S-Series User Manual en English
S-Series Important safety information PLEASE READ CAREFULLY BEFORE INSTALLING PRODUCT IN VEHICLE This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death. WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. CAUTION indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
S-Series Internal battery-specific safety information The Navman contains a non-replaceable internal lithium-ion polymer battery. The battery may burst or explode if mishandled, releasing hazardous chemicals. To reduce the risk of fire or burns, do not disassemble, crush or puncture the battery. Recycle or dispose of the battery safely and properly according to local laws and regulations. Do not dispose of the battery in fire or water.
S-Series Contents Important safety information...................................................................................................................2 Welcome................................................................................................................................................7 Important information for using the manual .......................................................................................7 Getting to know your Navman ...................................
S-Series NavPix management................................................................................................................53 How do I add or edit a NavPix description?..............................................................................54 How do I navigate to a NavPix? ...................................................................................................55 How do I save a NavPix to a favourite?.............................................................................
S-Series How do I install maps from DVD? .............................................................................................100 How do I remove maps from my Navman? ...............................................................................102 How do I know which map contains a particular city or town?...................................................102 My Map Preferences.................................................................................................................
S-Series Welcome Thank you for purchasing this Navman. This manual has been prepared to guide you through the operation of your Navman from first set-up through to continuous use. Please read this manual carefully before using your Navman for the first time. Keep this manual in a safe place and use as your first point of reference. Important information for using the manual It is important to understand the terms and typographical conventions used in this manual.
S-Series Getting to know your Navman We recommend that you familiarize yourself with the Navman's basic operations.
S-Series S80 Deluxe Slot for memory card Cradle socket Power switch Socket for in-car charger, USB cable, home charger and TMC cradle (sold separately) Battery indicator Speaker Microphone 9
S-Series How do I get started? Note: The first time you use your Navman, it may take up several minutes to establish a GPS connection. For more information about GPS, refer to the GPS Frequently Asked Questions guide on the enclosed DVD. How do I turn my Navman on for the first time? To get started for the first time, complete the following steps: 1. Read the Important Safety Information on page 2. 2.
S-Series S80 Deluxe 11
S-Series 3. Turn your Navman on Slide the power switch to the ON position. Your Navman will turn on and display the Language screen. 4. Select your preferred language From the Select Language screen, tap your preferred language. 5. To prevent the Select Language screen from displaying on each start-up, clear the Show on start-up check box. You can change your preferred language while using your Navman (see "Language" on page 82).
S-Series 6. View the Tutorial When you have accepted the Safety Agreement, the first Tutorial screen will display. To prevent the Tutorial from displaying again on start-up, clear the Show on start-up check box. To move forward through the Tutorial screens, tap To view the previous screen, tap . . To view the Tutorial again while using your Navman, see "Tutorial" on page 93. Note: If you have maps installed from multiple continents, you may be prompted to select the maps you require.
S-Series How do I adjust the volume? The volume on your Navman can be adjusted by the volume control on the Volume preference screen. To mute the volume from the map screens, tap To adjust the volume, tap and hold and then tap . to display the Volume preference screen. For more information on how to adjust the volume on your Navman, see “Volume” on page 77. How do I monitor the battery status? Your Navman has an internal battery that when fully charged, should provide power for up to 3 hours.
S-Series What are the main screens I will use? Main Menu screen The Main Menu screen is your starting point for searching for a destination. The Main Menu button allows you to enter an address for your destination, customize preferences, receive updated traffic information and make and receive phone calls. The Main Menu can be accessed from the map screens by tapping bottom of any screen.
S-Series How do I navigate with GPS? The Global Positioning System (GPS) is available at any time, free of charge, and is accurate to within 5m (15ft). GPS navigation is made possible by a network of satellites that orbit the Earth at around 20,200km (12,552mi). Each satellite transmits a range of signals which are utilized by GPS receivers, such as your Navman, to determine an exact location.
S-Series How do I go from A to B? Your Navman is equipped with maps that provide street-level detail for door-to-door navigation, including Points of Interest such as accommodation, parking areas, petrol stations, railway stations and airports. When you ... Then ... know the address of your destination use the address-entry wizard to enter the address on page 18. want to make multiple stops use the Multi-stop Trip Planner screen to enter multiple waypoints on page 22.
S-Series How do I search for an address? Enter a destination using the Destination Search, Keyboard and Preview screens, which used together form an address-entry wizard. This section provides a case study to help guide you through setting your destination. Note: In some countries, you can search for your destination by postcode or zip code.
S-Series 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap The Select a map screen will display. b) Select United Kingdom from the list. The Destination Search screen will display. . 3. Search for the City/Area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display.
S-Series Using the Keyboard screen The Keyboard screen will display when you are required to enter text, such as when searching for a street name. Search results will be listed in matching order, with the closest matches appearing at the top of the list. A maximum of 99 results will display. The Keyboard screen can display with various layouts depending on the information you need to enter, including alphabet, number, alternate characters and combinations of these.
S-Series b) Use the Keyboard screen to enter Navman street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name. c) Use the Keyboard screen to enter 1 as the house number of your destination, then tap the search result. The Preview screen will display.
