-1-
DVD PLAYER IMPORTANT SAFETY INSTRUCTIONS 13. NONUSE PERIODS - The power cord of the product should be unplugged from the outlet when left unused for long periods of time. 19. SERVICING - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 14.
DVD PLAYER IMPORTANT SAFETY INSTRUCTIONS To protect intellectual property, the involved organizations partition the world into six regions, each of which can only use the DVD player and DVD disc with the given regional code. The illustration on the right shows symbols of the six regions. One DVD player with a given regional code cannot play disc of another regional code. The partition of regional codes is shown as follows: 1. Canada, USA; 1 2 3 4 5 2. Japan, Europe, South Africa, Middle East 3.
DVD PLAYER Please read the user manual carefully before connection or operation TABLE OF CONTENT Important Safety Features Precautions Accessories Front Panel Rear Panel Speaker Control Remote Control Basic Connection Remote Control Preparation Operations Preparation Play Stop Prev/Next FB/FF Slow Step Number(0-9,10+) button Mute VOL+/VOLRandom OSD Zoom A-B Repeat Repeat Angle Audio Program PBC TIME Title/Chapter search Menu Subtitle Video DVD/USB Clear Setup Reference(Menu/Submenu/Options) Handing Precau
DVD PLAYER FEATURES DVD - A completely new dimension in video entertainment Subtitles may be displayed in one of a maximum of 32 languages available (multi-subtitles DVD only). Audio soundtrack can be heard in up to 8 languages (multi-languages DVD only). Multi-angle function allows you to choose the viewing angles of scene (for DVD with multiple camera angles only). Other convenient features A full function remote control provides quick access to DVD functions.
DVD PLAYER ACCESSORIES (Please check whether all the following accessories are available after unpacking.) Instruction Manual DVD/USB PBC CLEAR TIME ND-854 Video/Audio cord Remote control FRONT PANEL ND-854 2 1 1. Disc tray 2. OPEN/CLOSE button 3. Play/Pause key 4. Stop key 5.Power switch key 6.Remote control sensor 3 4 5 6 7 7.USB REAR PANEL 7 3 1 2 6 5 4 1. Right audio output jack 2. Video output 3.Left audio output jack 4. S-video output jack 5.AC power cord 6.
DVD PLAYER Speaker Control 1 . FRONT panel : Master volume control 2.
REMOTE CONTROL 16 1 1. Open/Close button 2. 0-9/10+ button 3. Menu button 4. Move ▲▼◄►/ Enter 5. Prev/Next button 6. Fast reverse/Fast forward button 7. OSD button 8. Subtitle button 9. DVD/USB button 10. Angle button 11. Zoom button 12. Repeat button 13. A-B button 14. Program button 15. Clear button 16. Power button 17. Vol+/ - button 18. Mute button 19. Setup button 20. Play/Pause button 21. Title button 22. Audio button 23. Stop button 24. Video button 25. PBC button 26. Step button 27.
DVD PLAYER BASIC CONNECTION Ensure that the power switch of this unit and other equipment to be connected is turned off before commencing connection. Read through the instructions before connecting other equipment. Ensure that you observe the colour-coding when connecting audio and video cords. A: Connecting to a TV with an AV Cable or S-VIDEO Cable 1. TV set (optional) 2. DVD/CD player 3. DVD/CD player Video, R/L audio Output Jack 4. To TV Audio, Video input connection 5.
DVD PLAYER BASIC CONNECTION B: Connecting to a TV with an AV Cable and Y/ Pb/Cb/ Pr/Cr Cable. 1. TV set (optional) 2. DVD/CD player 3. DVD/CD player audio Output Jack 4. To TV set audio input Jack 5. DVD/CD player (Y/ Pb/Cb/ Pr/Cr) Video Output Jack 6. To TV set (Y/ Pb/Cb/ Pr/Cr) Video input Jack Note: Audio Left = white, Audio Right = red. The yellow cable do not input.
