User Manual 7" TFT LCD Display Portable DVD Player with Digital TV Tuner, AM/FM Stereo Radio & USB/SD/MMC Inputs Model: NDL-400 Before attempting to connect, operate or adjust this player, please read these instructions completely. And then put this manual in a safe place for future reference.
1
2
Illustration of the Controls/Jacks On the Main Unit 7 1 3 2 21 5 4 7 6 24 26 22 23 25 32 15 9 11 13 8 10 12 17 16 14 18 19 20 27 28 29 30 1. VOLUME CONTROL 2. PHONES JACK 3. MIC JACK 4. TV/DVD BUTTON 5. CH+/UP BUTTON 6. CH-/DOWN BUTTON 7. LCD SCREEN (CD DOOR IS INSIDE) 8. STOP&DVD/SD/USB BUTTON 9. PLAY/PAUSE BUTTON 10. CD DOOR OPEN AREA 11. PREVIOUS/FR/LEFT BUTTON 12. NEXT/FF/RIGHT BUTTON 13. TV MENU BUTTON 14. TUNING CONTROL 15. AUX IN JACK 16. USB PORT 17. SD/MMC CARD SLOT 31 18.
Remote control unit Connecting to a stereo TV set To power outlet 15 16 1 17 AC power cord 2 LR 18 3 To video input connector (yellow) To audio input connectors (red, white) 4 Video/audio cable 5 19 6 7 20 21 8 22 9 23 10 11 12 24 25 13 14 26 27 1. SCREEN OFF/ON button 2. MUTE button 3. P MODE button 4. GUIDE button 5. TV MENU button 6. REPEAT button 7. PLAY button 8. SUBTITLE button 9. AUDIO button 10. PAUSE/STEP button 11. ANGLE/PROGRAM button 12. ZOOM/SLOW button 13.
Note: Inputting leading zero is not necessary. Some figure inputs may be useless, because it's greater figure than total title/chapter /track number on the disc. Example: Track 3, press "3" Track 12, press "+10" and then "2" Track 21, press "+10" twice and then "1" 3. To start programmed playback, select PLAY on the menu; pressing PROGRAM button again to exit programming. 4. To clear all items, select the on the menu, and then press ENTER button on remote control. 5.
1. SYSTEM SETUP KODAK PICTURE CD / JPEG CD PLAYBACK Slide show of Kodak Picture CD after being loaded begins automatically; Folders of JPEG picture CD after being loaded are displayed on the TV screen; use the navigation buttons to select the desired folder and then press ENTER button to confirm. The files in this folder are displayed and you can select your favourable pictures using the up/down navigation buttons and press ENTER button to start playback.
4. SPEAKER SETUP TV OPERATIONS GET STARTED Be sure the TV antenna is connected to the set properly. Power on the unit. Slide FUNCTION button to TV/DVD position, and press TV/DVD button to switch to TV mode. Note: It is recommendable to scan channels first for the first time using or no channel broadcasts. Please follow the below steps to scan channels: 1. Press TV MENU to enter the TV setup menu, then use navigation buttons to select "AUTO SCAN" option, 2.
Picture Mode Contrast Brightness Sharpness Tint Color UP/DOWN 62 53 50 0 60 MENU:EXIT ADJUST UP/DOWN UP/DOWN English MENU:EXIT UP/DOWN Balance: it is used to adjust the balance effect according to your own favorite. Audio language: it is used to select the desired audio output language. OSD Duration Sleep Timer Time Zone Daylight Saving Time Clock UP/DOWN ADJUST ADJUST Antenna Auto Scan Show/Hide Channel No.
DISC HANDLING PRECAUTIONS Hold the disc by the edge so the surface will not be soiled with finger prints. Finger prints, dirt and scratches can cause skipping and distortion. Do not write on the label side with a ball-point pen or other writing utensils. Do not apply benzine, thinner, and liquid that prevents against static electricity. Be careful not to drop or bend the disc. Install only one disc on the disc tray. Do not try to close the disc tray when the disc is not in stalled properly.
