. The volume bar displays as green and decreases as the button is pressed. Turns the sound off or on. The volume bar displays as gray to indicate that the volume is muted. Navigate to My Home.
N-Series User Manual Volume The volume on your Navman can be adjusted either by the volume control on the Navman or by using the volume control buttons on the remote control (may be sold separately). Volume control To hear a sound test and adjust the volume, press the Volume buttons located on the side of the Navman up or down. To mute the volume, press on the remote control (may be sold separately).
N-Series User Manual Internal battery Your Navman has an internal battery that, when fully charged, should provide power for up to 4 hours. The battery indicator light on the front of the Navman indicates the level of internal battery charge: Green - battery full Orange - battery charging How do I monitor the battery status? You can monitor battery power status on the Power screen (see "Power" on page 116).
N-Series User Manual How do I get started? Before you begin, check if your vehicle is fitted with a heat-reflective or heated windshield. If so, you will need to purchase an external antenna for your Navman to receive GPS signals. For more information, see the GPS Frequently Asked Questions guide. To get started for the first time, complete the following steps: Step Action 1 Turn your Navman on. 2 Select your preferred language. 3 Read and accept the warning message. 4 View the Tutorial. 1.
N-Series User Manual 2. Select your preferred language From the Select Language screen, tap your preferred language. To prevent the Select Language screen from displaying on each startup, tap the Show on start-up check box. You can change your preferred language while using your Navman (see "Language" on page 117). 3. Accept the warning message a) The Warning screen will display when you have selected your preferred language. Read the Warning message.
N-Series User Manual How do I turn my Navman off? To turn your Navman off, press . Your Navman will enter a suspended state and the screen will turn off. When you turn your Navman on again, it will return to the screen you were last viewing. Power-saving suspended state To save power, your Navman will automatically enter a suspended state after a pre-determined period of time. You can change the default suspended state setting at the Power preference screen.
N-Series User Manual What are the main screens I will use? Map screens There are four map screens used to view the route to your destination: 3D Map 2D Map Next Turn Turn-by-Turn™ To display the 3D Map screen, or the map screen that you were last viewing, press cycle through the map screens. ; press again to For more information on the map screens, see "How do I view my route?" on page 44.
N-Series User Manual How do I navigate with GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location.
N-Series User Manual How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, gas stations, railway stations and airports. When you ... Then ... want to navigate to a NavPix™ photo location use the NavPix Menu to navigate to a preinstalled NavPix photo, or a NavPix photo that you have taken yourself (see "How do I navigate to a NavPix photo?" on page 23).
N-Series User Manual How do I navigate to a NavPix photo? Your Navman contains preinstalled NavPix photos that you can navigate to. Your five most recently used NavPix photos are displayed on the NavPix Menu. If you have not yet navigated to a NavPix photo, five of the preinstalled NavPix photos will display. 1. Tap the photo you want to navigate to. The NavPix Preview screen will display. 2. Tap Go. Your route is calculated; the 3D Map screen will display.
N-Series User Manual How do I navigate to a NavPix photo I have taken or downloaded? To navigate to a photo location, a GPS fix must have been available when the photo was taken. 1. From the Album screen, select and tap a photo. The Photo Details screen will display. 2. Tap Go. Your route is calculated; the 3D Map screen will display.
N-Series User Manual How do I search for an address? Select a destination using the Destination Search, Keyboard and Destination Preview screens, which used together form an address-entry wizard. This section describes how to use each of these screens and provides a case study to help guide you through setting your destination. In some countries, you can search for your destination by postcode or zip code.
N-Series User Manual 2. Select the country and state If this is the first time you are setting your destination and you have maps from only one country, but more than one state installed and selected, then the Select State screen will display instead of the Destination Search screen. The next time you perform this procedure, the Destination Search screen will open as expected.
N-Series User Manual 3. Search for the city/area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display. b) Use the Keyboard screen to search for the city or area of your destination. The Destination Search screen will display. 4. Search for the street a) From the Destination Search screen, tap Street. The Keyboard screen will display. There may be multiple matches for a particular street name.
N-Series User Manual Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. As you tap each character, the first two matching results will display. Tap to see more search results. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display. The Keyboard screen can display in three modes: alphabet, alternate and number/symbol.
N-Series User Manual b) Use the Keyboard screen to search for the street of your destination. Where there are multiple matches, select the city or area that best describes your destination. The Destination Search screen will display. If house numbers and intersection information are not available for your selected street, the Destination Preview screen will display. Go to step 5c. 5. Search for the house number a) From the Destination Search screen, tap House Number. The Keyboard screen will display.
N-Series User Manual c) Complete one of the following: Ensure that the route preferences are applicable for the route that you have specified, before you tap Go. If you want to ... Then ... calculate the route and open the 3D Map screen tap Go. Your route is calculated; the 3D Map screen will display. view the position on the map screen tap the map to display the position on the 2D Map screen.. add the destination to a multi stop trip tap Add. The Multi-stop Trip Planner screen will display.
N-Series User Manual How do I create a trip with multiple stops? You can use the Multi-stop Trip Planner screen to set multiple waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. Waypoints can be added via the Multi-stop Trip Planner screen or by selecting Location from the popup Map menu on the 2D Map or 3D Map screen, then Add to Trip. You can save up to 198 multi-stop trips, each with up to 14 waypoints.
N-Series User Manual Case Study: How do I navigate to multiple addresses? This case study will show you how to set a multi-stop trip by selecting your country, then state, then town or city, then street, then house number for each waypoint. 1. Start your multi-stop trip Multi-stop Trip Planner The Multi-stop Trip Planner screen will display. a) Tap Add. The Add to Trip Menu will display. b) Tap Address. The Destination Search screen will open.
N-Series User Manual 2. Select the country and state If this is the first time you are setting your destination and you have maps from only one country, but more than one state installed and selected, then the Select State screen will display instead of the Destination Search screen. The next time you perform this procedure, the Destination Search screen will open as expected.
