Quick Start Guide

VHF 7110 Quick Start Guide
4
NAVMAN
Volume and Power
Base Unit
• Turn the VOL knob clockwise to
power on.
• Continue to turn until a
comfortable volume is reached on
the base speaker.
Note: this switch controls the power to
both the base unit and second station
handset.
Handset
You can adjust the volume on your
handset with the VOL
and keys
on the righthand side of the handset.
Hold down VOL or to rapidly
increase or decrease the volume or
press quickly to step through the eight
(8) different volume levels.
This will not change the volume on the
base speaker.
Squelch
Base Unit
• Turn the SQL knob fully
counterclockwise so that random
noise is heard.
• Turn SQL slowly clockwise until the
random noise disappears.
• Make another 1/4 turn clockwise
for best reception in normal open
sea conditions.
In areas of high noise (eg close to
large cities) reception may improve if
sensitivity is reduced. Try turning SQL
slowly clockwise or use the LOCAL
setting (see the Owner’s Manual).
Handset
You can also adjust the squelch with
the
and
keys on the handset.
Press
or
to step through the eight
(8) different squelch settings or hold
down to rapidly change the squelch.
The squelch setting on the base unit
will temporarily change to match.
When you put the handset back ON
hook, the base unit squelch setting
takes precedence again.