Operation Manual

27
TRACKER 5430/5430i Installation and Operation Manual
NAVMAN
Setup menu map, with factory default settings in brackets
System Language (English)
Rotation (North up) Backlight
Projected course (Off ) Keybeep (On)
CDI scale (0.1 nm) Factory reset
Chart Plotter mode (Off )
Map datum (WGS84)
NMEA datum off set (Off )
Map shift (None)
Waypoints (Selected)
Anticlutter (Off )
Lat.Lon Grid (Off )
Boundaries (On) Bathymetric Lines (On)
Names (On) Spot soundings (On)
Attention Areas (On) Bath & Sndgs Min: (0 m)
Water Features (On) Bath & Sndgs Max: (15 m)
Water depth
Lights (On)
Nav-Aids (Int)
Land Features (On)
GPS GPS source (Internal)
Tank full DGPS Source (None)
Set remaining (0) Restart GPS
Clear Used Static Navigation (Off )
Fuel Tank size (0) Speed Filter: (5)
Num Engines (0) Course Filter: (4)
Fuel cal
Flow fi lter (5)
Track Record (1)
Reset trip dist Display (1)
Logs Reset total dist Plotting Interval (Distance)
Trip dist Distance (0.1 nm)
Total dist Time (10 seconds)
Memory used
Arrival radius (Off ) Delete track
Anchor alarm (Off )
Alarms XTE (Off ) Distance (nm)
Danger (Off ) Speed (kn)
Low fuel (Off ) Depth (fa)
DGPS (On) Fuel (litres)
Units Compass (°M)
NMEA out Temperature (°C)
NMEA data Wind (true)
Comms Lat/Lon d.p’s (3)
NavBus (Off )
NavBus group (0) Local off set (0)
Time Time format (24 hour)
Simulate (Off ) Date format (dd/MMM/yy)
Mode (Normal)
Simulate Speed (1 kn)
Heading (0°M)
Route
Setup menu