User's Manual

16
To connect to the PC make sure the network in your computer is configured properly.
Here’s how to configure the network properties to connect PC with the OfficeStation.
Connect to PC with a Hub
You can set up the network environment in your PC,
Go to Start ->
right Click on My Network Places ->
Double Click on the Network Connection associated with
the Ethernet adapter.
Click Internet Protocol (TCP/IP)
Click Properties ->
Select “Use an IP following IP address”
Type in the IP address, subnet mask and Default gateway
of the your PC
And Click OK
e.g) IP Address: 192.168.1.1
Subnet mask: 255.255.255.0
Default gateway: 192.168.10.0
Power on the OfficeStation->
Click Setup menu bar->
Connecting to a PC through a Hub or a Router