Operator's Manual

Assembly
3
2.0 Assembly
Place the shipping container in an open area with room for unpacking. Ensure the
shipping container is free of any outside damage. If there is damage, do not open the
shipping container, take pictures of the damage and notify Rice Lake Weighing Systems
and the shipper immediately.
Retain the original shipping materials and container should the
product need to be returned. The product must be properly
packed with sufficient packing materials prior to being moved or
shipped.
Damage caused by improper packaging is not covered by the
warranty.
2.1 Scale Setup
Use the following sections to set up the scale.
2.1.1 Battery Installation
Requires 2 AAA batteries (included).
1. Open the battery compartment cover on the back of the scale.
2. Remove the red tab before use.
Figure 2-1. Battery Compartment
3. Install batteries with negative end of batteries against the spring in +/- orientation.
Wait for scale to display 0.0 before stepping on scale.
IMPORTANT
Note