Smart™ 2005 for Pocket PC User Manual English - Europe / Australia / New Zealand
Smart 2005 for Pocket PC | User Manual Contents 1. Introduction ............................................................................ 5 Upgrading from Previous Version of Smart ......................... 6 2. Pocket PC Features ............................................................... 8 3. Installing Smart .................................................................. 9 4. Smart Desktop ................................................................. 11 5. Updating Smart .............
Smart 2005 for Pocket PC | User Manual 4
1. Introduction Thank you for purchasing Smart 2005 for Pocket PC. We hope you enjoy using your new GPS navigation software. Whether you travel in your own country or elsewhere, Smart will direct you to your destination without the need for map books and second-hand instructions. The Global Positioning System (GPS) is available free of charge, at any time, and is accurate to within 5 m (15 ft).
Getting started Smart 2005 for Pocket PC | User Manual Upgrading from Previous Version of Smart To upgrade your version of Smart to version 2005, you must first uninstall previous versions of Smart Desktop from your computer and Smart from your Pocket PC. Your maps, Favourites, Quick Navs and settings will be retained unless you are upgrading from Smart V1.90 (Product Key: SSP-190-XXXXX-XXXXX) or 1.91 (Product Key: SSP-191-XXXXX-XXXXX). Note: This upgrade procedure does not apply to PiN 570.
. Uninstall SmartST from your Pocket PC using the Remove Programs feature in your Pocket PC Windows® Settings panel: Start Settings System tab Remove Programs. 8. Uninstall Navman SmartST Desktop from your computer if it has previously been installed, using the Add or Remove Programs feature in your Windows Control Panel: Start Control Panel Add or Remove Programs.
Getting started Smart 2005 for Pocket PC | User Manual 2. Pocket PC Features 4-Way Toggle The style of the 4-way toggle differs between models of Pocket PC. It may be referred to as a navigation button or navigation stick; it may be a 5-way toggle. See your Pocket PC manual to identify the 4-way toggle. Note: The Acer® n30 Pocket PC does not have a toggle. To use Smart, you must first assign Button 1 to
3. Installing Smart Begin by installing Smart Desktop on your computer. Then install and register Smart on your Pocket PC, activate and download the maps you require from Smart Desktop. You will need an Internet connection to complete activation. Note: Windows XP users, ensure XP Service Pack 1 or higher is installed before you install Smart Desktop. Microsoft ActiveSync Microsoft ActiveSync is used to establish a connection between your Pocket PC and your computer. Smart requires ActiveSync 3.7.
Getting started Smart 2005 for Pocket PC | User Manual Step 2. Install and Activate Smart on your Pocket PC 1. Close all open programs on your Pocket PC. 2. Connect your Pocket PC to your computer via Microsoft ActiveSync 3.7.1 or higher. • Microsoft ActiveSync will synchronise with your Pocket PC. 3. Open Smart Desktop if it is not already open: Start Programs Navman Smart Desktop 2005 for Pocket PC. 4. Follow the prompts to install Smart on your Pocket PC.
4. Smart Desktop Smart Desktop is used to manage maps to and from your Pocket PC, obtain software updates, manage Custom Points of Interest (POIs) and install Basemaps. To Open Smart Desktop Once Smart Desktop has been installed, you can access it from the Start menu: Start Programs Navman Smart Desktop 2005 for Pocket PC Desktop and Pocket PC tabs Selected maps Map Display screen Download selected maps to the Pocket PC, memory card or memory card reader (not supplied).
Getting started Smart 2005 for Pocket PC | User Manual 5. Updating Smart Update your Smart software to the most recent version by accessing the Navman website through Smart Desktop. To update your Smart software, complete the following steps: 1. If you connect to the Internet via a dial-up connection, connect to the Internet now. 2. Open Smart Desktop: Start Programs Navman Smart Desktop 2005 for Pocket PC 3. On the Setup menu, select Update software then Check for updates on the web.
6. Installing and Removing Maps with Smart Desktop Smart comes with one Map Product Key that will allow you to install one map. If you require an additional map, you must first purchase an additional Map Product Key from your Navman supplier. Use Smart Desktop to activate your Map Product Key and install the required map. Installing New Maps a. Insert a memory card into your Pocket PC, if you will be installing more than one map or if you will be installing one map of a large region. b.