S-Series How do I create a trip with multiple stops? You can use the Multi-stop Trip Planner screen to set multiple stops or waypoints for your trip. Your route will be calculated to go via each of these points in the specified order. You can save up to 198 multi-stop trips, each with up to 14 waypoints. Note: Waypoints added, updated or deleted after a multi-stop trip has commenced will not affect the current route. Quick Steps 1. Start your Multi-stop trip 2. Select the country 3.
S-Series a) Tap Add. The Add to Trip Menu will display. b) Tap Address. The Destination Search screen will open. Note: You can also add waypoints using favourites, recent destinations, POI locations and NavPix. 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap The Select a map screen will display.
S-Series 4. Search for the street name and house number a) From the Destination Search screen, tap Street Address. The Keyboard screen will display. b) Use the Keyboard screen to enter Navman Street as the street name of your destination, then tap the search result. Note: There may be multiple matches for a particular street name. Long streets that run through several neighbouring areas, and common street names will produce search results ordered by their city or area name.
S-Series e) Complete one or more of the following: If you want to ... Then ... add another waypoint tap Add. The Add To Trip Menu will display. Note: Waypoints added after a multi-stop trip has commenced will not be included in the current route. return to step 1a. navigate to your selected destination . tap The Preview screen will display. tap . The 3D Map screen will display the calculated route. tap a destination point to move. The Preview screen will display. tap Up or Down.
S-Series How do I skip a waypoint during a multi-stop trip? To skip a waypoint during a multi-stop trip, complete the following: 1. Tap the map. The Map Menu will display. 2. Tap Route, then Skip Waypoint. The next waypoint will be skipped and the route recalculated to the following waypoint.
S-Series How do I search for a Point of Interest (POI)? A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are grouped by type, such as petrol stations, parks, beaches and museums. Select a POI using the Destination Search, Keyboard and Preview screens, which used together form a POI-entry wizard. Tip: You can also quickly search for certain POIs based upon your current location via the Main Menu screen.
S-Series 2. Select the country Note: If you only have the maps of one country installed and selected, that country is selected for your destination by default and cannot be changed. Go to step 3. a) From the Destination Search screen, tap The Select a map screen will display. b) Select United Kingdom from the list. The Destination Search screen will display. . 3. Search for the city/area a) From the Destination Search screen, tap City/Area. The Keyboard screen will display.
S-Series 4. Search for a POI a) Either tap Search by name to search in all POI categories, or select a category from the list. The Keyboard screen will display. b) Use the Keyboard screen to search for Waterloo Railway Station as your destination, then tap the search result. The Preview screen will display. c) Complete one of the following: If you want to ... navigate to your selected destination Then ... . tap Your route is calculated and displayed on the 3D Map screen.
S-Series How do I save Favourites and My Home? You can save up to 200 destinations as favourites, one of which can be saved as My Home. You can save a favourite from the Preview screen after searching for an address, or from the Map Menu on the 3D or 2D Map screens. For more information, see "How do I use the Map Menu?" on page 45. Can I save a NavPix to a Favourite? You can save a NavPix to any of your existing favourites. For more information, see "How do I save a NavPix to a Favourite?" on page 56.
S-Series How do I navigate to a Favourite? 1. Tap the Favourite destination you want to travel to. The Preview screen will display. 2. . Tap Your Navman will calculate the route from your current location. The 3D Map screen will display. How do I navigate to My Home? If you have not set an address as My Home, the first time you try to navigate to My Home you will be prompted to search for an address using the address-entry wizard.
S-Series How do I edit the name of a Favourite? 1. From the Favourite Destinations screen, select a favourite to edit. The Favourite Preview screen will display. 2. Tap Edit. The Edit Name screen will display. 3. To edit the name of the favourite, tap 4. After you have edited the favourite name, tap The Edit Name screen will display. 5. Complete one of the following: . . If you want to ... Then ... rename the Favourite tap Save. The favourite is saved.
S-Series How do I delete a Favourite? 1. From the Favourite Destinations screen, select a favourite to delete. The Preview screen will display. 2. Tap Delete. The favourite is deleted. The Favourite Destinations screen will display.
S-Series How do I navigate to a recent location? To make navigating to an address easier, your Navman will automatically save all your start locations and destinations in a list of recent locations. 1. Tap a recent location. The Preview screen will display. 2. Complete one of the following: If you want to ... calculate the route and open the 3D Map screen Then ... . Tap The 3D Map screen will display. view the full address details of the recent location tap More.
S-Series How do I view my route? When a route has been calculated, the 3D Map screen will display. You will be directed to your destination by spoken and visual instructions. The Map button cycles through the 3D Map, 2D Map, Traffic Overview, Route Overview and Turn-by-Turn™ screens. 3D Map screen The 3D Map screen displays your current position and follows your direction of travel. Tap and drag the screen, to move across the map.
