App & Sensor Instructions Product Name: TRAINING BAG SENSOR Model: APSENSOR01
Battery Door Sensor Green O-Ring Tube Tube End Fitting
QUICK START GUIDE STEP 1 Install Sensor in Aqua Training Bag.
QUICK START GUIDE STEP 3 Download Aqua Bag App and register.
QUICK START GUIDE STEP 4 Link App to Sensor and workout! FPO VIDEO THREE
TROUBLESHOOTING 1. Allow the App to access your location when prompted. Not doing so will cause the App to not function correctly. 2. If having trouble pairing the sensor to the App, verify Bluetooth is enabled on your device. If still having problems, log out of the App, close it and retry. 3. Do not overfill the bag with water. Doing so will cause the punch force to be wrong. When the bag is hanging, water should be filled to the bottom of the fill port.
STEP 1 Remove the standard plug from a properly-hung and filled Aqua Training Bag. STEP 2 Carefully insert the sensor’s tube into the bag.. Your new sensor will arrive sealed with shrink wrap. The recommendation is to leave the shrink wrap on the sensor to protect it from water intrusion when inserting the sensor for the first time.
STEP 3 Make sure the green O-ring is seated against the threads. Thread the sensor into the bag’s plug opening, stopping when it’s firmly hand-tightened. The sensor needs to be tight enough that no air is leaking around the threads, but caution should be used, as over-tightening the sensor could damage it.
STEP 4 Remove the sensor’s battery door by removing the screw and depressing the push button. Insert two AAA batteries. Then replace the battery door and screw.
STEP 5 Download the Aqua Training Bag App in the App Store or Google Play.
STEP 6 Open the Aqua Training Bag App and tap “Sign Up” to start the registration process. Your tablet or phone will need Wi-Fi or cellular data access to the web for the registration process. Allow the App to access your location when prompted. Not doing so will cause the App to not function.
STEP 7 Complete the sign-up form. Tap Next. A 6-digit verification code will be sent via email. Enter this code and tap verify.
STEP 8 Complete the Profile Questions. STEP 9 Congratulations! You have completed the registration process. The App’s main dashboard will now appear.
STEP 10 Tap “Profile” at the bottom right corner of the screen. STEP 11 Tap “Device Manager.
STEP 12 Tap the blue connect button next to the sensor name. If multiple sensors are being displayed, make sure you select the correct serial number. Select the correct size bag you are using (15”, 18”, or 21”) and tap OK.
STEP 13 Once the App is properly connected to the sensor, an orange disconnect button will appear. Once this disconnect button appears, you have properly paired the App and Sensor. STEP 14 Tap the back button at the top left corner of the screen.
STEP 15 Tap the Exercise button at the bottom left corner of the screen. STEP 16 Tap the green start button to start exercising.
STEP 17 Select the length of each round (1, 2, 3, or 5 minutes) and the number of rounds (1-12) and click save. STEP 18 A 30 second countdown timer will start, counting down before the round starts. You can skip the countdown by tapping Start Immediately.
STEP 19 During each individual round the App will instantly refresh showing the power of the last strike, number of power punches, and frequency of punching across the three large circles in the center of the screen.
STEP 20 The center circle will illuminate in red when you hit a power punch. STEP 21 At the bottom of the screen will be a graphical summary of the number of punches and power punches thrown each round.
STEP 22 During each workout the App will record the training time, calories burned, average punch power, maximum punch power, and total strikes thrown. This data will be displayed horizontally across the top of the screen.
STEP 23 You can also workout in Free Mode, by selecting that at the top of the screen. Free Mode allows you to have unlimited length rounds. STEP 24 You can start a new round at any time when in Free Mode by tapping the New Round button. STEP 25 A one-minute break between rounds will begin when you tap the “New Round” button. The screen will allow you to skip the break or add more time. STEP 26 You can stop a round at any time by tapping the red Stop button.
FCC Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
-- Consult the dealer or an experienced radio/TV technician for help This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions (1)this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For more information visit us at: WWW. AQUATRAININGBAG .