Operation Manual

28
TRACKER 5430/5430i Installation and Operation Manual
NAVMAN
13-2 Chart setup
Rotation
The options for chart rotation are:
North up: North is always at the top of the
chart display.
Track up: The chart is rotated so that the
boat direction is to the top of the display.
This option is useful for navigating narrow
harbours or rivers. The TRACKER asks for a
course deviation; this is how much the boat
direction needs to change to make the chart
redraw.
Tip: If the chart redraws too
frequently, increase the course deviation
setting.
Course up: This option is only available if the
boat is navigating to a destination. The chart
is rotated so that the plotted course to the
destination is vertical.
Projected course
The TRACKER can estimate the course after a
given time, based on the current speed and
heading (see section 3-4). The options are 2
minutes, 10 minutes, 30 minutes, 1 hour, 2 hours
or Off.
CDI Scale
The CDI Scale is described in appendix C, CDI.
The options are 0.05, 0.1, 0.2, 0.5, 1.0, 2.0, 4.0 and
10.0 distance units.
Plotter mode
Occasionally it is desirable to use a chart scale
which is not available on a chart card. Examples
are:
To zoom in to a small scale to track very small
boat movements.
If there is no detailed chart for an area, for
example when crossing an ocean.
If Plotter mode is On, then if the chart zooms to
a scale which is not available, the TRACKER will
enter plotter mode and will only display the boat
position and track (if enabled). Chart and map
information will no longer be displayed and the
display is white with black crosshatch lines.
For normal use, turn Plotter mode to Off.
Language
Select the language for the displays. The options
are English, Italian, French, German, Spanish,
Dutch, Swedish, Portuguese Finnish and Greek.
Backlight
Select the backlight intensity and the LCD
contrast levels.
To change the default settings:
i Press
or to
select between Backlight and Contrast.
ii Press
or to select the desired level.
iii Press ENT
Keybeep
Enable or disable the beep when a key is pressed.
13-1 System setup
Factory reset
Resets all the TRACKER setup menu data back
to the factory default settings as shown on the
setup menu map. Any waypoints, routes or tracks
are not deleted.
After the reset, the TRACKER displays an
installation menu of setup data:
1 Select the language to use.
2 Change the setup data if necessary:
i Select the data item to change.
ii Use the cursor keys to change the data.
iii Press ENT.
3 When the setup data is correct, press ESC.