S-Series Item Zoom Map Mute/unmute volume, TMC, Bluetooth™, phone, battery, GPS and compass information. Description . To view zoom options, tap To zoom out, tap To zoom in, tap . . The Map button allows you to cycle through different map screens. Tap to expand and see the following options: Mute/unmute volume. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76. Bluetooth and phone indicator.
S-Series 2D Map screen The 2D Map screen shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and turns are highlighted. The 2D Map screen follows your direction of travel unless the Map Display preference is set to North (see “Map Display” page 74). Tap and drag the screen, to move across the map. Tap the map, to view the Map Menu (see "How do I use the Map Menu?" on page 58).
S-Series Item Description Map The Map button allows you to cycle through different map screens. Mute/unmute volume, TMC, Bluetooth™, phone, battery, GPS and compass information. Tap to expand and see the following options: Mute/unmute volume. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76. Bluetooth and phone indicator. The icon is grey when Bluetooth is on but a phone has not been paired. Battery charge indicator.
S-Series Traffic Overview screen Depending on your Navman model, traffic information may not be available or may require a traffic cradle. The Traffic Overview screen displays a general overview of the traffic situation on your route, including all events in the immediate vicinity. Tap and drag the screen, to move across the map. Tap the map, to view the Map Menu (see “How do I use Map Menu?” on page 45) Item Description Your final destination.
S-Series Item Mute/unmute volume, TMC, Bluetooth™, phone, battery, GPS and compass information. Description Tap to expand and see the following options: Mute/unmute volume. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76. Bluetooth and phone indicator. The icon is grey when Bluetooth is on but a phone has not been paired. Battery charge indicator. GPS status indicator.
S-Series Route Overview screen The Route Overview screen gives you a bird’s eye view of your trip. Note: A route must first have been calculated for this screen to be available. Tap and drag the screen, to move across the map. Tap the map to view the Map Menu (see "How do I use the Map Menu?" on page 45). Note: Depending on the country you are travelling in, the colour of the direction and distance buttons may differ from the above example.
S-Series Item Description Cancel route Cancels your current route. Zoom To view zoom options, tap Map Mute/unmute volume, TMC, Bluetooth™, phone, battery, GPS and compass information. To zoom out, tap To zoom in, tap . . . The Map button allows you to cycle through different map screens. Tap to expand and see the following options: Mute/unmute volume. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76.
S-Series Turn-by-Turn screen The Turn-by-Turn screen displays the next four turns of your route, the turn direction, the street name and the distance to the turn. You can view all the turns in the list, using the up and down arrows. A route must first have been calculated for this screen to be available. Note: A route must first have been calculated for this screen to be available.
S-Series Item Mute/unmute volume, TMC, Bluetooth™, phone, battery, GPS and compass information. Description Tap to expand and see the following options: Mute/unmute volume. TMC traffic status indicator. For more information, see “How does my Navman receive traffic information?” on page 76. Bluetooth and phone indicator. The icon is grey when Bluetooth is on but a phone has not been paired. Battery charge indicator. GPS status indicator.
S-Series How do I use the Map Menu? The Map Menu allows you to access navigational functions from the 3D Map and 2D Map screens. Displaying the Map Menu 1. Tap 2. Tap and drag to move around the map to your selected location. 3. Tap the map. The Map Menu will display. to display the 3D Map or 2D Map screen. Map Menu options The following options are available via the Map Menu: Menu Option Description Navigate To Calculates a route from your current location, if your Navman has a GPS fix.
S-Series How do I avoid an area? Your Navman can calculate a route that avoids a specified area on the map. Avoid Areas are displayed as shaded areas. CAUTION If no alternative route around an Avoid Area exists, the route calculation will fail. CAUTION If your destination is in an Avoid Area, you will be routed into that Avoid Area. How do I add an Avoid Area? 1. Tap the 3D Map or 2D Map screen to display the Map Menu. 2. Select Add Avoid Area. 3.
S-Series How do I preview a route? Route demonstration allows you to: Preview a route. Plan and view a route without a GPS fix, such as when you are inside a building. The following steps will show you how to preview one route. 1. Select a departure point If you have a GPS fix, you do not need to select a departure point unless you want the demonstrated route to start elsewhere. a) Tap the 3D Map or 2D Map screen at your departure point. The Map Menu will display. b) Tap Route.
S-Series How do I view my route statistics? The Navman provides information on your: distance travelled average speed maximum speed time taken for trip stationary time. Trip information is presented in two different ways. These are: information for the current trip information for all trips to date, or since the tripmeter was last reset.
S-Series How do I view statistics of my trips to date? The Tripmeter - Global screen is used to view statistical information for all of your trips to date, or since the trip meter was last reset. The Tripmeter - Global screen will display. Complete one of the following: If you want to ... view your trip logs Then ... tap view statistics for your current route tap reset the tripmeter to display the Trip Recorder screen. to display the Tripmeter - Current Route screen. tap Reset.
S-Series How do I view my trip logs? Note: Trip Recorder is only available on some models. The Trip Recorder screen is used to record trip logs of your current trip. The Trip Recorder only records trip logs if you have chosen to record the logs. The Trip Recorder screen will display. Complete one of the following: If you want to ... Then ... View statistics for your trips to date tap stop recording your trip logs tap Stop Logging.
