Instruction Manual 7″ DUAL SCREEN TFT LCD MULTIMEDIA ENTERTAINMENT SYSTEM MODEL NO.: NCV-813 BEFORE USING THIS PRODUCT, READ, UNDERSTAND, AND FOLLOW THESE INSTRUCTIONS. Save this booklet for future reference.
SAFETY INFORMATION CAUTION: DVD/VIDEO CD/CD PLAYER IS A CLASS 1 LASER PRODUCT. HOWEVER THIS DVD/ VIDEO, CD/CD PLAYER USES A VISIBLE LASER BEAM WHICH COULD CAUSE HAZARDOUS RADIATION EXPO SURE IF DIRECTED. BE SURE TO OPERATE THE DVD/VIDEO CD/CD PLAYER CORRECTLY AS INSTRUCTED. WHEN THIS DVD/VIDEO CD/CD PLAYER IS PLUGGED TO THE WALL OUTLET, DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO THE INSIDE OF THIS PLAYER.
Read all instructions before using • • • • • • • • • • Do not use this product near water. Do not ceiling- or wall-mount the product. Install the product in accordance with the operating instructions. Do not set the product near heat sources, such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. Protect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and the point where they exit the product.
Table of contents Getting Started: Safety information ........................................................................................................................1-2 Features ..........................................................................................................................................4 Accessories ................................................................................................................................4 Control reference guide ...................
Features 7" TFT DISPLAY This player has a built-in 7" TFT display window, to provide clear vision, and low radiation. BUILT IN RECHARGEABLE LITHIUM BATTERY MULTI TV SYSTEM SUPPORT The player can play discs with signal system of PAL and NTSC.
Control reference guide Main unit 1 TFT Display window - Displays all information about DVD work scene. 2 Built-in speakers 3 PREV button - Press this button to skip to the previous chapter or title (for DVD) or track (for VCD/ CD). 4 NEXT button - Press this button to skip to the next chapter or title (for DVD) or track (for VCD/ CD). 5 Remote control sensor 6 LEFT navigation button - Press this button to move left. 7 UP navigation button - Press this button to move up.
Control reference guide Remote control 1. TFT MODE button- Press this button to select BRIGHTNESS, CONTRAST, SHARPNESS, SATURATION, HUE or 16:9/4:3 screen mode and then press left or right button to adjust as you like. 2. NUMERIC buttons- Press these buttons to input numeric information, such as track number, chapter number and so on. 3. FR button- Press this button to play the disc backward at speeds:x2,x4,x8,x16,x32. 4. FF button- Press this button to play the disc forward at speeds: x2,x4,x8,x16,x32. 5.
Basic connection l l Ensure all the cables are disconnected from the main unit before connecting to AC power source by AC power adaptor. Read through the instructions before connecting other equipment. Connecting to AC power source Rechargeable Battery Use The player has a built-in rechargeable lithium battery. 1.Charge the battery - Connect the adaptor to the DC 12V IN jack, then set the unit in POWER ON mode (THE PLAYING MODE) to be fully charged or set in POWER OFF mode to be fully charged.
Connecting to monitor 1. Monitor Unit FRONT VIEW 1. MUTE button-Press this button to mute the sound. 2. MENU button- Press it to enter initial settings menu. Press this button continuously to select CONTRAST, BRIGHTNESS, HUE, SATURATION, SHARPNESS and SCALING and then press left or right button to adjust as you like. 3. LEFT button-Press it to move left to reduce the level of different OSD item in OSD menu mode. 4.
2.Connecting to AC power source 3.
Connecting to TV set l l l l l It is recommended to connect a multi-system TV. Disconnect the AC adaptor before commencing connection. Do not block ventilation holes of equipment and arrange them so that air can circulate freely. Read through the instructions before connecting other equipment. Ensure that you observe the color coding when connecting audio and video cables. Note: During DVD play, the TV volume may be at a lower level than during TV broadcasts, etc.
Connecting to audio equipment Connect Headphones 1. Connect the Headphones. Adjust the volume to minimize the volume. Connect the headphones to phone jack. 2. Adjust the Volume to the level that you want.