N-Series User Manual 3. Search for the city/area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display. b) Use the Keyboard screen to search for the city or area of your destination. The Destination Search screen will display. 4. Search for the street a) From the Destination Search screen, tap Street. The Keyboard screen will display.
N-Series User Manual b) Use the Keyboard screen to search for the street of your destination. The Destination Search screen will display. If house numbers and intersection information are not available for your selected street, the Waypoint Preview screen will display. Go to step 5b. 5. Search for the house number a) From the Destination Search screen, tap House Number. The Keyboard screen will display.
N-Series User Manual c) Tap Add. The destination is automatically saved and the Multi-Stop-Trip Planner screen will display. d) Complete one or more of the following: If you want to ... Then ... add another waypoint Waypoints added after a multi-stop trip has commenced will not be included in the current route. calculate the route change the order of your waypoints tap Add. The Multi-stop Trip Planner screen will display. Return to step 3. tap Go.
N-Series User Manual How do I skip a waypoint during a multistop trip? You can modify a multi-stop trip at any time from the Multi-stop Trip Planner screen, however if you have already commenced a trip, changes will not affect the current route: Multi-stop Trip Planner To skip a waypoint during a multi-stop trip, complete the following: 1. Tap the map to display the cross-hairs. The Map Menu will display. 2. Tap Route, then Skip Waypoint.
N-Series User Manual How do I search for a landmark or venue? Setting a Point of Interest (POI) as your destination A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as gas stations, parks, beaches and museums. How do I find the nearest gas station? You can press to quickly find the nearest gas station. Your Navman will show you a list of the nearest gas stations based upon your current location. a) .
N-Series User Manual How do I find the nearest parking area? You can press to quickly find the nearest parking area. This case study will show you how to set your destination by locating and selecting a parking area. The Navman will show you a list of the nearest parking areas based upon your current location. a) . Press The Select a point of interest screen will display, showing a list of the nearest parking areas based upon your current location. The nearest appears at the top of the list.
N-Series User Manual How do I search for other POIs? Select a POI destination using the Destination Search, Keyboard and Destination Preview screens, which used together form a POI-entry wizard. This section describes how to use each of these screens and provides a case study to help guide you through setting your POI. In some countries, you can search for your destination by postcode or zip code.
N-Series User Manual 2. Select the country and state If this is the first time you are setting your destination and you have maps from only one country, but more than one state installed and selected, then the Select State screen will display instead of the Destination Search screen. The next time you perform this procedure, the Destination Search screen will open as expected.
N-Series User Manual 3. Select the type of Directory location To narrow the search for a POI, you can first search by Area or Postcode/ZIP code. a) From the Destination Search screen, tap Point of Interest. The Select POI Category screen will display. b) Select a POI type from the list. The Keyboard screen will display. c) Use the Keyboard screen to find the POI. The Destination Preview screen will display.
N-Series User Manual d) Complete one of the following: Ensure that the route preferences are applicable for the route that you have specified, before you tap Go. If you want to ... Then ... calculate the route and open the 3D Map screen tap Go. Your route is calculated; the 3D Map screen will display. view the position on the map screen tap the map to display the position on the 2D Map screen.. add the destination to a multi stop trip tap Add. The Multi-stop Trip Planner screen will display.
N-Series User Manual How do I view my route? Once a route has been calculated, the 3D Map screen will display. You will be directed to your destination by vocal and visual instructions. You can view your route in several ways by pressing to cycle through the map screens. 3D Map screen The 3D Map screen is oriented to your travelling direction. To view the 3D Map screen when a route has been calculated, press to cycle through the screens. Tap and drag the screen, to move across the map.
N-Series User Manual Item Information Description Displays one of the following options: Time km/h or mph (Speed) TTG (Time to Go) DTG (Distance to Go) ETA (Estimated Time of Arrival). Tap to cycle through the options. During a Multi-stop trip, Time to Go, Distance to Go and ETA will display as: Time to Waypoint, Distance to Waypoint and ETA at Waypoint. Route Your current route is highlighted. Cancel route Cancels your current route.
N-Series User Manual 2D Map screen The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. The 2D Map screen is displayed Course Up, unless the Map Display preference is set to North. To view the 2D Map screen, press to cycle through the screens. Tap and drag the screen, to move across the map. Tap the map, to view the Map Menu (see "How do I use the Map Menu?" on page 70).
N-Series User Manual Item Description Next turn arrow Your next turn is highlighted in a different color from future turns. The default color of your next turn is orange, but will depend on the color theme you are using. Cancel route Cancels your current route. Zoom To view zoom options, tap Compass and GPS Information To display a smaller area in greater detail, tap To display a larger area in less detail, tap . . Tap to cycle through the options; Status bar .
N-Series User Manual Next Turn screen The Next Turn screen displays information that you need for the next turn, the direction of the turn and the distance to the turn. A route must first have been calculated, for this screen to be available. To view the Next Turn screen when a route has been calculated, press screens. to cycle through the Item Description Next instruction The direction and name of the street to turn in to.
N-Series User Manual Item Description Current position Your current position is marked with Compass and GPS Information Tap to cycle through the options; ; if visible. Blue compass heading. Green Quadrants -Indicates a valid GPS signal is being used to fix your position. Between one and four quadrants will display indicating the signal strength. Tap and hold to display the GPS Status screen. Red Circle - Indicates no GPS signal. Tap and hold to display the GPS Status screen.
N-Series User Manual Turn-by-Turn™ screen The Turn-by-Turn screen displays the next four turns of your route, the turn direction, the street name and the distance to the turn. You can view all the turns in the list, using the up and down arrows. A route must first have been calculated for this screen to be available. To view the Turn-by-Turn screen when a route has been calculated, press the screens. to cycle through Item Description Direction of turn The direction of the turn.
