User's Manual

Page 12 of 12
5.2 Changing the IP Address
Once you are logged in it is then possible to change various details, such as the radar
sensor’s own IP address, its Subnet mask, the Gateway IP address and/or the NTP
(Network Time Protocol - where the sensor should derive its time information) address.
To change IP details
1. Login to Vertex, as described above.
2. Click on the System Configuration button on the left side to display the following
page:
3. As required, change the IP Address, Subnet Mask, Gateway and/or NTP Address to
suit the installation and then click the blue Apply button in the lower right corner.
4. Click the green Commit Changes button to save the settings to the sensor memory.
A message will be displayed when this action has been carried out.
5. Click the red Action button at the top of the page and then click the Reboot option to
restart the radar sensor.