Getting started Smart 2005 for Pocket PC | User Manual • When activation has completed, the map will change color (the default color for activated maps is light green), proceed to step i. The activated map is displayed in light green. i. Click the map to install to your Pocket PC. The map will change color to indicate it has been selected (the default color for selected maps is dark green). The map is now listed in the Selected section of the Desktop Selected Maps tab. j.
Removing Old Maps Before you can install a Smart 2005 map, you must first remove the old version of the map, as you cannot use an old map and a Smart 2005 map of the same area. Complete the following for each map that you are upgrading: a. Connect your Pocket PC to your computer (if it is not already connected) using a USB cable, synchronisation cradle or other device that came with your Pocket PC. • Microsoft ActiveSync will syncronise with your Pocket PC. b.
Getting started Smart 2005 for Pocket PC | User Manual 7. Starting Smart By now, you have installed Smart on your Pocket PC and, if required, mounted your GPS receiver in your vehicle. You are now ready to start Smart and ensure that your Pocket PC and GPS receiver are communicating successfully. 1. Refer to your GPS receiver manual about how to establish a valid GPS communications link between your Pocket PC and GPS receiver. 2.
Main Menu Screen The Main Menu screen provides access to all Smart functions, including navigating to a destination. 1. From the 2D Map screen, open the Main Menu screen by pushing the 4-way toggle 2. Tap , to display more Main Menu options. 17 .
Getting started Smart 2005 for Pocket PC | User Manual 8. GPS Setup The Global Positioning System (GPS) comprises a collection of satellites orbiting Earth that transmit signals to your Pocket PC. To navigate to a destination using Smart, you must first obtain a GPS fix. Getting a GPS Fix To obtain a GPS fix, your Pocket PC must have a clear view of the sky. , then GPS Status. 1. From the Main Menu, tap The GPS Status screen will open: 2.
GPS Status Screen The GPS Status screen provides a visual representation of the information being received. Latitude and longitude are displayed, along with a north-pointing compass, ground speed and the heading in degrees. Available satellites are shown as segments.
Getting started Smart 2005 for Pocket PC | User Manual GPS Status Messages The GPS status messages are displayed on the 2D Map, 3D Map, Next Instruction and GPS Status screens. These messages provide feedback on the status of the GPS receiver connection. The following table explains the meaning of these messages and includes suggested actions. Status Message Meaning Suggested Action GPS PORT CLOSED A GPS COM port has not been opened.
9. Setting your Destination Before you travel, specify a destination and Smart will plan your route. You may select a destination using any of the Destination menu options. Note: Depending on the destination country, some fields may be unavailable when selecting a destination. Entering Destination Text Use the keyboard to enter text into the appropriate boxes on the Destination screens.
Getting started Smart 2005 for Pocket PC | User Manual Address Search Rules The following rules apply when searching for a destination in Europe: Street Names with Dates If a street name contains a date or a number, search by the first number: Example 1: If searching for “Faubourg du 13 Juillet 1920”, search by “13”. Example 2: If searching for “Avenue du 14 Avril 1914”, search by “14”. Example 3: If searching for “Rue de la 1 ere Armée”, search by “1”.
Navigating to a Street Address 1. From the Main Menu, tap Destination, then Address. The Destination Address screen will open. Note: If you have previously selected a destination and not subsequently exited Smart, the last address will display. 2. Select a country from the Country drop-down box. 3. Type and select the destination address starting in any box, as follows: Box Action Postcode • Tap the Postcode box. The Destination Address - Postcode screen will display.
Getting started Smart 2005 for Pocket PC | User Manual 4. Complete one of the following: • To calculate and display your route, tap The 3D Map screen will open. . • To display the address without calculating the route, tap The 2D Map screen will open. . • To add the address as a Favourite, tap . The Favourite will be saved with the name of the road. Navigating to the Intersection of Two Streets 1. From the Main Menu, tap Destination, then Intersection. The Destination Intersection screen will open.
3. Type and select the destination address: Box Action Area • Tap the Area box. The Destination Intersection - Area screen will display. • Type the name of a geographical location such as a town, city, state or county in the Area box. • Select the area from the list that displays. . • Tap The Destination Address screen will reopen. Road 1 • Tap the Road 1 box. The Destination Intersection - Road 1 screen will display. • Type the name of a road in the Road 1 box.