Remote control preparation Battery installation Insert the battery while observing the correct (+) and (-) polarities as illustrated at right. Service life of battery l The battery normally last for about one year although this depends on how often, and for what operations, the remote control is used. l If the remote control fails to work even when it is operated near the player, replace the batteries. l Use one type CR2025 battery. NOTE: l Do not use rechargeable (Ni-Cd) battery.
Before enjoying DVD/Video CD/CD The on-screen menu language of your player has been factory pre-set to English. If you want to change the menu language to other language, please refer to "Initial settings / General setup / OSD LANGUAGE". In the explanation below it is assumed that English has been selected as menu language. Basic play 1. Switch on the POWER to the “ON” position at the right side of the player to turn on the player. NOTE: 1).
Stopping play Press the STOP button to stop playing a disc. NOTE: When player is stopped, the player records the point where STOP was pressed (RESUME function). Press the PLAY/PAUSE button again, playback will resume from this point . When the disc door is opened or the STOP button is pressed again, the RESUME function will be cleared. Skipping ahead or back Skipping ahead Press NEXT button during play A chapter (DVD) or a track (Video CD/CD) is skipped each time the button is pressed.
Slow-motion play (DVD/VCD) Press the SLOW button on the remote control during playback. 1) Plays the disc at a 1/2 of normal speed at first. Each time the button is pressed, the play Speed becomes 1/2,1/4,1/8,1/16. 2) Press the PLAY/PAUSE button to resume to normal play. Music playback 1. Insert the disc containing the files with music to be played and after a few seconds, the screen of the monitor will show all the folders on the disc: 2.
Movie playback 1.Insert the disc containing the files with movie to be played and after a few seconds, the screen of the monitor will show all the folders on the disc: 2. Select the folder you want to play by the navigation buttons and press the ENTER button to confirm. 3. The files in this folder are displayed and select the desired file by navigation buttons, then press the PLAY/PAUSE button to start playback. 4. Press the NEXT or PREV button play the next or previous file. 5.
JPEG CD l For JPEG picture CD, select the folder you want to play by the navigation buttons and press ENTER button to confirm. l The files in this folder are displayed and select your pictures by using the up/down navigation buttons and press ENTER button to start playback. Thumbnail of picture will be displayed while you scrolling across the file name. Flipping pictures l Press UP navigation button to flip the picture vertically. l Press DOWN navigation button to flip the picture horizontally.
JPEG CD Slide show effects Press PROGRAM button to select one of the effects when changing from one picture to another: 1 Wipe Top 2 Wipe Bottom 3 Wipe Left 4 Wipe Right 5 Diagonal Wipe Left Top 6 Diagonal Wipe Right Top 7 Diagonal Wipe Left Bottom 8 Diagonal Wipe Right Bottom 9 Extend From Centre H 10 Extend From Centre V 11 Compress To Center H 12 Compress To Center V 13 Window H 14 Window V 15 Wipe From Edge To Centre 16 Move In Form Top 17 None Enjoying Video CD with playback control 1.
USB Playback 1. Insert USB containing the files in VCD/SVCD/DVD/ MUSIC/WMA/MOVIE/JPEG /CD format to be played. 2. Press USB/CARD/DVD button to switch the unit in USB reader mode. Then the screen will display as following: 3. After several seconds, all the folders in the USB will display on monitor screen: 4. Select a folder you want to play using the navigation buttons and press the ENTER button to confirm. 5.
CARD Playback 1. Insert the CARD (SD/MMC) containing the files in VCD/SVCD/DVD/MUSIC/WMA/ MOVIE/JPEG /CD format to be played. 2. Press USB/CARD/DVD button to switch the unit in CARD reader mode. 3. After several seconds, all the folders in the CARD will display on monitor screen: 4. Select a folder you want to play by using the navigation buttons and press the ENTER button to confirm. 5.