N-Series User Manual How do I save Favorites and My Home? You can save up to 200 destinations as Favorites, one of which can be saved as My Home. My Home can be any designated Favorite, but we recommend that it is your home or other common destination. You can save a Favorite from the Destination Preview screen after searching for an address, or from the Maps Menu on the 3D or 2D Map screens. For more information, see "How do I use the Map Menu?" on page 70.
N-Series User Manual 3. Complete one of the following: If you want to ... Then ... save as a Favorite tap Save as Favorite. The Favorite is saved. The Favorite Preview screen will display. save as My Home tap Save as My Home. The Favorite is saved as My Home. The My Home Preview screen will display. How do I navigate to a Favorite? 1. Tap the Favorite destination you want to travel to. The Favorite Preview screen will display. 2. Tap Go. The route is calculated and displayed on the Map screen.
N-Series User Manual How do I navigate to My Home? If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to search for an address using the address-entry wizard. Option 1 - From the Go To Menu The route is calculated and displayed on the Map screen. Option 2 - From the Favorite Destinations screen 1. From the Favorite Destinations screen, select My Home. The My Home screen will display. 2. To navigate to My Home, tap Go.
N-Series User Manual How do I edit the name of a Favorite? 1. From the Favorite Destinations screen, select a Favorite to edit. The Favorite Preview screen will display. 2. Tap Edit. The Edit Name screen will display. 3. To edit the name of the Favorite, tap 4. . After you have edited the Favorite name, tap OK. The Edit Name screen will display. Complete one of the following: If you want to ... Then ... rename the Favorite tap Save. The Favorite is saved.
N-Series User Manual How do I delete a Favorite? 1. From the Favorite Destinations screen, select a Favorite to delete. The Favorite Preview screen will display. 2. Tap Delete. The Favorite is deleted. The Favorite Destinations screen will display.
N-Series User Manual How do I use the camera? ™ Your Navman has a built-in camera with NavPix technology, which allows you to take photos and save them as geographical locations on the navigation maps. This enables you to navigate directly to where the photo was taken. Photos can be stored in an Album on the Navman's hard drive or a memory card and viewed in full screen mode. You can also share your photos with other NavPix users by uploading them to www.navman.com/navpix.
N-Series User Manual How do I take a photo? Quick Steps 1. Press 2. Point the camera at the required building, landscape, object or person. 3. Press . again to take a photo. Detailed Steps The Viewfinder screen must be displayed before you can take a photo. 1. To display the Viewfinder screen, press 2. When the Viewfinder screen is open, an image of whatever the camera is focused on will display. on top of your Navman.
N-Series User Manual Viewfinder screen The Viewfinder screen allows you to take photos and access the camera preferences. on top of the Navman. To view the Viewfinder screen, press Pressing will not take a photo unless the Viewfinder screen is displayed. Element Description Captures the photo. Displays the Select an Album screen. Returns you to the last screen viewed. Displays the current lighting setting. Tap to view lighting options. Displays the brightness setting. Tap to view brightness options.
N-Series User Manual How do I customize camera preferences? The camera has lighting and brightness settings which you can customize before taking a photo. Lighting options 1. To view the Viewfinder screen, press 2. From the Viewfinder screen, tap . The range of lighting options will display. .
N-Series User Manual How do I manage my photos? Album management The photo albums store all your photos and display them as thumbnails. You can store your photos in customizable albums on the Navman internal memory or store them on your memory card. When you take a photo, it is always saved to the NavPix album on the Navman internal memory. You can then copy it to another album or a memory card. or Element Description Browse Displays the Select an Album screen.
N-Series User Manual How do I copy photos to the album on my memory card? Photos can be copied from the Albums on your Navman internal memory to your memory card and vice versa. The first time a photo is copied to your memory card, a folder will be created on the memory card called NavPix. 1. From the Album screen, tap Browse. The Select an Album screen will display. 2. Select the Album you want to view. 3. Tap and hold, then drag across the screen to select the photo(s) you want to copy.
N-Series User Manual Photo management The Photo Details screen displays information about your photo. Tap a photo to display the Photo Details screen. Element Description Time / Date and Displays the time and date the photo was taken. Displays the latitude and Location Co-ordinates longitude co-ordinates, if GPS co-ordinates are associated with the photo. Photo A thumbnail of the photo. Tap to display the photo in full-screen.
N-Series User Manual How do I view a photo in full-screen? 1. From the Photo Details screen, tap the thumbnail of the photo. The photo will appear in full-screen. 2. Complete the following: If you want to ... Then ... zoom into the photo tap . zoom out of the photo tap . rotate the photo tap . The photo will rotate 90 degrees counterclockwise each time is tapped; the photo is saved at the new angle.
N-Series User Manual How do I navigate to a NavPix photo? Your Navman contains preinstalled NavPix photos that you can navigate to. Your five most recently used NavPix photos are displayed on the NavPix Menu. If you have not yet navigated to a NavPix photo, five of the preinstalled NavPix photos will display. 1. Tap the photo you want to navigate to. The NavPix Preview screen will display. 2. Tap Go. Your route is calculated; the 3D Map screen will display.
N-Series User Manual How do I navigate to a NavPix photo I have taken or downloaded? To navigate to a photo location, a GPS fix must have been available when the photo was taken. 1. From the Album screen, select and tap a photo. The Photo Details screen will display. 2. Tap Go. Your route is calculated; the 3D Map screen will display.
N-Series User Manual How do I assign a photo to a Favorite? When a photo is assigned to an existing Favorite, only the image, and not the image co-ordinates, are associated with the Favorite. 1. From the Album screen, select and tap a photo. The Photo Details screen will display. 2. From the Photo Details screen, tap Assign. The Assign Photo screen will display. 3. Complete the following: If you want to ... Then ...