Getting started Smart 2005 for Pocket PC | User Manual Navigating to a Point of Interest (POI) A POI is a named site, feature, landmark or public venue which can be displayed as an icon on the map. POIs are stored in types, such as parks and museums. Note: You can also navigate to a POI via the Pop-up menu. See page 39. 1. From the Main Menu, tap Destination, then Points of Interest. The Points of Interest screen will open. 2. Select a country from the Country drop-down box. 3.
Navigating to a Favourite To navigate to a Favourite, see Using Favourites, page 44. Navigating to a Contact Address Addresses stored in your Pocket PC Contacts database can be used to set a destination. The contact address must be contained on an installed map. 1. From the Main Menu, tap Destination, then Contact. The Find Contact screen will open. 2. Type the name of your contact in the Name box. Select the contact name from the list that displays. 3.
Getting started Smart 2005 for Pocket PC | User Manual Navigating to a Recent Destination The last 20 routes are stored as recent destinations. 1. From the Main Menu, tap Destination, then Recent. The Recent Destinations screen will open. 2. Select a destination from the list. 3. Complete one of the following: • To calculate and display the route, tap The 3D Map screen will open. . • To display the address without calculating the route, tap The 2D Map screen will open. 28 .
10. Using the 2D Map Screen to Plan a Route You can plan a route directly from the 2D Map screen using the Pop-up menu. For more information on the Pop-up Menu, see page 39. 1. From the Main Menu, tap Map. The 2D Map screen will display. 2. Scroll the map by dragging the stylus, then lifting it off the map. Repeat until your destination is visible. • Zoom in or out of the map as required to locate your destination, using to zoom out. 3. Tap and hold the road or POI icon that represents your destination.
Smart 2005 for Pocket PC | User Manual 11. Trip Planner Use the Trip Planner to set multiple destination points for your trip. Smart will calculate a route via each point, in the specified order. Destination points can be added via the Trip Planner screen or by selecting Add To Trip from the Pop-up menu. You can save up to 14 destination points per trip. Trip Planner Icons At the bottom of each Trip Planner screen, a variable selection of icons displays: Tap To... Return to the previous screen.
Smart 2005 for Pocket PC | User Manual Adding a Destination Point via Address 1. Tap Address. The Destination Address screen will open. 2. Select a country from the Country drop-down box. 3. Type and select the destination address: Box Action Postcode • Tap the Postcode box. The Destination Address - Postcode screen will display. • Type up to five characters of the postcode in the Postcode box.
Smart 2005 for Pocket PC | User Manual Adding Destination Points via Other Options You may add destination points to the Trip Planner using the Intersection, Points of Interest, Favourites, Contact and Recent destinations options on the Destination menu. Managing the Trip Planner To manage destination points on the Trip Planner screen, tap and hold a destination point. The pop-up Trip Planner Menu will display. • To move a point up, select Move Up. • To move a point down, select Move Down.
Smart 2005 for Pocket PC | User Manual 12. Viewing your Route Once a route has been calculated, there are several ways to view it. Cycle through the screens by pressing the right 4-way toggle button. 2D Map Screen The 2D Map screen is always oriented north and shows your current position (if a GPS fix is active) and surrounding street names. If a route has been calculated, the route and all turns are highlighted.
Smart 2005 for Pocket PC | User Manual 3D Map Screen The 3D Map screen displays when a route is calculated, oriented to the travelling direction, with an adjustable horizon. To view the 3D Map screen when a route has been calculated, press the 4-way toggle cycle through the screens. • To display a smaller area in greater detail, press • To display a larger area in less detail, press to . . • Change the viewing angle using to decrease the angle and when the Information button is set to Angle.
Smart 2005 for Pocket PC | User Manual Next Instruction Screen The Next Instruction screen displays information that you need for the next turn, the direction of the turn and the distance to the turn. To view the Next Instruction screen, either press the 4-way toggle to cycle through the screens until the Next Instruction screen is displayed, or tap Map on the Main Menu. Direction of next turn. Tap to hear next instruction.
