R DIGITAL AUDIO AND VIDEO PLAYER WITH 2.
Table of Contents Precautions Basic Features Basic Operation 1 3 3 4 System Configuration Power On Power Off Volume Adjustment Connection to PC and Data Exchange Charging Low Power File Storage How to use TF card How to insert and pull out TF card General Button /Icon Description 4 4 4 4 4 5 5 5 5 6 6 Main Menu Interface Music Mode 6 7 Music Interface Description Music Setting Interface Lyrics Display 7 7 8 Video Mode Picture mode Radio Mode 8 9 11 FM Recording Interface 12 Ebook Mode Camera Mod
Camera Setting Interface Video Camera Setting Interface Video Camera Interface PC Camera 14 15 16 16 Explorer Mode Application 16 17 Recorder Calendar Stopwatch Calculator Notebook Input Method 17 17 18 18 18 19 System Setting 19 Player Information Set Time Language Display Calibrate Power Off Setting Default Settings Upgrade Other Setting 20 20 20 20 20 20 21 21 21 Video Conversion Tool 21 Operating Platform What format can video files be recorded into What format can picture files be taken int
Precautions For the correct use and good performance of the player, the user must fully understand the manual as well as strictly follow the instructions provided. Avoid high temperature (above 35o C) or low temperature ( below -5o C). Never knock the main machine violently. Never contact with chemicals such as benzene, thinner etc. Do not close to strong magnetic field, electric field etc. Keep away from direct sunlight or heating appliances. Never privately dissemble, repair or modify the player.
ADFU restoration and USB upgrading mode enabled USB2.0 high speed transmission Basic Operation System Configuration OS: Windows XP/2K/ME/98 (driver installation needed) /Linux 9 and above /Mac OS 10 / Windows 7 CPU: Pentium-133MHz at least Memory: 32MB at least Hard disk free space, 100MB at least Video card: above 640*480, enhanced color at least (16 bits) Power On Slide the switch to On and the player will be powered on in 3 second. The player will prompt "Welcome" and then enter the main interface.
Connect the player to PC with the USB cable, and the player will enter U disk mode. Press MENU button or safely remove U disk, and the player will be under USB charging mode. In USB charging mode, touch the screen or press MENU to enter the main applications interface. Charging This player has high capacity lithium battery. For charging, connect the player to the USB port of the PC or to a charger.
opened. This player is compatible with maximum 8GB TF card. How to insert and pull out TF card How to insert: with the front (the side with characters) of the TF card up (towards the screen of the player), slightly push to insert into the card holder of the player to connect. After the card is inserted, the player can play the files in the TF card. How to pull out: slightly push the TF card and the TF card will partly come out, and then pull the card out.
bottom right corner or press and hold the MENU button to return to the main menu interface. Music Mode In the main interface, touch the Music icon to enter music mode. Music Interface Description Button /icon Description Number of the song being played / Total songs Playing mode Playing sequence Playing style Song playing progress bar. Drag the bar to adjust playing progress. Volume bar. Drag the bar to adjust volume.
an appropriate function. Icon Description Click Browser to enter different song lists main directory, card directory, all songs, ID3 list, play list, and tag list. Click Settings to choose SRS setting: WOW, WOWHD, USER Click USER to enter user setting interface. Drag the bar or chick the options to set the functions. Click OK to confirm the settings. EQ setting: click to enter User EQ setting interface, move up or down the bar to select sound effect, and click OK to confirm.
Directly click the video file on the screen to start playing the selected video. When play a video file, the up/down buttons and the progress bar will appear automatically by touching the screen. Button Description Browse: local directory, card directory, tag list Tag: directly click the icon and a box pops out and prompts tag saved . Play: click and it will change to pause button , and click again to continue playing. Touch it and the Volume bar will pop out at the bottom.
Click to change to the List mode. 2. Directly click the thumbnail to browse pictures. Click the picture, and the buttons will appear automatically at the bottom of the screen. Button Description Manual play: click the button, and the button will change to ,and click again to enter auto play mode. Main dir and card dir. return to upper directory to browse picture list.
Radio Mode 1.In the main interface, click the Radio icon to enter radio Mode. 2.If no headphone, the player will prompt the user to insert a headphone. Button/Icon Description Radio channel list,click to show radio channel list. Manual search: click to enter manual search mode ; short press or button to manually search up /down for radio channels, and the player is mute where no channel being found. Auto search: click to enter auto search mode. All channels can be automatically searched and saved.
Enter FM station recording interface Select frequency range: China, Japan, Europe and US. FM Recording Interface 1. In Radio mode, click enter FM station recording interface. to Button /Icon Description Stop, click it and it will change to play icon to enter recording mode Save the recorded file. View recorded file. Record settings 1.Recording format: WAV &MP3 formats. 2.Quality: high, medium, low. 3.Recoding gain volume: level 1, 2, 3. E-book Mode 1.
