NBB Controls + Components GmbH Nano-media Operating instructions
Content 2
Content General information .................................................................................................................................... 4 Transmitter Nano-media .......................................................................................................................... 8 Accessories ................................................................................................................................................... 12 Technical documents ..................
General information Standard scope of delivery – Transmitter including carrying system – Receiver with integrated mounting holes – Integrated connection cable or adapter cable for receiver The order confirmation and/or delivery note is binding for the actual scope of delivery. Safety information Even if you have already operated radio control systems, always read these operating instructions before commissioning.
Maintenance The NBB radio control system is maintenance-free. Nevertheless observe the following points: – Check EMERGENCY STOP and STOP function regularly. – Remove residues of building material. – Disconnect receiver from power supply before welding work, to avoid the risk of damage to the receiver electronics. – Check regularly for worn parts. Warranty NBB grants a functional warranty of 12 months from the date of sale on all NBB radio control systems (transmitter, receiver, charger).
General information US-FCC and CANADA IC > FCC notes Part 15.105 Statement NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.
Republic of China > Announcement No.
Transmitter Nano-media Technical data Nano-media combines the compact design of the Nano-minor with the technical variance of the Nano-magna – for the greatest variety of operating and feedback options in the smallest space. – Compact, ergonomic design – Also suitable for complex applications – Optional: 3-axis joysticks in NBB design – Optional: 4.3” LCD display with customer-specific design – Operation with 7.
Commissioning > Operating voltage 7.2 V Insert the battery in the battery compartment for commissioning. For removal, press in the locking pin to unlock and slide out the battery. Charge the rechargeable battery completely before initial use. 2. Slide out the 1. Press in the locking If the NBB radio control system won’t be used for a long period of time, it is strongly recommended remove the battery from transmitter and charge the battery approx. every 4 weeks.
Transmitter Nano-media Operation of the system > Switching the transmitter on and off –U nlock the emergency stop pushbutton by turning clockwise to switch on the transmitter. – Two acoustic signal sounds. – A red dot flashes in the LED display. – Switch off the transmitter by pressing the emergency stop pushbutton once. fter pressing the emergency stop pushbutton, the transmitter sends stop telegrams for A 2 seconds to switch off the system.
SMJ Technology – Surface Mounted Joystick > Surface Mounted Joystick – Switch off the transmitter and remove the battery. – Loosen all 4 screws of the Surface Mounted Joystick with a Torx 10 screwdriver and remove the screws. – Remove the Surface Mounted Joystick from the top. Insert the new Surface Mounted Joystick and make sure that the plugs and sockets are above each other when mounting. Screw down the Surface Mounted Joystick with the 4 screws previously removed and re-inset the batteries.
Accessories Technical data The nickel-metal hydride (Ni-MH) batteries from NBB have a high energy density and selfcleaning contacts. With an NBB charger, the battery packs are charged at a high charge current. This rapid charge is thermally controlled to optimise recharging and prevent overcharging. Technology Ni-MH Voltage 7.2 V Capacity 1,500 m Ah Maximum charging current 1.
Technical data Power supply 9 V – 32 V DC (e. g. by 12 V/24 V on-board electrical system) (Note: the charging procedure is lengthened below 10 V) Supply voltage via coaxial power connector (ø external = 5.5 mm, ø internal = 2.1 mm) or via cigarette lighter plug Measurements (L x W x H) 173,5 x 73 x 43,7 mm Configurable specific to battery (Delta Peak, dT/dt, charging current, timeout) Display of the charging procedure via a DUO-LED LED – continuously lights up green STANDBY.
Technical documents 14
Easy Movement Headquarter NBB Controls + Components GmbH Otto-Hahn-Straße 3 – 5 75248 Ölbronn-Dürrn GERMANY Fon: +49 7237 999-0 Fax: +49 7237 999-199 sales@nbb.de www.nbbcontrols.com NBB Controls, Inc. 5909 School Avenue Henrico, Virginia (VA) 23228 Fon: 800 706-4489 (only USA) Fon: +1 804 262-4846 Fax: +1 804 262-0596 sales@nbbcontrols.com www.nbbcontrols.com NBB Controls + Components China co., Ltd Huaiyun Building Room 1201, No.180 South of Yunnan Road, ZIP: 200021, Shanghai. P. R.