Smart 2005 for Pocket PC | User Manual Instruction List Screen The Instruction List screen displays a list of the remaining turns to your destination, the direction of the turn, the street name and the distance to the turn. Each distance shown in the righthand column represents the distance from your current location to that turn. The next turn is highlighted. To view the Instruction List screen, press the 4-way toggle the Instruction List screen is displayed.
Smart 2005 for Pocket PC | User Manual Turn List View Screen The Turn List View screen displays a map view of your next turn and a list of the remaining turns to your destination. Each distance shown in the instruction list column represents the distance from your current location to that turn. The next turn is highlighted. • To view the Turn List View screen tap Turn List View on the Main Menu. • Scroll up and down the list of instructions using the scroll bar.
Smart 2005 for Pocket PC | User Manual Viewing the Route Summary A summary of the calculated route can be displayed on the 2D Map or 3D Map screen for five seconds. The route summary includes: • Departure street. • Destination street. • Distance of route. • Time to go to destination (TTG). • Distance to go to destination (DTG). • Percentage of route completed (measured by distance). To display the route summary: 1. Tap and hold the 2D Map or 3D Map screen. 2. Select Route Summary from the Pop-up menu.
Smart 2005 for Pocket PC | User Manual 13. Map Screen Pop-up Menu The Pop-up menu is displayed from the 2D Map or 3D Map screen by tapping and holding a point on the screen. Location Menu Option Description Location Displays the name of the selected road, POI, Favourite or Quick Nav. Select to display the location summary. Set as departure Sets the selected point as your departure point. Navigate to Sets the selected point as your destination point.
Smart 2005 for Pocket PC | User Manual 14. Avoiding an Area Smart enables a route to be calculated that avoids a specified area on the map. Up to ten Avoid Areas can be added per route. Avoid Areas are displayed as shaded areas. Adding an Avoid Area 1. From the Main Menu, tap Map. The 2D Map screen will open. 2. Tap and hold the area that you want to avoid. 3. Select Add Avoid Area from the Pop-up menu. An Avoid Area is displayed. 4. Set the Avoid Area to the correct size and position.
Smart 2005 for Pocket PC | User Manual 15. Route Demonstrator The Route Demonstrator allows you to: • Preview a route. • Plan and view a route without a GPS fix, such as when you are inside a building. Step 1. Select Departure Point If you have a GPS fix, you do not need to select a departure point unless the demonstrated route’s departure point is not your current location. 1. Find your departure point by scrolling the map with the stylus. 2.
Smart 2005 for Pocket PC | User Manual 16. Trip Meter Trip Meter - Current Route Screen The Trip Meter - Current Route screen is used to view the distance travelled, average speed, maximum speed, time taken and stationary time for your current trip. • From the Main Menu, tap , then Trip Meter. The Trip Meter - Totals screen is used to view the distance travelled, average speed, maximum speed, time taken and stationary time for all of your trips to date, or since the trip meter was last reset.
Smart 2005 for Pocket PC | User Manual 17. Favourites and Quick Navs Favourites are used to access frequently used destinations without having to reenter information. Favourites are accessed from the Favourite List screen. You are able to save your three most frequently used Favourites as Quick Navs. Using a Quick Nav is the quickest and easiest way to set your destination. Quick Navs are accessed from the Quick Nav screen, or from the Pop-up menu on the 2D Map or 3D Map screens. Saving a Favourite 1.
Smart 2005 for Pocket PC | User Manual 3. Tap . The Favourite Edit screen will display. 4. In the Name box, type a name for the Quick Nav or Favourite. 5. To change the icon displayed on the 2D Map and 3D Map screen: a. Tap the Change Icon icon. The Favourite Change Icon screen will display. b. Tap the icon you want for the Quick Nav or Favourite. 6. Tap to save the Quick Nav or Favourite. The Favourite List screen will open. Using Quick Navs 1. From the Main Menu, tap Quick Nav. 2.
Smart 2005 for Pocket PC | User Manual 18. Settings You can modify the following settings to suit your preferences: Display Settings 1. From the Main Menu, tap , then Setup, then the Display tab. The Display Settings screen will open. 2. Modify the settings as required: If you want to... Then... improve screen contrast in light or dark conditions select either Day or Night in the Map Colours section.