On screen display Information Press OSD button to display playing information. Program play The player plays the files in an desired order. 1. Press PROGRAM button and the screen will display the program menu. 2. Press navigation buttons to choose memory index and then press ENTER button to start input. Enter desire titles/chapters numbers by using the numeric buttons. The selected titles/ chapters are stored into the memory. Select NEXT on the menu to see the next page. Up to 20 memories can be stored.
Repeat play Press REPEAT button during play, it will repeat play one chapter or one title (for DVD disc), or repeat play track (for VCD/CD). A-B repeat play Repeating sections between two specific points (A-B repeat) 1. Press A-B REPEAT button during play at the point where repeat play is to be started (A). 2. Press A-B REPEAT button at the point where repeat play is to be ended (B). Repeat play of the selection between points A and B starts. 3. Press A-B REPEAT button once again to return normal play.
Changing subtitle language (DVD only) It is possible to change the subtitle language to a different language from the one selected at the initial settings. (This operation works only with discs on which multiple subtitle languages are recorded ) 1. Press SUBTITLE button during play, the screen will display the current language. 2. Press SUBTITLE button again to change language or turn off. NOTE: When no subtitles are recorded, press this button will not work.
Viewing from different angle (DVD only) Some DVDs may contain scenes which have been shot simultaneously from a number of different angles. For these discs, the same scene can be viewed from each of these different angles using the ANGLE button. Press ANGLE during play, number of angle being played will be displayed in the screen, press the button to change to different angles.
1. GENERAL SET UP 1.1 TV TYPE - It is for selecting the TV system according to the colour system of the TV. Options: PAL NTSC 1.2 TV DISPLAY - It is for selecting TV output mode. Options: Normal /PS: Pan & scan mode Normal/ LB: Letter box mode Wide : 16:9 wide screen mode 1.3 ANGLE MARK - It is used to select whether or not the multi- angle icon is display on screen when a Multi-angle DVD disc is playing. Options: On: Icon will be displayed Off: Icon will be turned off 1.
2. AUDIO SETUP 2.1 SPEAKER SETUP - It is used to set the speaker Output levels Options: LT/RT-Left/Right mix mode STEREO - Select this option if you don't have a 2.1 channel amplifier. SURROUND- It is used to set dummy surrounding audio effectiveness. 2.2 EQUALIZER - It is used to compensate for frequency distortion to improve its frequency response in audio systems (not applicable).
Definition of terms DVD This refers to a high-density optical disc on which high-quality pictures and sound have been obtained by means of digital signals. Incorporation a new video compression technology (MPEG II) and high-density recording technology, DVD enables aesthetically pleasing full-motion video to be recorded over long periods of time (for instance, a whole movie can be recorded). DVD has a structure consisting of two 0.6 mm thin discs which are adhered to each other.
Specifications Power requirements : Power consumption (main unit): Signal system: Resolution: Dots Distance: Visible Range: Discs played: (1) DVD-VIDEO disc 12 cm single-sided, single-layer 12 cm single-sided, dual-layer 12 cm double-sided, single-layer 8 cm single-sided, single-layer 8 cm single-sided, dual-layer 8 cm double-sided, single-layer (2) Compact disc (VIDEO CD) 12 cm disc 8 cm disc Video output level: Audio output level: Earphone output level: Pickup: Wave length: Laser power: Measurement (main
Troubleshooting Before requesting service for this player, check the chart below for a possible cause of the problem you are experiencing. Some simple checks or an adjustment on your part may eliminate the problem and restore proper operation. Symptom(Common) No power. l Play fails to start even when PLAY is pressed. l Play starts but then stops immediately. No picture. l No sound. l Distorted sound. Picture is distorted during rapid advance or rapid reverse.
Troubleshooting (Continued) The password for rating level has been forgotten. Symptom [Video CD] No menu play. Please contact your local sales dealer. Remedy This function works only for Video CDs with playback control. DISC handling and maintenance Handling precautions l Hold the disc by the edges so the surface will not be soiled with fingerprints. Fingerprints, dirt and scratches can cause skipping and distortion. l Do not write on the label side with a ball-point pen or other writing utensils.