N-Series User Manual How do I save, e-mail or print photos? To save, e-mail or print photos, you must first transfer the photos to your computer; there are two ways to do this: Copy the photos from a memory card to your computer via a memory card reader or memory card drive, or Copy the photos from your Navman to your computer via NavAlbum software on your computer. Via Memory Card Photos can be copied from the albums on your Navman internal memory to the My Pictures folder on your memory card.
N-Series User Manual What else can I do? When you want to... Then ... view your recent locations use the Recent Locations screen (see "How do I navigate to a recent location?" on page 69). access navigation features on the 3D Map and 2D Map screens use the Map Menu (see "How do I use the Map Menu?" on page 70). calculate a route that avoids a specified area on the map use an Avoid Area (see "How do I avoid an area?" on page 72).
N-Series User Manual How do I navigate to a recent location? To make navigating to an address easier, your Navman will automatically save all your start locations and destinations in a list of recent locations. 1. Tap a recent location. The Recent Location Preview screen will display. 2. Complete one of the following: If you want to ... Then ... calculate the route and open the 3D Map screen tap Go. The 3D Map screen will display. view the full address details of the recent location tap More.
N-Series User Manual How do I use the Map Menu? The Map Menu allows you to access navigational functions from the 3D Map and 2D Map screen. Displaying the Map Menu 1. Tap 2. Tap and drag to move around the map to your selected location. 3. Tap the map. The Map Menu will display. to display the 3D Map or 2D Map screen.
N-Series User Manual Menu Option Description Route Only available when navigating a route. Displays the Route sub-menu from which you can: Detour. Detours your route to avoid the next 1, 2, 5, 10 or 20 kilometers or the next 1, 2, 5, 10 or 20 miles. Demonstrate. Starts the route demonstration, demonstrating navigation from your current position or departure point. Stop Demonstration. Stops the route demonstration. Skip Waypoint. Skips the next stop on your multi-stop trip.
N-Series User Manual How do I avoid an area? Your Navman can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded areas. CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail. CAUTION If your destination is in an Avoid Area, you will be routed into that Avoid Area. How do I add an Avoid Area? 1. Tap the map to display the Map Menu. 2. Select Add Avoid Area. 3.
N-Series User Manual How do I preview a route? Route demonstration allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview one route. To always preview your route, see "Demonstration and Logging 4/4" on page 111. 1. Select a departure point If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start elsewhere.
N-Series User Manual 3. Demonstrate the route Once the route has been determined, you can demonstrate the route by completing the following: a) Tap the map screen to display the Map Menu. b) Tap Route. The Route submenu will display. c) Tap Demonstrate. The 3D Map screen will display the calculated route in Route Demonstration mode. If you have selected the Loop demonstrations check box on the Demonstration and Logging preferences screen, the Route Demonstration will continue to repeat the route.
N-Series User Manual How do I view my route statistics? The Navman provides information on your: distance travelled average speed maximum speed time taken for trip stationary time. Trip information is presented in two different ways. These are: information for the current trip information for all trips to date, or since the tripmeter was last reset.
N-Series User Manual How do I view statistics of my trips to date? The Tripmeter - Global screen is used to view statistical information for all of your trips to date, or since the trip meter was last reset. a) From the Tripmeter - Current Route screen, tap The Tripmeter - Global screen will display. b) Complete one of the following: . If you want to ... Then ... view statistics for your current route tap reset the tripmeter to display the Tripmeter - Current Route screen. tap Reset.
N-Series User Manual What is SmartST Desktop? Smart Desktop is software for your computer and is used to install maps to your Navman. You can also use it to: remove maps from your Navman obtain software updates manage Custom Points of Interest manage subscriptions to safety camera information. ® Microsoft ActiveSync and Microsoft .NET 2.0 will be installed on your computer as part of the installation of Smart Desktop. In this section How do I install Smart Desktop onto my computer? .....
N-Series User Manual Can I use Smart computer? Desktop with my Ensure your computer has the following minimum system requirements before installing Smart Desktop: IBM compatible PC, Microsoft Windows 2000 SP4 or XP SP2 (NT not supported), Internet Explorer 6 or higher, CD drive, USB port, Internet connection for registration. ® ® You must install Smart Desktop from the Application Installer CD onto your computer hard drive; you cannot run Smart Desktop from the CD.
N-Series User Manual How do I install Smart onto my computer? Desktop Before you begin: Ensure that your computer meets the minimum system requirements for Smart Desktop, especially: i. Ensure that Internet Explorer 6 or higher is installed on your computer before you install Smart it is not your default browser. Desktop, even if ii. Windows XP users, ensure that Windows XP Service Pack 2 or higher has been applied before you install Smart Desktop. 1. Close all open programs on your computer. 2.
N-Series User Manual Press . Your Navman will turn on. When the following screen displays on your Navman, click Next: Microsoft ActiveSync will synchronize with your Navman. You are now ready to use Smart Desktop to install maps to your Navman.
N-Series User Manual Smart After Smart Desktop features Desktop has been installed on your computer, you can access it from the Windows Start menu: Start > All Programs > Navman > SmartST Desktop 2006 SE Element Description Menu bar Menus that provide access to Smart Desktop functionality, including the ability to enter subscription information. Toolbars There are three toolbars: Status Globe Cursor To display toolbars that are not on by default, select Toolbars on the View menu.
N-Series User Manual Element Description Map Information The following information will display when you point to a map: Map name File size (if the map is on the inserted CD or a CD in the same set) Map status Latitude Longitude co-ordinates in degrees, minutes and seconds Local time offset UTC To display the Latitude and Longitude co-ordinates and UTC offset, click Map Color Key . A key for defining the different colors of the maps.
N-Series User Manual Toolbars The following toolbars are available in Smart Toolbar Button Status Desktop: Description Indicates that your Navman is connected to your computer via ActiveSync. Indicates that your Navman is not connected to your computer. Globe Click to zoom in to the globe. Click to zoom out of the globe. Controls whether the globe automatically rotates to the correct maps when a map CD is inserted in your CD drive. Controls whether the globe is transparent.