Button /Icon Description Manual browse: click it and it will change to to enter auto browser mode. Auto browser time setting: 10 seconds, 15 seconds , 20 seconds, 25 seconds, 30 seconds. Save and pick tag, click to show the tag list, and then click to save or select tag. Click or the part outside Save tag box to exit from the tag setting box. Skip to: click to show Skip to dialogue box, and click or to select the skip percentage. Click outside part of the Skip to box to exit.
and PC camera. Camera Setting Interface 1.Click camera to enter the mode. 2.In frame interface, touch the screen and top & bottom button bar will appear. Touch again, and the up/down button bar will disappear. Button Description Switch to video camera mode. Number of pictures that can be taken. Self Shootting time setting:5 seconds, 15 seconds, 20 seconds, off. Default setting is off. Return to the main menu. View the pictures. Picture mode settings 1.Special effect: White balance: auto, indoor, outdoor.
3.Date stamp: off, date stamp or date and time stamp. Default setting is off. To make no settings, touch the screen outside the menu to exit. Resolution switch: 320x240, 640x480, 1024x768, 1280x960. 2048*1536 Take picture Take white balance setting as an example: Click or to select among different mode, then click screen to confirm selection and exit. Video Camera Setting Interface 1. Touch the screen and top/bottom button bar will appear. Touch again and the button bar will disappear.
2.Save path: local device, card device. The default is local device. To make no settings, touch the screen outside the menu to exit. Resolution switch: 176x144, 224x176, 320x240. Start video recording Video Camera Interface Click to enter video recording interface, touch the screen and a button bar will be displayed at the bottom. Button Description Video recording: click to pause video recording. Save video file, and return to video setting interface.
In the main interface, click the Explorer icon to enter the mode : Flash Memory and Card Memory (not displayed if no card inserted). All files and file folders in the player can be listed, and the user may play the compatible music, video, e-book and picture files under this interface; or, the user may directly delete the selected files. Application In the main interface, click the Application to enter the mode. Recorder Click recorder to enter internal MIC recorder interface.
Stopwatch Click Start counting Next or Clear at the bottom to realize different functions. As counting begins, Start counting will change to Pause . Calculator Simply press the corresponding button. Notebook Only valid in Simplified Chinese and English writing. Input characters in the input box.
Input Method Switch input methods, from left to right: English, numbers & symbols, Chinese, all input methods(can be used to recognize three types of characters). 1. Click Chinese button to use Chinese input mode, as shown above. After input, choose the appropriate Chinese character on the keyboard. From left to right: delete the character before cursor, space and enter. 2.
Player Information Relevant read-only product information Set Time 1.Time format: on or off. 2.Time and date: click and to set. Language languages available for selection: English, Simplified Chinese, Traditional Chinese, Japanese, Korean, France, German, Spanish , Portugal, Dutch, Italian. Simply click to select the appropriate language. Display 1. Backlight time Click and to set. There are 9 options: 0 second, 5 seconds, 10 seconds, 15 seconds , 30 seconds, 1 minute, 5 minutes, 15 minutes and 30 minutes.
minutes and 120 minutes. The setting will change to the default value Off if re-start the player. Default Settings After the player enters this mode, the player will prompt an auto warning about whether to restore system default setting or not. Click Ok to restore factory default settings. Click Cancel to abandon this restoration. Upgrade After clicking this icon, the player will enter hardware upgrading warning interface.
is used as a PC Camera. Operating Platform For Windows2000, Windows XP, Vista, DirectX, Version 9.0 or above should be used. It is not recommended to use this tool under Windows98 or Windows Me. What format can video files be recorded into This tool can be used to record video files of 320*240, 30-frame AVI format. What format can picture files be taken into This tool can be used to take picture files of 320*240, JPG format file.
Run software, click the add file button on the right side of the input file column to add AV files to be converted, and a dialogue box will automatically pop out for adding one or more AV files. After the file is added, the path of the AV file will be displayed in the input file field as shown below; and, relevant information of the added file,such as the check box, file name and path,status and file length, will be displayed in the status column. 3.
folder dialogue box pops out, select the specified storage path, and then click confirm button. Afterwards, the path in which the video files are stored will be displayed in the output file column of the conversion tool interface. 3) Properties setting Before converting AV files, some important parameters of the video files need to be set, such as the type (AVI or WMV), the intercepted part and the length of the video file, image exchange, image quality.
In addition to the above file conversion methods, the AV files stored in the hard disk may also be selected and converted by right clicking the mouse and selecting the start video conversion in the pop-out menu, and the tool will automatically run and directly start file conversion. Recording Video and Taking Pictures 1.
Stop:under recording or pause recording mode, click the icon to stop recording and save the video file to the specified directory, and at the same time the start icon is active; return to the viewfinder interface, the thumbnail icon of the video file will be displayed at the bottom of the viewfinder interface.