Quick Start Guide

VHF 7110 Quick Start Guide
9
NAVMAN
Scan/Stop Scanning a Favourite Channel
Base Unit and Handset
• Select the favourite channel.
• Press
SCAN
to scan the favourite
channel and the priority channel in
DUAL or TRI watch mode.
• Press
SCAN
again to stop.
SCAN
Scan all 3 Favourite Channels
Base Unit and Handset
• Press
3CH
.
• Hold down
SCAN
to scan all three
favourite channels and the priority
channel.
• Press
SCAN
again to stop.
3CH
SCAN
Delete a Favourite Channel
Base Unit and Handset
• Select the favourite channel.
• Hold down
3CH
until the setting
(CH1, CH2 or CH3) disappears off
the LCD.
3CH
Select ALL SCAN mode
Base Unit and Handset
• Hold down
SCAN
to start scanning
all channels (and the priority
channel every 1.8 seconds).
NOTE: In Europe, scanning
functions may be limited or
blocked in some countries.
When a signal is received, scanning
stops at that channel. Press
ENT
to skip over an ‘always busy’
channel and resume scanning.
• Press
SCAN
to stop at the current
channel.
SCAN