N-Series User Manual How do I keep Smart date? We recommend that you regularly use Smart software updates. up-to- Desktop to check the Navman server for Smart Updating vs. Upgrading Updating software is different from upgrading software: When you update Smart Navman. To upgrade Smart , the latest service packs and bug fixes are downloaded from Navman and applied to your , you must first purchase a new version of Smart How do I update Smart from a retailer, then install it on your Navman. ? 1.
N-Series User Manual How do I install maps onto my Navman? Your Navman comes with one or more pre-activated maps. You can install maps from the enclosed CDs to memory card or your Navman internal hard drive; however you may need to purchase a Map Product Key to activate the maps. Which map should I install? If you are not sure which map contains the town or city that you want to install, you can use the Find City window to identify the correct map.
N-Series User Manual 5. 6. Follow the prompts to activate your Map Product Key, including: Enter the Map Product Key when prompted. Your computer will connect to the Internet and activate your Map Product Key. When activation has completed, the map will change color to light green; continue to step 6. Click the map you want to install to your Navman. The map will change color to dark green to indicate it has been selected.
N-Series User Manual 9. Click Install Maps. When they have been installed, the map or maps will change color to yellow. 10. To use your Navman, disconnect the USB cable. WARNING Do not disconnect the USB cable from the Navman USB Socket until the Globe has refreshed, and the installed map or maps have changed color to yellow. How do I remove maps from my Navman? 1. Open Smart Desktop, if it is not already open: Start > All Programs > Navman > SmartST Desktop 2006 SE 2. Click the View/Remove Maps tab.
N-Series User Manual How do I know which map contains a particular city or town? Use the Find City window to find the map that contains a particular city or town. 1. On the Map menu, select Find City. The Find City window will open. 2. Type the name of the city or town in the City Name field. The list of available cities will reduce to match your search. 3. Double-click the name of the city or town. The Globe will rotate to centre on the selected city or town and town location.
N-Series User Manual How do I subscribe to Safety Camera information? Your Navman contains pre-loaded Safety Camera information. Safety camera information is not available for all countries. Special Offers Special offers are automatically displayed the first time you connect to Smart Desktop. There are two offers: a free update (download) of the latest safety camera map data on subscription you can get a total of 15 months of safety camera map information for the price of 12 months.
N-Series User Manual How do I check for special offers? There are two types of special offers - an offer that requires you to purchase a subscription, and an offer which is free. The first time that you open Smart Desktop, the special offers will display automatically. How do I view and select special offers? 1. Open Smart Desktop, if it is not already open: Start > All Programs > Navman > SmartST Desktop 2006 SE 2. From the Subscriptions menu, select Check for Special Offers.
N-Series User Manual How do I install Safety Camera information? If you do not accept the free download of the latest safety camera map information, you need to complete the following steps to install safety camera information on your Navman. 1. Purchase a Subscription. 2. Activate your Subscription. Purchase a Subscription 1. To purchase a subscription to safety camera information, on the Subscriptions menu, select Purchase Subscription. The Navman Store website will open. 2.
N-Series User Manual If you ... Then ... require a product key Click Buy. The Navman Store website will open. Follow the prompts to purchase a product key. Go to step 2. How do I check for subscription updates? You can update a single safety camera subscription, or all of your current subscriptions. How do I update subscriptions? 1. Open Smart Desktop, if it is not already open: Start > All Programs > Navman > SmartST Desktop 2006 SE 2.
N-Series User Manual How do I install Custom Points of Interest? You can create custom Points of Interest by using the POI Editor in two ways: by creating your own POI files, or by using compatible POI files, such as safety camera locations, downloaded from the Internet. 1 Various POI files are available for download free or by subscription from third-party websites . Ensure that downloaded files are in .csv (Comma Separated Values) format.
N-Series User Manual How do I create a Custom Point of Interest file? Complete the following steps to create or edit a custom Point of Interest file containing the latitude and longitude of individual Points of Interest. The file will be saved on your computer in .csv (Comma Separated Values) format. When you have finished creating or editing the file, you can copy it to your Navman. For more information, see "How do I copy a Custom POI file to my Navman?" on page 95. Map 1.
N-Series User Manual c) Complete one of the following: If you know ... Then ... the degrees, minutes and seconds of the Point of Interest on the Degrees, Minutes, Seconds tab, type or select the degree, minute and second of the latitude in the Latitude boxes and the longitude in the Longitude boxes. Select N, S, E or W to designate the hemisphere of the co-ordinates.
N-Series User Manual 3. Modify the POI settings as required: If you want to ... Then ... edit the POI category name type the name of the POI category in the POI Name field. The file name cannot include spaces. The category name will consist of the first 8 characters. activate the POI to enable proximity warnings select the Active check box. If you do not activate the POI, you will not be able to configure the Alert settings.
N-Series User Manual How do I add sound files to My Sounds Admin? My Sounds Admin is used to compile a list of sound files for you to select an audible alert from when editing the Point of Interest file options. Map POI Editor 1. Click . The My Sounds Admin window will open. 2. Add, delete or play sound files as required: 3. If you want to... Then... add a sound file click to select a WAVE (.wav) sound file from your local or network drive.
N-Series User Manual How do I backup my Navman? You can save backups of the following information, and later restore them to your Navman: Favorites and My Home Preferences, including Point of Interest and photo preferences Multi-stop trips Recent locations. How do I Backup my Navman? 1. On the File menu, select Backup. The Backup/Restore window will open. 2. Click New Backup. The New Backup window will display. 3. Click OK.
N-Series User Manual What is NavAlbum? NavAlbum is software for your computer which is used to transfer NavPix photos from your Navman to your computer. You can then upload them to www.navman.com/navpix to share with other NavPix users. NavAlbum features NavAlbum enables you to copy, delete or move photos or albums between the NavPix library on your Navman and the NavPix library on your computer.
