User's Manual

NBS Payment Solutions 8/60 User Manual
1.1 UNPACKING AND INSTALLATION
Carefully preserve the packaging of the terminal. It must be re-used whenever the terminal is shipped.
Packaging contains:
• PORTABLE itself, equipped with its paper roll and charging base.
• Detachable power supply unit. (The power supply unit delivered with your terminal is specially designed for
it. Do not use any other power supply.) The use of a power supply having apparently similar voltage/current
characteristics may, in spite of this, damage your terminal
• Telephone cable
• Installation Guide
1.1.1 SAFETY INSTRUCTIONS
A- To power down the terminal base:
Disconnect the terminal power supply block from the electric power supply network.
B- Li-Ion battery
The terminal is fitted with an internal Li-Ion battery which is not operator accessible. Only a qualified technician
may be authorized to open the unit and service this component.
C- Electrical power supply network
Provide an A.C receptacle that meets the following recommendations:
• Connector is installed near the equipment and is easily accessible
D- Telephone Emergency, hanging up
You have an urgent call to make but the terminal is on your telephone line.
• Remove the portable from its base.
1.1.2 CONNECTING THE BASE WIRES
Select an electrical socket that complies with the general safety instructions as outlined in “Safety
Instructions.”
To connect the base wires:
• The customer’s telephone, fax, or modem can be connected to the first telephone jack. The base labels the
first jack with a graphic depicting a phone along with the text “In”.
• Connect the telephone line to the second telephone jack. The base labels the second jack with a graphic
depicting a phone along with the text “Out”.
• Connect the supplied DC power supply to a 120 V AC receptacle. Connect the output of the adapter by
inserting the plug into the base. A gap of 3 mm between the plug and the base is normal. Do not attempt to
force the plug to eliminate the gap.