\ * Si tin center. + If seat sensor Is occupied, ‘beep’ sounds. # [f the seat is occupied, Rim nozzle on the ceramic discharges water for 2 seconds to wet the surface of toilet bowl (Pr-mist feature) \. J f) Press the “REAR WASH” or “FRONT WASH” button + Operate either the "REAR WASH" or the" FRONT WASH" function. Each function operates for go seconds. « It beeps if cleansing or bidet cleansing function is over. \ J £) Press the “DRY” button I » Dryer function will operate for 3 minutes.
Oscillating Wash . Pres st/ to activate the OSCILLATING WASH. The nozzle moves back and forth while In REAR WASH position. ‘This function can also be activated in FRONT WASH position by pressing vd FRONT WASH, then, OSCILLATING WASH. OSCILLATING WASH will automatically stop after 3 minutes, or by pressing the [Hl] button. \Nozzle Position Adjustment a « Press g/ to move the NOZZLE FORWARD, or to move the NOZZLE REARWARD during wash. > .
(] Water Temperature Adjustment a Water temperature can be adjusted by pressing the button. % There are 3 temperature settings to choose from: -Low: 93.2°F (34°C) Medium: 98.6°F (37°C) High: 104° F (40°C) (J Warm Seat Temperature Adjustment A © Seat temperature can be adjusted by pressing the button. % ‘There are 3 t temperature settings to choose from: Low: 95°F (35°C) Medium: 100.
Nightlight » LED Nightlight activates by pressing Q button and LED Nightlight function runs automatically when getting dark. To cancel the LED Nightlight function, press Q button again and LED goes OFF. ® When LED Nightlight function rums, Bidet senses automatically toilet light and LED Nightlight goes on. User can use conveniently bidet without toilet it. Electric power consumption is lite and use the LED Nightlight function without care about the electric charge.