N-Series User Manual Toolbar The following options are available on the toolbar: Button Description Create new album Click to create a new album in the NavPix library you are viewing. Rotate left Rotates the selected photo 90° to the left. Rotate right Rotates the selected photo 90° to the right. Transfer to your Navman or Transfer to your computer Import photos Imports photos from your computer to the NavPix library on your computer.
N-Series User Manual How do I use NavAlbum? Before you begin: Ensure your Navman is correctly plugged into your computer: i. Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into on the side of your Navman. How do I copy photos or albums from my Navman to my computer? Photos taken with your Navman can be saved on your computer, printed, emailed to friends or shared with other NavPix users around the world. Quick steps 1.
N-Series User Manual 2. View and edit photo details as required If you want to ... Then ... view the photo and photo details select the photo and click the View details icon on the toolbar. edit GPS information select the photo and click the View details icon on the toolbar. The photo will display with the name, latitude, longitude and description details if available. You can then edit these details as required.
N-Series User Manual If you want to ... Then ... view and edit photo details view all photos in the library select the photo then click the View Details icon on the toolbar. edit the fields as required. click the View all photos button at the bottom of the Desktop album section.
N-Series User Manual How do I copy photos from my computer to my Navman? You can copy any photos from your computer to your Navman, including NavPix photos downloaded from www.navman.com/navpix. You can import any photo into NavAlbum, add or edit GPS information, and then copy the photo to your Navman. You can then navigate to where the photo was taken. Quick steps 1. Import photos. 2. Edit and place photos in albums. 3. Transfer photos from NavAlbum to your Navman. 4. Navigate to the NavPix photo.
N-Series User Manual If you want to ... Then ... include a photo in another album select the photo and drag to the required album. The photo will now be included in both albums. 3. Transfer photos from NavAlbum to your Navman a) Select the album to transfer to your Navman. b) Either click the Transfer to your Navman icon, or drag the album from the Desktop album section to the Navman album section. 4.
N-Series User Manual Reference In this section What can I customize? .......................................................................................................107 How do I insert a Memory Card? ........................................................................................130 Street types - US ................................................................................................................131 Street types - Canada.........................................................
N-Series User Manual What can I customize? There are several different customization options available to enhance your navigation experience. The Preferences menu is shown below, and is accessed by pressing the Element button on your Navman. Description Options to control aspects of your route; for example, indicating a preference for freeways. Displays the Smart Tutorial. Options to control how the Navman functions; for example, power and language controls.
N-Series User Manual Route Preferences You can enhance your navigation experience by modifying aspects of your route and route calculation. The first route preference screen is the Route Calculation screen, and is accessed by tapping the Preferences menu. Tap to display the other route preference screens. Route Calculation 1/4 Complete the following: If you want to... Then...
N-Series User Manual Road Types 2/4 Complete the following: If you want to... Then... avoid toll roads select the Toll Roads check box in the Avoid column. receive a warning if your route includes toll roads select the Toll Roads check box in the Warn column. The warning will display at the start of your trip. avoid unsealed roads select the Unsealed roads check box in the Avoid column.
N-Series User Manual Driving Alerts 3/4 Complete the following: If you want to... Then... enable a warning chime when travelling at or above a designated speed select the speed in the Alert me when my speed exceeds check box. select your preferred speed select your preferred speed from the Speed box. enable a visual warning if the Main Menu screen is accessed in a moving vehicle select the Warn me not to operate my Navman while driving check box. Your preferences are automatically saved.
N-Series User Manual Demonstration and Logging 4/4 Complete the following: If you want to... Then... enable the route demonstration select the Demonstrate routes check box. This allows you to plan and view a route without a GPS fix. enable the route demonstration to play repeatedly select the Loop demonstrations check box. enable a shop demonstration of Smart to be played select the SmartST shop demonstration check box.
N-Series User Manual Tutorial The Tutorial displays when you turn your Navman on, unless you have cleared the Show on start-up check box. You can view the Tutorial at any other time: To prevent the Tutorial from displaying again on startup, tap the Show on start-up check box to clear it. To move forward through the Tutorial screens, tap To revisit the previous screen, tap . . When you have finished the Tutorial, the Preferences menu will display.
N-Series User Manual System Preferences You can enhance your navigation experience by modifying aspects of the way your Navman functions. The System Preferences menu is shown below. To access this menu, tap menu. Element on the Preferences Description Options to control the type of keyboard used for entering an address. Displays the GPS status, with an option to reset the GPS signal.
N-Series User Manual Select Keyboard Complete the following: If you want to... Then... use an alphabetic keyboard for entering addresses select the Use alphabetic type (a, b, c...) option. use a keypad type keyboard for entering addresses select the Use keypad type (abc, def...) option. Your preferences are automatically saved. Tap to return to the previous screen.
N-Series User Manual GPS Status Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The GPS Status screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with ground speed, the heading in degrees and a northpointing compass. The strength of each satellite is displayed on a bar chart.
N-Series User Manual Power The Battery Status bar shows the percentage of power left in the Navman battery; the word External Power will display when the battery is charging from an external power source. To charge the battery, see "Internal battery" on page 16. Complete the following: If you want to... Then...
N-Series User Manual Language Complete the following: If you want to... Then... change the on-screen language select your preferred language from the Language box and tap OK. Your language preference is saved and the map screen is displayed. enable voice guidance instructions select the Enable voice guidance checkbox. while driving to your destination change the voice scheme select your preferred voice scheme from the Voice Guidance box.
N-Series User Manual Saved Information Complete the following: If you want to... Then... delete recent locations tap Delete Recent Locations. delete Favorites tap Delete Favorite Destinations. delete avoid areas tap Delete Avoid Areas. restore factory default settings tap Restore Factory Defaults. The Restore Factory Defaults option does not remove Recent locations or saved Favourite destinations. clear all settings; for example, for use in a rental car tap all buttons in turn.