S-Series How do I manage my NavPix? Pictures with a GPS fix are called NavPix and can be used to navigate to the photographed location. Album management The albums contain all your NavPix and display them as thumbnails. You can store your NavPix in customizable albums on the Navman internal memory or on your memory card. Element Description Browse Displays the Select an Album screen, from where you can select another album.
S-Series How do I copy NavPix to my memory card? NavPix can be copied from the albums on your Navman internal memory to your memory card and vice versa. Note: The first time a NavPix is copied to your memory card, a folder will be created on the memory card called NavPix. 1. From the Album screen, tap Browse. The Select an Album screen will display. 2. Select the Album you want to view. 3. Tap and hold, then drag across the screen to select the NavPix you want to copy.
S-Series NavPix management The NavPix Details screen displays information about your NavPix. Tap a NavPix to display the Photo Details screen. Element Description Thumbnail A thumbnail of the NavPix. Tap to display the NavPix in full-screen. NavPix Title The title of the NavPix; tap Edit to add a title or edit the existing title. Show on Map When selected, displays an icon on the map at the location the NavPix was taken.
S-Series How do I view a NavPix in full-screen? 1. From the NavPix Details screen, tap the thumbnail of the NavPix. The NavPix will appear in full-screen. 2. Complete the following: Note: The icons disappear after a few seconds; tap the screen to have them reappear. If you want to ... Then ... zoom into the NavPix tap . tap . tap . zoom out of the NavPix rotate the NavPix The NavPix will rotate 90 degrees anticlockwise each time NavPix is saved at the new angle.
S-Series How do I navigate to a NavPix? Your Navman contains preinstalled NavPix that you can navigate to. If you have not yet navigated to a NavPix, three of the preinstalled NavPix will display on the Go To NavPix screen. Otherwise, three of your recently used NavPix are displayed. Note: To navigate to a NavPix location, either a GPS fix must have been available when the NavPix was taken, or GPS coordinates have been added using NavDesk. How do I navigate to a recent NavPix? 1.
S-Series How do I save a NavPix to a favourite? Note: When a NavPix is saved to an existing favourite, only the image, and not the GPS coordinates, are associated with the favourite. 1. From the Album screen, select and tap a NavPix. The NavPix Details screen will display. 2. From the NavPix Details screen, tap Assign. The Save Photo screen will display. 3. Complete the following: If you want to ...
S-Series How do I save a NavPix to a POI? Note: Only a NavPix with embedded GPS coordinates can be saved as a POI. 1. From the Album screen, select and tap a NavPix. The NavPix Details screen will display. 2. From the NavPix Details screen, tap Assign. The Save Photo screen will display. 3. Tap Save as POI. The Select POI Categories screen will display. 4. Complete the following: If you want to ...
S-Series How do I make a hands-free call? Hands-free calling is not available on all models. If you have a mobile phone with Bluetooth wireless technology, you can use your Navman as a hands-free car kit. Models with Bluetooth capabilities can exchange information over a distance of about 10 metres (30 feet) without requiring a physical connection. Note: Before you can use this feature you must pair your mobile phone with your Navman.
S-Series How can I make a phone call using the Dial screen? 1. Enter the number you want to call. Note: The number of the last call displays when you next access the Dial screen. The number will be cleared as you start entering the number. To delete the last digit entered, tap . To clear the entire number, tap and hold . Tip: International calls require a country code to be included in the phone number. On your Navman, the country code is separated from the rest of the number sequence by a +.
S-Series How do I receive a phone call? When you receive a call, the Incoming call screen will display. Tap to answer the call or Tap to end or cancel the call. to reject the call. How do I add a contact to my Navman? Your Navman uses contacts created on your mobile phone. To add a new contact to your Navman, you must first add it to your mobile phone. Refer to your mobile phone user manual for more information.
S-Series 3. Complete the following: If you want to… Then… call the contact at their home tap . tap . tap . tap and then tap Yes to confirm. call the contact at their work call the contact on their mobile delete contact from your contact list How do I view my call history? From the Call log screen you can view a list of Incoming Calls, Outgoing Calls and Missed Calls. Note: The call history lists the calls made during the time your Navman is connected to a mobile phone.
S-Series How do I receive current traffic information? Traffic information is only available in selected countries. Your Navman can receive current traffic information for all main roads and motorways, enabling you to avoid potential delays on your route. Event messages and traffic icons will display as they occur. If an event message obscures your current location, the map will adjust to display both the message and your location.
S-Series How will I know when a Traffic Event occurs? Incoming events are handled according to your Traffic preferences. For more information, see "How do I customize Traffic preferences?" on page 77. When travelling through an area in which you can receive traffic status, your Navman will decode these events and display them on-screen. An icon will display at the event location on the map screens, and an audible warning is given if an event is on your route.
S-Series How do I view a list of all events on my route? Your Navman creates a list of events as they are received, which is displayed on the Event List screen. This screen can only be viewed if the TMC icon is green or orange. From the Traffic Overview screen, tap . Item Description Event description Displays details of the Event, including: Name of road and direction in which Event is taking place. Location of where Event begins and ends. > indicates an Event from a location, to a location.
