User Manual
7. Pre-set Function
1) Set the clock rst. (Consult the instructions of clock setting.)
2) Input the cooking program. Maximum two stages can be set. Defrosting should not be
set in preset function.
Example: if you want to cook with 80% microwave power for 7 minutes.
a. Press "Microwave" once;
b. Press " " or " " to choose 80% microwave power till "P80" display;
c. Press "START/+30SEC/CONFIRM" to conrm;
d. Press " " or " " to adjust the cooking time of 7 minutes;
After the above steps, please do not press "START/+30SEC/CONFIRM". Then do as
following:
3) Press "CLOCK/PRE-SET". The hour gures will ash;
4) Press " " or " " to adjust the hour gures, the input time should be within 0--23.
5) Press "CLOCK/PRE-SET", the minute gures will ash.
6) Press " " or " " to adjust the minute gures, the input time should be within 0--59.
7) Press "START/+30SEC./CONFIRM" to nish setting. ":" will light up, buzzer will ring
twice when the time arrives, then cooking will start automatically.
Note: clock must be set rst. Otherwise the pre-set function will not work.
8. Auto Menu
1) In waiting state, press " " to choose the menu from "A-1" to "A-8".
2) Press "START/+30SEC/CONFIRM " to conrm the menu you choose.
3) Press " " or " " to choose the food weight.
4) Press "START/+30SEC./CONFIRM " to start cooking.
14