N-Series User Manual Start-up Complete the following: If you want to... Then... show the Tutorial when you turn on your Navman select the Show the Tutorial checkbox. show the Language Selection screen when you turn on your Navman select the Show the Language Selection screen checkbox. Your preferences are automatically saved. Tap to return to the previous screen.
N-Series User Manual Display Preferences You can enhance your navigation experience by modifying aspects of the way your Navman displays information. The Display Preferences menu is shown below, and is accessed by tapping menu. Element on the Preferences Description Options to control the screen brightness and touch screen alignment. Options to control the general map presentation, colour scheme, and the country maps used. Options to control measurement of time, position and distance.
N-Series User Manual Screen Display Complete the following: If you want to... Then... change the screen brightness move the Screen Brightness slider towards Bright to increase screen brightness. move the Screen Brightness slider towards Dim to decrease screen brightness. Warning: The Navman can heat up when the Brightness scale is set above 70% - i.e., when more than seven rectangles are coloured therefore, use lower brightness whenever acceptable.
N-Series User Manual Map Display 1/3 Complete the following: If you want to... Then... change the color scheme select your preferred scheme from the Map Colour Scheme box. improve screen contrast in light or dark conditions select either the Day hues or the Night hues option to manually adjust the contrast. set the screen contrast to automatically adjust select the Auto hues option. Your preferences are automatically saved. Tap to return to the previous screen.
N-Series User Manual Map Display 2/3 Complete the following: If you want to... Then... enable automatic zooming during navigation select the Auto-zoom on Main Map screens check box. If selected, the 3D Map and 2D Map screens will automatically zoom in or out, depending on your speed, to allow optimal route-viewing. display North at the top of the 2D Map screen select the Keep North at top of 2D Map screen check box.
N-Series User Manual Change Continent 3/3 Complete the following: If you want to... Then... use maps from a different continent select a different continent. When selected, the maps for the new continent will load and the 3D Map screen will display. Your preferences are automatically saved. Tap to return to the previous screen.
N-Series User Manual Measurements 1/2 Complete the following: If you want to... Then... change the local time offset select either the 12 hour or 24 hour option for time-format. change the distance units2 select your preferred distance units measurement from the Distance Units options. Your preferences are automatically saved. Tap 2 to return to the previous screen. Only available when AU English, UK English or US English language is selected.
N-Series User Manual Measurements 2/2 Complete the following: If you want to ... Then ... change the Position Format select either the Decimal degrees or the Degrees, minutes and seconds option. Your preferences are automatically saved. Tap to return to the previous screen.
N-Series User Manual POI Menu You can enhance your navigation experience by modifying aspects of the way your Navman displays and manages POIs. The POI Menu is shown below. To access this menu press Element , then tap . Description Options to to set warning chimes and visual warnings for custom POI categories that will activate within a chosen distance-radius of your location. Options to control the display of POIs on your Navman. Options to search for a POI by name.
N-Series User Manual Alerts The Alert preferences allow you to set warning chimes and visual warnings for custom categories that will activate within a chosen distance-radius of your location. For example, a warning chime will sound or a visual warning will display when a place in an active category is in the vicinity (set by the Warning Distance preferences), but not necessarily on your route. Custom directory categories must first be installed on your Navman using Smart as active. 1.
N-Series User Manual How do I enable Points of Interest? Points of Interest (POIs) are grouped into categories. You may either choose to display (or hide) icons of all POI categories on the map screens, or to selectively display desired icons chosen from the list of categories. For example, you may be only interested in entertainment venues and want to disable other categories such as schools. Complete the following: If you want to... Then...
N-Series User Manual How do I insert a Memory Card? Holding the card by the edges, gently insert it into the the Navman. slot with the label facing the front of CAUTION Do not to apply pressure to the center of the memory card. How do I remove a Memory Card? Before removing the memory card, turn off the Navman. Next, gently push the top edge of the card to release it, and pull it out of the slot.
