Extra Information

50
How do I receive audio through my
vehicle speakers?
FM transmitting is not available on all models.
Your Navman can be set to transmit sound at a particular FM frequency which you can then receive through your
vehicle radio. This means that you can hear map voice guidance, radio, mp3 files and video voice files clearly and
loudly through your vehicle speakers.
How do I set the audio output channel of my Navman through
my car’s FM radio?
When you first access Audio output, the Internal speaker option is selected by default. If you select FM
transmitter the most recently used FM frequency will be used.
1. From the Settings screen tap Audio output.
The Audio output screen will display.
2. Select the FM transmitter option and then tap setup to set the frequency.
The Set Frequency screen will display.
When you select Audio output from Settings on your Navman the following message will be displayed “Do
you want to disconnect the Bluetooth Stereo connection.” Select Yes to output all sound through FM radio.
Select No to output the music/video sound through your Navman and all other sounds through FM radio.
3. Tap Set frequency to set a new output frequency for your Navman.
The Set frequency screen will display.
4. Tap – or + to set a frequency.
Tap and hold -/+ to decrease/increase by 1MHZ. The fine-tuning frequency unit is 0.1MHZ/per unit.
5. Tap any of the save options.
The FM screen will display with the saved frequency.
You can only save four FM frequencies on your Navman. Tap Apply directly to apply current frequency
directly. Apply directly option allows you to set the audio output channel automatically to FM (current
frequency).
6. Tap and select the frequency you want to use.
To delete a saved frequency, you must set a new frequency and replace the frequency that you no longer
require.