S-Series How do I view traffic details? There are several ways to view details of an event received by your Navman. Choose one of the following: Location Option From any of the screens used to view your route Tap the Event message when it appears on screen. The Event Details screen will display. . Tap The Event List screen will display. Select and tap the event you want to view. The Event Details screen will display.
S-Series How do I know if a detour is recommended? When a Traffic or Clearance event occurs on your route, a detour will always be recommended. The detour event message will display in the status bar on map screens. Note: Detours are only recommended for Traffic or Clearance Events on a calculated route. How do I avoid an event on my route? From the Traffic Overview screen, tap . 1. From the Event List screen, tap the event. The Event Details screen will display. 2.
S-Series Traffic Messages The Event Details screen displays detour status information. Detour Not Available messages If a detour is not available, one of the following messages will display: Message Description This Event is not locatable A specific location for the Event cannot be identified. This clearance is not locatable This Event does not affect your route The Event is not on the current leg of your journey, or is behind your current position.
S-Series What can I customize? There are various customization options available to enhance your navigation experience. To move forward through the Preferences screens, tap To revisit the previous screen, tap . 68 .
S-Series Route Options You can enhance your navigation experience by modifying aspects of your route and route calculation. Route Calculation 1/4 Complete the following: If you want to... Then... change the route type move the Route Type slider towards Fastest time to give high priority to the fastest time when calculating a route. move the Route Type slider towards Shortest distance to give high priority to the shortest distance when calculating a route.
S-Series Road Types 2/4 Complete the following: If you want to... Then... avoid toll roads select the Toll roads check box in the Avoid column. receive a warning if your route includes toll roads select the Toll roads check box in the Warn column. The warning will display at the start of every trip containing a toll road. avoid unsurfaced roads select the Unsurfaced roads check box in the Avoid column.
S-Series Driver Alerts 3/4 Complete the following: If you want to... Then... enable a visual warning if the Main Menu screen is accessed in a moving vehicle select the Warn me not to operate my Navman while driving check box. enable a warning chime when travelling at or above the speed and select your preferred speed when limit unavailalble select the Enable speed warning check box and select your preferred speed from the Speed box.
S-Series Data Recording 4/4 Complete the following: If you want to... Then... record a GPS log of your trips select the Enable GPS data logging check box. record mileage that can be imported into NavDesk to create expense reports select the Enable trip recording check box. Your preferences are automatically saved.
S-Series Map Display You can change the look and behaviour of the Map screens by customizing the Map Display preferences. Map Display 1/3 Complete the following: If you want to... Then... change the map colour scheme select your preferred scheme from the Map Scheme box. set the screen contrast to automatically adjust select the Auto day/night option. improve screen contrast in light or dark conditions select either the Day or the Night option to manually adjust the contrast.
S-Series Map Display 2/3 Complete the following: If you want to... Then... enable automatic zooming during navigation select the Auto-zoom on main map screens check box. If selected, the 3D Map screen will automatically zoom in or out, depending on your speed, to allow optimal viewing of your route. display North at the top of the 2D Map screen select the Keep North at top of 2D Map screen check box.
S-Series Select Map 3/3 Complete the following: If you want to... Then... use maps from a different continent select a different continent from the maps you are currently using. When selected, the maps for the new continent will load and the 3D Map screen will display. Your preferences are automatically saved.
S-Series Map POIs Points of Interest (POIs) are grouped into categories. You may choose to either display (or hide) icons of all POI categories on the map screens, or only display the icons from selected categories. For example, you may only be interested in entertainment venues and want to disable other categories such as schools. Complete the following: If you want to... Then... display all POI icons (ie, icons from all categories) Tap Turn All On. display no POI icons Tap Turn All Off.
S-Series Volume Complete the following: If you want to... increase or decrease the volume Then... move the Volume slider towards High to increase the volume. move the Volume slider towards Low to decrease the volume. hear a tone when you tap the touch screen select the Audio check box. hear keyboard characters spoken to you select the Speak keyboard letters check box. Your preferences are automatically saved.
S-Series Screen Display Complete the following: If you want to... change the screen brightness Then... move the Screen Brightness slider towards Bright to increase screen brightness. move the Screen Brightness slider towards Dim to decrease screen brightness. Warning: Your Navman can heat up when the Brightness scale is set above 70% - i.e., when more than seven rectangles are coloured - therefore, use lower brightness whenever acceptable. Your preferences are automatically saved.
S-Series POI Alerts The POI Alert preferences allow you to set a warning chime and/or visual warning to Point of Interest categories that you have installed via NavDesk (Custom POIs). You may also be able to set warnings to certain POI categories that were preinstalled on your Navman or available by subscription, such as Safety Cameras. If you have a route set, the warnings will occur when you are a certain distance (set by the Warning Distance preference) from the POI on your route.