N-Series User Manual Street types - US Country Street Type Abbreviation United States of America ALLEY ANNEX ARCADE AVENUE ALLEY ANNEX ARC AVE BAYOU BEACH BEND BLUFF BLUFFS BOTTOM BOULEVARD BRANCH BRIDGE BROOK BROOKS BURG BURGS BY-PASS BYU BCH BND BLF BLFS BTM BLVD BR BRG BRK BRKS BG BGS BYP CAMP CANYON CAPE CAUSEWAY CENTER CENTERS CIRCLE CIRCLES CLIFF CLIFFS CLUB COMMON CORNER CORNERS COURSE COURT COURTS COVE COVES CREEK CRESCENT CREST CROSSING CROSSROAD CURVE CP CYN CPE CSWY CTR CTRS CIR CIRS CL
N-Series User Manual Country Street Type Abbreviation ESTATE ESTATES EXPRESSWAY EXTENSION EXTENSIONS EST ESTS EXPY EXT EXTS FALLS FERRY FIELD FIELDS FLATS FORD FORDS FOREST FORGE FORGES FORK FORKS FORT FREEWAY FLS FRY FLD FLDS FLTS FRD FRDS FRST FRG FRGS FRK FRKS FT FWY GARDEN GARDENS GATEWAY GLEN GLENS GREEN GREENS GROVE GROVES GDN GDNS GTWY GLN GLNS GRN GRNS GRV GRVS HARBOR HARBORS HAVEN HEIGHTS HIGHWAY HILL HILLS HOLLOW HOUSE HBR HBRS HVN HTS HWY HL HLS HOLW HSE ÎNLET ISLAND ISLANDS ISLE INL
N-Series User Manual Country Street Type Abbreviation LAKE LAKES LANDING LANE LIGHT LIGHTS LOAF LOCK LOCKS LODGE LOOP LK LKS LNDG LN LGT LGTS LF LCK LCKS LDG LOOP MANOR MANORS MARKET MEADOW MEADOWS MILL MILLS MISSION MOTORWAY MOUNT MOUNTAIN MOUNTAINS MNR MNRS MKT MDW MDWS ML MLS MSN MTWY MT MTN MTNS NECK NCK ORCHARD OVAL OVERPASS ORCH OVAL OPAS PARK PARKS PARKWAY PARKWAYS PASS PASSAGE PATH PIKE PINE PINES PLACE PLAIN PLAINS PLAZA POINT POINTS PORT PORTS PRAIRIE PARK PARKS PKWY PKWYS PASS PSGE P
N-Series User Manual Country Street Type Abbreviation RADIAL RAMP RANCH RIDGE RIDGES RIVER ROAD ROADS ROUTE ROW RUE RUN RADL RAMP RNCH RDG RDGS RV RD RDS RTE ROW RUE RUN SHOAL SHOALS SHORE SHORES SKYWAY SPRING SPRINGS SPUR SPURS SQUARE SQUARES STATION STRAVENUE STREAM STREET STREETS SUMMIT SHL SHLS SHR SHRS SKWY SPG SPGS SPUR SPURS SQ SQS STA STRA STRM ST STS SMT TERRACE THROUGHWAY TRACE TRACK TRAFFICWAY TRAIL TUNNEL TURNPIKE TER TRWY TRCE TRAK TRFY TRL TUNL TPKE UNDERPASS UNION UNIONS UPAS UN UN
N-Series User Manual Country Street Type Abbreviation WALK WALKS WALL WAY WAYS WELL WELLS WALK WALK WALL WAY WAYS WL WLS 135
N-Series User Manual Street types - Canada Country Street Type Abbreviation Canada ABBEY ACRES ALLEE ALLEY AUTOROUTE AVENUE (English) AVENUE (French) ABBEY ACRES ALLEE ALLEY AUT AVE AV BAY BEACH BEND BOULEVARD (English) BOULEVARD (French) BY-PASS BYWAY BAY BEACH BEND BLVD BOUL BYPASS BYWAY CAMPUS CAPE CARRÉ CARREFOUR CENTER (English) CENTER (French) CERCLE CHASE CHEMIN CIRCLE CIRCUIT CLOSE COMMON CONCESSION CORNERS COTE COUR COURT COVE CRESCENT CROISSANT CROSSING CUL-DE-SAC CAMPUS CAPE CAR CARREF
N-Series User Manual Country Street Type Abbreviation FARM FIELD FOREST FREEWAY FRONT FARM FIELD FOREST FWY FRONT GARDENS GATE GLADE GLEN GREEN GROUNDS GROVE GDNS GATE GLADE GLEN GREEN GRNDS GROVE HARBOUR HEIGHTS HIGHLANDS HIGHWAY HILL HOLLOW HARBR HTS HGHLDS HWY HILL HOLLOW ÎLE IMPASSE ISLAND iLE IMP ISLAND KEY KNOLL KEY KNOLL LANDING LANE LIMITS LINE LINK LOOKOUT LOOP LANDING LN LMTS LINE LINK LKOUT LOOP MALL MANOR MAZE MEADOW MEWS MONTEE MOOR MOUNT MOUNTAIN MALL MANOR MAZE MEADOW MEWS MO
N-Series User Manual Country Street Type Abbreviation PARADE PARC PARK PARKWAY PASSAGE PATH PATHWAY PINES PLACE (English) PLACE (French) PLATEAU PLAZA POINT PORT PRIVATE PROMENADE PARADE PARC PK PKY PASS PATH PTWAY PINES PL PLACE PLAT PLAZA PT PORT PVT PROM QUAY QUAY RANG RANGE RIDGE RISE ROAD ROND POINT ROUTE ROW RUE RUELLE RUN RANG RG RIDGE RISE RD RDPT RTE ROW RUE RLE RUN SENTIER SQUARE STREET SUBDIVISION SENT SQ ST SUBDIV TERRACE TERASSE THICKET TOWERS TOWNLINE TRAIL TURNABOUT TERR TSSE THI
N-Series User Manual Point of Interest categories Icon Description Icon Description Airline Access Airport Amusement Park Arts or Cultural Center Bank Beach Boat Ramp Breakdown Service, Car Repair Facility Building Camping Ground Car Dealer Caravan Park, Trailer Park Cash Dispenser Casino Centre of Settlement Church Cinema City Center College or University Company Concert Hall, Music Center, Opera Convention Center, Exhibition Center Courthouse Cultural Center Dentist Doctor D
N-Series User Manual Icon Description Icon Description Railway Station Rent-a car Parking Rest Area Restaurant Area Scenic or Panoramic View School Shop Shopping Centre Stadium Swimming Pool Tennis Court Theater Tourist Information Office Travel Agency Vehicle Equipment Provider Veterinarian Water Sports Winery Yacht Basin Zoological park (zoo) Point of Interest categories by subscription Icon Description Safety Cameras Safety Camera (mobile) Safety Camera (average) Red Light Camer
N-Series User Manual Specifications N20 N40i N60i Operating voltage 5V DC 5V DC 5V DC Maximum operation current 1A 1A 1A Grounding System Car battery negative Pole Car battery negative Pole Car battery negative Pole Operating voltage range 100-240V AC 101-240V AC 102-240V AC Output 5V DC, 2A 5V DC, 2A 5V DC, 2A Connection type Mini-USB Mini-USB Mini-USB Operating voltage 12V 12V 12V Operating voltage range 10-15V 10-15V 10-15V Maximum operation current 1A 1A 1A Genera
N-Series User Manual N20 N40i N60i - f/2.8 f/2.
N-Series User Manual Support information Support for Australia Support for Europe Navman Australia Pty Ltd PO Box 479 Gladesville, NSW 2111 Australia Navman Europe Ltd 4G Gatwick House Peeks Brook Lane, Horley Surrey RH6 9ST United Kingdom Support: http://support.navman.com Website: http://www.navman.com Support: http://support.navman.com Website: http://www.navman.
MN000688B-G