Smart 2005 for Pocket PC | User Manual Guidance Settings 1. From the Main Menu, tap , then Setup, then the Guidance tab. The Guidance screen will open. 2. Modify the settings as required: • To enable voice guidance during navigation, select the Voice Instructions check box in the Voice Instructions section. • To change the voice scheme used for voice guidance during navigation, select your preferred voice scheme from the Voice Scheme drop-down box in the Voice Instructions section.
Smart 2005 for Pocket PC | User Manual To finish recording a route 1. From the Main Menu, tap Setup, then the Guidance tab. The Guidance screen will open. 2. Tap Stop in the Route Recording section, to stop recording the route. 3. Tap . The 2D Map screen will open. To play a route recording 1. From the Main Menu, tap , then Setup, then the Guidance tab. The Guidance screen will open. 2. In the Route Recording section, tap Play. The Open screen will open. 3.
Smart 2005 for Pocket PC | User Manual Route Settings 1. From the Main Menu, tap , Setup, then the Routing tab. The Routing screen will open. 2. Modify the settings as required: If you want to... Then... change the Route Type move the Route slider towards Quickest for Smart to give more weighting to the fastest time when calculating a route. move the Route slider towards Shortest for Smart to give more weighting to the shortest distance when calculating a route.
Smart 2005 for Pocket PC | User Manual Points of Interest (POI) Settings Points Of Interest (POIs) in a region are grouped into categories. This function allows you to select the category of POI that you need. For example, you may be interested in entertainment venues only and want to disable other POI categories, such as schools. 1. From the Main Menu, tap The POI screen will open. , then Setup, then the POI tab. 2.
Smart 2005 for Pocket PC | User Manual 3. Select or clear the appropriate check boxes until only those maps that you would like to use are selected. 4. If you have access to more than one memory location, go to step 2 and select another location. 5. Tap to accept these changes. The 2D Map screen will open. General Settings The General screen allows you to export your Favourites to a comma-delimited (.csv) file. Commadelimited files can be accessed by most database systems.
Smart 2005 for Pocket PC | User Manual 2. Modify the settings as required: • Move the Volume slider to the right to increase volume; move the Volume slider to the left to decrease volume. Tap Test to test the volume. • To enable an audible warning when travelling over a specified speed, select the Speed Warning check box. Select the speed over which the warning is to sound. • To enable an audible chime when Back-on-Track™ Automatic Rerouting is activated, select the Reroute Chime check box.
Smart 2005 for Pocket PC | User Manual 19. Smart Desktop Advanced Features Find a City or Town To search for a city or town to verify the map region to be installed: 1. From the Map menu, click Find City. The Find City window will open. 2. Type the name of the City or Town in the City Name box. The list of available cities will reduce to match your search. 3. Double-click the name of the city or town. The Map Display will rotate to centre on the selected city or town and or town location.
Smart 2005 for Pocket PC | User Manual Map Colours and Textures To access the Desktop Colours section: Desktop tab Settings Colours. Adjust the settings to change the look of the map type. Colour Settings Description Controls map colours. Displays the: • map border colour • map colour • map border width. Adjusts the map border width. Controls the map display: • solid colour, • no colour, • crosshatch texture. Controls geographic features displayed on the map.
Smart 2005 for Pocket PC | User Manual Points of Interest (POI) Editor You can create custom Points of Interest (POIs) using the POI Editor in two ways: • by creating your own POI files, or • by using compatible POI files downloaded from the Internet. A maximum of 25 Custom POI files can be saved on your Pocket PC. The Custom POI files are listed on the My POI screen. Custom POIs can be set to enable a warning chime or visual warning when in close proximity at the Select Active POI screen.
Smart 2005 for Pocket PC | User Manual • On the POI Editor window File menu, click Open Text File. The Open dialogue box will open. • Select the POI file from your local or network drive, then click Open. 3. Complete Saving a Custom POI File to your Pocket PC below. Saving a Custom POI File to your Pocket PC 1. On the Smart Desktop Map menu, click Points of Interest. The POI Editor window will open. 2. On the POI Editor window File menu, click Save to Device. The POI Options window will open. 3.