S-Series GPS GPS Status 1/2 Signals are transmitted by Global Positioning System (GPS) satellites orbiting the Earth. The GPS Status screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with ground speed and the heading in degrees. The strength of each satellite is displayed on a bar chart. The satellites available from your current position are shown as grey, red and green coloured bars: Bar colour Description Grey No signal.
S-Series Set GPS Mode 2/2 Complete the following: If you want to... Then... use GPS select the Normal option. use WAAS select the WAAS (only available in USA) option. use EGNOS select the EGNOS (only available in Europe) option. Note: WAAS - Wide Area Augmentation System is a navigation system developed for civil aviation by the Federal Aviation Administration (FAA), a division of the United States Department of Transportation (DOT).
S-Series Language Complete the following: If you want to... Then... enable voice guidance select the Enable voice guidance check box. change the voice scheme select your preferred voice scheme from the Voice Guidance box. change the on-screen language select your preferred language from the Language box and tap Yes. Note: Only voice schemes that are compatible with the chosen language are displayed. Your language preference is saved and the map screen is displayed.
S-Series Traffic You can view your current traffic system status and change options by customizing the traffic preferences. Traffic System Status OR From the Traffic Overview screen: The Tuner section displays the name and frequency of the radio station currently being used to receive traffic event information. A bar shows the strength of the traffic signal being received; the more green bars, the stronger the signal. Complete the following: If you want to... Then...
S-Series Traffic Event Notification OR From the Traffic Overview screen: Complete the following: If you want to ... Then ... turn on/ off traffic event notification select the Notify me about nearby traffic events check box to receive traffic event notification. clear the Notify me about nearby traffic events check box to turn off traffic event notification. Note: Event icons will still display on the 3D and 2D Map screens.
S-Series Select event sorting type From the Traffic Overview screen: Complete one the following: If you want to ... Then ... sort events by distance select the Distance check box. sort events by road name select the Road name check box. sort events by age select the Age check box only see events that occur on your route select the Only show events on my route check box. Your preferences are automatically saved.
S-Series Power The Battery Status bar shows the percentage of power left in the Navman battery; the words External Power will display when the battery is charging from an external power source. To charge the battery, see "Internal battery" on page 14.
S-Series Select Keyboard Complete the following: If you want to... Then... use an alphabetic keyboard for entering information select the Use alphabetic type (a, b, c...) option. use a QWERTY keyboard for entering information select the Use QWERTY type option. use a keypad-type keyboard (predictive text) when searching for an address select the Use keypad type (abc, def...) for address searches check box. Your preferences are automatically saved.
S-Series Units You can change the units used by your Navman by customizing the measurements preferences. Units 1/2 Complete the following: 1 If you want to... Then... change the time format select either the 12 hour or 24 hour option change the distance units1 select your preferred distance unit type from the Distance Units options. Your preferences are automatically saved. Only available when AU English, UK English or US English language is selected.
S-Series Units 2/2 Complete the following: If you want to ... Then ... change the latitude, longitude position format select either the Decimal degrees or the Degrees, minutes and seconds option. Your preferences are automatically saved.
S-Series Start-up Complete the following: If you want to... Then... show the Tutorial when you turn on your Navman select the Show the Tutorial checkbox. show the Language Selection screen when you turn on your Navman select the Show the Language Selection screen checkbox. Your preferences are automatically saved.
S-Series Bluetooth preferences If you want to… Then… enable Bluetooth select the Enable Bluetooth check box. to automatically connect to the last paired mobile phone select the Auto-connect to last paired device check box. Note: This option is not available on all models. Your preferences are automatically saved.
S-Series Saved Information Complete the following: If you want to... Then... delete recent locations tap Delete Recent Locations. delete favourites tap Delete Favourite Destinations. delete avoid areas tap Delete Avoid Areas. restore factory default settings tap Restore Factory Defaults. Note: The Restore Factory Defaults option does not delete recent locations or saved favourite destinations. clear all settings; for example, for use in a rental car complete all of the above.
S-Series Tutorial The Tutorial displays when you turn your Navman on, unless you have cleared the Show tutorial on start-up check box. You can view the Tutorial at any other time: To prevent the Tutorial from displaying again on startup, clear the Show tutorial on startup check box to clear it. To move forward through the Tutorial screens, tap To revisit the previous screen, tap . .
S-Series About This preference contains copyright and trademark information. Shop Demo Complete the following: If you want to... Then... enable a shop demonstration of Smart to be played tap Shop Demo on the preference screen. After a short delay, a route will be demostrated.
S-Series What is NavDesk? NavDesk is a suite of tools you can use to access greater functionality and product information via your computer. NavDesk allows you to: obtain software updates search online for local POIs manage maps manage custom POIs manage safety camera subscriptions report trip mileage transfer pictures from your Navman using NavAlbum browse the Navman website for special offers.
S-Series How do I install NavDesk onto my computer? Note: Before you begin: Ensure that your computer meets the minimum system requirements for NavDesk, especially: i. Ensure that Internet Explorer 6 or higher is installed on your computer before you install NavDesk, even if it is not your default browser. ii. Windows XP users, ensure that Windows XP Service Pack 2 or higher has been applied before you install NavDesk. 1. Close all programs on your computer. 2.
