MODEL NPB-252 PORTABLE CD MP3 RADIO PLAYER PLEASE READ THIS USER MANUAL COMPLETELY BEFORE OPERATING THIS UNIT AND RETAIN THIS BOOKLET FOR FUTURE REFERENCE.
WARNING TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. The Caution Marking is located at the bottom enclosure of the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions.
11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. 22. provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. Unplug this apparatus during lightening storms or when unused for a long periods of time.
CAUTION Follow the advice below for safe operations. ON PROTECTION AGAINST LASER ENERGY EXPOSURE • As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the casing. • Stop operation immediately if any liquid or solid object should fall into the cabinet. • Do not touch the lens or poke at it. If you do, you may damage the lens and the player may not operate properly. • Do not put anything in the safety slot.
LOCATION OF CONTROLS 1. AUX IN Jack 2. Volume Control 3. Repeat (REP) Button 4. Stop Button 5. PROG/+10 Button 6. Program Indicator 7. Repeat Indicator 8. CD Door 9. LCD Display 10. Play Indicator 11. FM ANT 12. REW/Search Backward Button 13. Play/Pause Button 14. F.F/Search Forward Button 15. Tuning Control 16. Function Switch (CD/AM/FM/Off) 17. Speakers 18. AC Power Jack 19.
Avoid installing the unit in locations described below: • Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters. • Dusty places. • Places subject to constant vibration. • Humid or moist places. POWER SOURCES This unit operates on 120V~ 60Hz or 6 x DC1.5V “C” (UM-2) batteries. Do not attempt to operate the radio on any other power source. You could cause damage to the unit and void your warranty.
CD PLAYER OPERATION CD OPERATION 1. 2. Set the Function Switch(CD/OFF/Radio)(#16) to the "CD" position. Open the CD Door (#8). Place an audio CD with its label side upward in the CD compartment and close the CD Door. 3. After a few seconds, the total number of tracks on the CD will appear in the CD LCD Display (#9). 4. Press the PLAY/PAUSE Button (13#) and the CD will start playing from the first track. 5. Adjust the Volume Control (#2) to obtain the desired sound level from the Speakers (#17). 6.
AUX IN OPERATION This CD features an aux line-in jack for connecting your iPod, MP3 player or other digital music player. 1. Connect the headphone jack of your external device to the AUX IN jack located on the left side of this CD player (The connection cable is not included). 2. Turn on the CD player and it will enter the AUX function mode once an external device is plugged into the AUX IN jack. 3. Start to play your iPod, MP3 player or other external audio device. 4.
Symptom Noise or sound distorted on AM or FM broadcast AM or FM no sound Possible Cause - Station not tuned properly for AM or FM. - FM: FM telescopic antenna is not extended. - AM: The bar antenna is not positioned correctly - Unit not in “RADIO” function mode. CD skips while playing - Volume set at minimum - Unit not in CD function mode. - CD is not loaded properly. - If the CD is self-compiled, the media used may not be compatible with the player. - Disc is dirty or scratched.