DVD PLAYER BASIC CONNECTION C: Connection to speaker 1. TV set (optional) 2. DVD/CD player 3. DVD/CD player audio Output Jack 4. DVD/CD player Video Output Jack( The white and red cable do not input). 5. The main speaker Audio Input Jack 6. To TV Video input connection ( The white and red cable do not input). 7. The main speaker Audio Output Jack 8.
DVD PLAYER BASIC CONNECTION D: Connecting to an Audio Receiver with a Coaxial Cable 1. TV set (optional) 2. DVD/CD player 3. DVD/CD player Video Output Jack( The white and red cable do not input). 4. To TV set Video input Jack( The white and red cable do not input). 5. DVD/CD player Coaxial Output Jack 7.
DVD PLAYER REMOTE CONTROL PREPARATION Battery Installation Insert the batteries while observing the positive (+) and Negative (-) polarities as Figure A. Service life of batteries The batteries normally last for a year although this depends on the operation and on how often the remote control is used. If the remote control unit fails to work even when it is operated near the player, replace the batteries with new ones. Use size AAA UM-4 batteries (2 pieces).
DVD PLAYER OPERATION PREPARATION BEFORE PLAYING DISC The option of display language catalogue is preset to English. Please refer to Setup operation Most functions are operated by remote control. Either operation of remote control of front panel is effective when their buttons indicate the same function. Preparation Turn the TV on and select AV as the TV input. Switch on the related system power if the player has been connected to amplifier equipment etc. PLAY/PAUSE 1. Connect AC power cord to AC outlet. 2.
DVD PLAYER OPERATION MUTE Press MUTE button during play, the player shows mute and there is no audio output (silence), press again to cancel MUTE. VOL+/VOLPress VOL+/VOL- button play may change volume for audio output. RANDOM Press to select a random chapter. OSD Press OSD button during play to show the disc s relevant information on TV screen(such as playing time, chapter number, playback status). ZOOM Zoom function can only be operated in JPEG disc and VCD/DVD format disc.
DVD PLAYER OPERATION TIME In the play, you press TIME button on the remote control. You can search the disc based on its title/ chapter/track as shown in the figure. Press TIME button, a search menu will display. Use or button to select the search item/time/titel/chapter. The selected will be shown in highlight. Use number button to select the search item/time/title/chapter, and press ENTER button to play. For example: Time search: To search 16 min 50 secretary: input 1,6,5 and0.
DVD PLAYER SETUP SETUP Once the initial settings have been completed, the player can always be operated under the same conditions (especially with DVD discs). The settings will be retained in the memory even after turning off the power until the settings are changed. We set the initial language to English when the player is out of factory. You may change the language into that you preferred. Operation 1.
DVD PLAYER REFERENCE Menu, Submenu and Options MENU SUBMENU OSD MENU LANGUAGE SETUP Audio Subtitle OPTIONS English French Geman Spanish English French Geman Spanish others English French Geman Spanish others English French Geman Spanish others Off -18- DESCRIPTION English On Screen Display French On Screen Display Geman On Screen Display Spanish On Screen Display English On Screen Display French On Screen Display Geman On Screen Display Spanish On Screen Display English On Screen Display French On
DVD PLAYER REFERENCE MENU SCREEN SETUP SUBMENU OPTIONS TV Type 4:3 PS 4:3 LB 16:9 Set TV screen at 4:3 Pan Scan Set TV at screen 4:3 Letter Box Set TV at screen 16:9 Screen Saver On Off Set screen saver to ON or OFF.
DVD PLAYER REFERENCE Definition of terms Angle Recorded onto some DVD discs are scenes which have been simultaneously shot from a number of different angles (i.e. The same scene is shot from the from, left side and right side etc.). With such discs, the ANGLE button can be used to view the scene from different angles. Chapter Number These numbers are recorded on DVD discs, A title is subdivided into many sections.
DVD PLAYER TROUBLESHOOTING Check the chart below for a possible cause of the problem you are experiencing before requesting service for this unit, Some simple checks or minor adjustment on your part may eliminate the problem and restore proper operation. Let the technician maintain the unit. Keep away from static electricity properly before maintenance as loader, key IC are easy to be damaged by it.