S-Series NavDesk features Depending on your Navman model, some NavDesk features may not be available. Start All Programs Navman NavDesk Element Description Menu bar Menus that provide access to basic NavDesk functionality. Navman online Displays the Navman website. My Maps Application used to install and manage maps. My Subscription Information on your current subscriptions, including safety camera subscription. NavAlbum Application used to transfer NavPix from your Navman to your computer.
S-Series How do I keep NavDesk up-to-date? We recommend that you regularly use NavDesk to check the Navman server for NavDesk software updates. How do I update NavDesk? Start All Programs Navman NavDesk Tools Options General Select Auto check for updates checkbox. When you select this option, every time you access NavDesk, the latest service packs and bug fixes if available are downloaded from the Navman server and applied to your Navman.
S-Series My Maps The My Map application allows you to install new maps, remove maps from your device and purchase new maps. Start All Programs Navman NavDesk My Maps Element Description Zoom In Click to zoom in. Continent A drop down list of continents that have maps available for your Navman. Map Source A list of maps on the DVD or available for purchase via the Navman store website. My Navman A list of maps installed on your Navman. Zoom Out Click to zoom out.
S-Series How do I install maps onto my Navman? Your Navman comes with one or more pre-activated maps. You can install maps from the enclosed DVDs to a memory card or your Navman internal memory; however you may need to purchase a Map Product Key to activate the maps. Which map should I install? If you are not sure which map contains the town or city that you want to install, you can use the Find City window to identify the correct map.
S-Series 6. 7. Follow the prompts to activate your Map Product Key, including: Enter the Map Product Key when prompted. Your computer will connect to the Internet and activate your Map Product Key. When activation has completed, the map will change colour to amber; continue to step 7. Click the map you want to install to your Navman. The map will change colour to yellow to indicate it has been selected. To deselect a map, click the map again.
S-Series How do I remove maps from my Navman? 1. Click My Maps. The My Maps application will display. 2. From the My Navman panel, select the check box next to the map you want to remove. 3. Click Remove Maps to remove the selected maps. 4. Confirm that you want to remove the selected map when prompted. The map is removed from your Navman. How do I know which map contains a particular city or town? Use the Find City window to find the map that contains a particular city or town. 1. Click My Maps.
S-Series What is a Major Road Network map? Navigation between particular countries is not available on all models. Continuous continental navigation Major Road Network maps allow you to seamlessly navigate between installed maps without installing maps of all regions along your route. Each Major Road Network map covers a large area, such as Western Europe, and contains main roads that connect cities and towns.
S-Series NavAlbum Depending on your Navman model, certain NavAlbum features may not be available. NavAlbum is a NavDesk application which allows you to copy, delete or move pictures or albums between the NavPix library on your Navman and the NavPix library on your computer. You can upload them to www.navpix.net to share with other NavPix users. Start All Programs Navman NavDesk NavAlbum Element Description NavPix menu Gives access to NavAlbum functionality.
S-Series Toolbar The following options are available on the toolbar: Button Description Create new album Click to create a new album in the NavPix library you are viewing. Rotate left Rotates the selected NavPix 90° to the left. Rotate right Rotates the selected NavPix 90° to the right. Transfer to your Navman or If you are viewing NavPix in the NavPix library on your computer, this will display as Transfer to your Navman. Click to transfer the selected NavPix to your Navman.
S-Series How do I use NavAlbum? Tip: Before you begin, ensure your Navman is correctly plugged into your computer: Plug the large end of the USB cable directly into a USB port on your computer (not a USB hub); plug the small end into on the side of your Navman. How can I view and edit pictures or albums on my computer? If you want to ... Then ... rotate a picture to left select the picture from the Album display area. click Rotate left on the toolbar.
S-Series What else can I do with pictures and albums on my computer? From the NavPix library on your computer, you can: add a picture to another album remove pictures from an album view and edit details of a selected picture upload pictures to Flickr™ export to disk export pictures to Google Earth™ upload pictures to NavPix online library search for pictures view all pictures in the library If you want to ... Then ...
S-Series NavAlbum Preferences Tools Options NavAlbum Complete one of the following: If you want to ... Then ... change your NavPix location on your computer click Change. The Save As dialog box will open. select a location for your NavPix library. click Save. The warning message will display and you will be prompted to confirm your action. Your NavPix library is moved to the new location.
S-Series Image Search Image Search is a NavDesk application powered by Flickr™ allowing you to download photos and import them to NavAlbum. You can then upload the photo to either the NavPix or Flickr websites, transfer photos to your Navman, export pictures to Google Earth or search for other NavPix near the longitude and latitude of your NavPix. Start All Programs Navman NavDesk Image Search How do I download NavPix from the internet? 1.
S-Series Mileage Reporter Mileage Reporter is not available for all models. Mileage Reporter is a NavDesk feature that allows you to create expense reports (.csv format) based on the mileage and estimated fuel usage recorded by your Navman. Start All Programs Navman Mileage Reporter Element Description Timeframe specifies the time for which the mileage report will be created. NavDesk Select Show All to include all recorded mileage. Report panel displays your trip logs.