Smart 2005 for Pocket PC | User Manual 4. Click OK and follow the prompts. The POI file is saved to the Pocket PC as a Custom POI type. • If you want to change the file name, edit the file name in the POI File Name window File Name box, then click OK. The file name can be up to eight characters and cannot contain spaces. Deleting a Custom POI File from your Pocket PC 1. On the Map menu, click Points of Interest. The POI Editor window will open. 2. On the File menu, click Manage POI Files.
Smart 2005 for Pocket PC | User Manual 20. Continuous Continental Navigation Basemaps allow you to seamlessly navigate between installed maps without installing maps of all regions along your route. Each Basemap covers a large area, such as Western Europe or continental United States and contains main roads that connect cities and towns. On the Basemap, you can select a road or POI as your departure point or destination.
Smart 2005 for Pocket PC | User Manual Remove Basemap 1. Connect the Pocket PC to your computer. • Connect your Pocket PC to your computer via Microsoft ActiveSync 3.5 or higher. • Close all open programs on your Pocket PC. 2. Open Smart Desktop if it is not already open: Start Programs Navman Smart Desktop 2005 forPocket PC 3. On the Map menu, click Basemaps. The Basemap Installer window will open. 4. Select the Basemap to remove and click Remove.
Smart 2005 for Pocket PC | User Manual 21. Improving Performance Smart requires an amount of allocated program memory equal to about 10% of the size of the installed and active maps. Without enough allocated memory, you may receive an Out of Memory error. Reducing Number of Active Maps Smart uses program memory to store maps, so we recommend that you only specify the map or maps that you currently require.
Smart 2005 for Pocket PC | User Manual 22. Accessories These Pocket PC accessories are available for separate purchase from your local Navman retailer: In-Vehicle Power Adaptor 12 V in-vehicle power adaptor with 2 m power cable Universal PDA Mounting Kit Mounts any PDA device in your car.
Smart 2005 for Pocket PC | User Manual Appendix: Street Types Note: Belgium and Switzerland each list street types and their abbreviations in three languages. Country Street Type Abbreviation Austria BOULEVARD CHAUSSEE PLATZ STRASSE BVD CH PL STR Belgium (Dutch) BAAN BERG DREEF LAAN MARKT PARK PLEIN SQUARE STEENWEG STRAAT BN BG DR LN MKT PK PL SQ STWG STR Belgium (French) AVENUE BOULEVARD CHAUSSÉE IMPASSE MONT MONTAGNE PLACE ROUTE ROUTE NATIONAL RUE SQUARE AVE BVD CH IMP MT MT PL RTE RN R.
Smart 2005 for Pocket PC | User Manual Country Street Type Abbreviation Germany BOULEVARD CHAUSSEE PLATZ STRASSE BVD CH PL STR Ireland AVENUE BOULEVARD CENTRE CRESCENT PLACE ROAD ROUTE SQUARE STREET YARD AVE BVD CTR CR PL RD RTE SQ ST YD Italy CONTRADA CORSO FRAZIONE LARGO PIAZZA PIAZZALE STRADA STATALE SUPERSTRADA VIA VIALE C.DA C.SO FR LGO P.ZA P.LE SS SS V.
Smart 2005 for Pocket PC | User Manual Country Street Type Abbreviation Norway GATA GATE PLASSEN VEGEN VEI GT GT PL V. V. Portugal AVENIDA BAIRRO CALÇADA CAMINHO ESTRADA LARGO LARGUINHO PRAÇA QUARTO QUARTA QUINTA RUA SÃO SANTA SANTO AVE BA CC CAM EST LGO LARG PR QT QT QU R. S. S. S. Spain AVENIDA CALLE CALLEJÓN CAMINO CARRETERA GLORIETA PASEO PLAZA RAMBLA RONDA AVE C/ CJ CM CR G P.O P.
Smart 2005 for Pocket PC | User Manual Support Information Support for Australia: Support for Europe: Navman Australia Pty. Ltd PO Box 479 Gladesville NSW 2111 Australia Navman Europe Limited 4G Gatwick House Peeks Brook Lane Horley, Surrey RH6 9ST United Kingdom pcnsupport.aus@navman.com www.navman.com support@navman-europe.com www.navman-europe.com Support for New Zealand: Support for the US and Canada: Navman NZ Ltd PO Box.
Smart 2005 for Pocket PC | User Manual Notes 65
Smart 2005 for Pocket PC | User Manual Notes 66
MN000416A
