Operator's Manual

Operation
8
3.1.2 Wireless Scale Operation
1. To ensure accuracy, place the scale on a hard, flat surface. Make sure there are no
objects beneath the scale before weighing.
2. Make sure other smart devices in the area that also have the AccuroFit app installed
have Bluetooth turned off (the smart device closest to the scale will receive the new
weight measurement).
3. Open the AccuroFit app and navigate to the “Weight” screen by clicking “My Body”.
4. Make sure Bluetooth on your smart device is turned on. Click “Connect To Scale”.
5. Wait for “Please step on the scale” message to appear in the top center of the app
screen before stepping on the scale.
Figure 3-5. Step on Scale Message
6. Gently step on the scale, the scale will automatically turn on.
A “Read Timeout” Message will appear in the top center of the screen if you
take more than 30 seconds to step on the scale. If this message appears, re-
connect the scale.
7. Stand evenly on the scale without moving and wait until your weight on the display
is stable and locked. The display will flash three times when it is locked.Your current
weight will simultaneously be saved to your AccuroFit account and will appear on
the app screen.
8. A “Please step off the scale” and “Successful” message should appear in the top
center of the app screen.
9. When you step off the scale, it will automatically shut off in approximately 12
seconds.
You must connect to the scale before every weigh-in.
Overload Indication
Scale overload (maximum weight capacity is indicated on the back of
the scale). Step off to avoid damage.
Re-Weigh Indication
Weight reading error. Wait for the scale to turn off and repeat the
weighing process.
Note
Note