S-Series How do I export a mileage report? 1. Select a trip log from the report panel section. 2. Click Export report on the Report data button section. The open dialog box will open. 3. Select the file from your local or network drive, enter a name for your mileage report and then click Save. Note: Mileage report is saved in .csv format. You can view your mileage report by clicking on the file. How do I delete travel logs from my Navman? 1. Select a trip log from the report panel section. 2.
S-Series My subscriptions Safety camera information is only available for selected countries. Your Navman contains pre-loaded safety camera information. To subscribe to current Navman safety camera information, use the enclosed DVD to install NavDesk software on your computer. For the latest safety camera coverage, to subscribe to safety camera information and to see our latest offers, visit www.navmanstores.com. Each country has a coloured circle indicating the status of your subscription.
S-Series Activate your Subscription Start All Programs Navman NavDesk 1. From Available Subscriptions section, select the country for which you want to activate the safety camera. 2. Right click and select Activate my subscription. The Activation window will display. 3. Enter the subscription product key in the Product Key field. 4. Click Continue. Follow the prompts to update your subscription. Your software will update automatically.
S-Series Custom POIs Depending on your Navman model, Custom POIs features may not be available. The Custom POI application allows you to create or import your own POI files. These are called custom POIs. Unlike preinstalled POIs, custom POIs can be removed from your Navman and can have audio as well as visual alerts associated to them.
S-Series 4. Complete the following: If you want to ... Then ... select an icon to display on the map screens for POIs of the category Click Browse to select the icon file from your local or network drive. When you have located the icon file, select it and click Open. The icon file must be a bitmap (.bmp) graphic with a minimum size of 6x6 pixels and a maximum size of 32x32 pixels. Note: If you do not select a custom icon, a default icon will display.
S-Series Voice Transfer The Voice Transfer application is part of NavDesk and allows you to install or remove voice files. Voice files take up space on your Navman’s internal memory. If you do not use a voice file, you can remove it to free up space. You can later reinstall it to your Navman if required.
S-Series How do I backup my Navman? You can save backups of the following information, and later restore them to your Navman: Favourites and My Home Preferences, including Point of Interest and NavPix preferences Multi-stop trips Recent locations. How do I Backup my Navman? 1. Tools Backup Restore The Backup & Restore window will open. 2. Click Create new. The Create new backup window will display. 3.
S-Series Reference How do I insert a Memory Card? Hold the card by the edges and gently insert it into the slot with the label facing the front of the Navman. S30 Deluxe/S30 Traffic S80 Deluxe CAUTION Do not to apply pressure to the centre of the memory card. How do I remove a Memory Card? Before removing the memory card, turn off the Navman. Next, gently push the top edge of the card to release it, and pull it out of the slot.
S-Series Point of Interest categories Icon Description Icon Description Airline Access Airport Amusement Park Arts or Cultural Centre Bank Beach Boat Ramp Breakdown Service, Car Repair Facility Building Camping Ground Car Dealer Caravan Park, Trailer Park Cash Dispenser Casino Centre of Settlement Church Cinema City Centre College or University Company Concert Hall, Music Centre, Opera Convention Centre, Exhibition Centre Courthouse Cultural Centre Dentist Doctor Drive-Through
S-Series Icon Description Icon Description Railway Station Rent-a car Parking Rest Area Restaurant Area Scenic or Panoramic View School Shop Shopping Centre Stadium Swimming Pool Tennis Court Theatre Tourist Information Office Travel Agency Vehicle Equipment Provider Veterinarian Water Sports Winery Yacht Basin Zoological park (zoo) Branded Points of Interest Branded Points of Interest are available on some maps.
S-Series Traffic and other TMC Events Each TMC Event is sorted in to one of nine categories. When an Event is received, one of the following icons will display: Event Avoided Event Message Type Event Description Danger There is a dangerous situation on the route; for example, people are on the road. Traffic Any event that will cause a delay on a route. Weather Weather conditions are adversely affecting a route; for example, there is ice on the road.
S-Series Safety Camera POIs Navman products are designed to be used as an aid to safer driving. You can receive messages to alert you to locations of safety cameras, which will enable you to monitor your speed through these areas. Navman does not warrant that all types and locations of safety camera data are available, as cameras may be removed, relocated or new cameras installed. Navman does not condone speeding or any other failure to comply with your local traffic laws.
S-Series Copyright © 2008 MiTAC International Corporation. Navman is either a registered trademark or trademark of MiTAC International Corporation and is used under licence by Navman Technology NZ Ltd. All rights reserved. The software contains proprietary information of MiTAC International Corporation; it is provided under a licence agreement containing restrictions on use and disclosure and is also protected by copyright law. Reverse engineering of the software is prohibited.
S-Series For more information Online support For 24/7 help and support with Navman products, visit our Technical Support website at: support.navman.com You will find a fully searchable Frequently Asked Questions (FAQs) section for all Navman products. At least 90% of our customers find answers to their questions at support.navman.com, however if you require further support, you can use the online email option to contact us.
DOC-120-A
