User's Manual

Configuration Files C-17
Call NCR field personnel for assistance."
[ESFDA]
WARNING, "EPL Failure Detection and Anaysis detected warnings that may lead to
EPL system problems later. Investigation of these problems is recommended. Call
NCR field personnel for assistance."
ERROR, "EPL Failure Detection and Analysis detected errors that are causing
serious EPL system problems. Immediate investigation of these problems is
recommended. Call NCR field personnel for assistance."
[ESAMS]
ERROR, "EPL Automated Messaging System logged errors that could cause serious EPL
system problems. Immediate investigation of these problems is recommended."
1000, "Invalid parameter data error message indicates that an invalid command
line option was specified. Review usage information and restart.
1103, "The system is running low on memory. Check using 'sar -r' for memory
activity."
1152, "Unable to obtain semaphore. Check the kernel parameters or tune the
semaphore count."
1200, "The EPL Table has been closed. Reopen it using 'tbltest'."
1209, "The EPL table has become corrupt. Call customer support."
1300, "The communication to the CBS is closed. Reopen the communication using
the EPL administration utility."
1303, "Unable to communicate with the CBS. Run diagnostic tests on the CBS's."
1304, "The master CBS link is down. Verify that the CBS's are functioning
properly."
1310, "Unable to communicate with the EPL. Check to see if the EPL exists and is
in within RF range."
1372, "The Master CBS unexpectedly closed EPL communications. A fault has been
deted in the communication link between the CBS Manager and the Master CBS. If
the problem persists, call customer support."
1600, "The Data Scheduler is closed. Open the data scheduler."
1607, "The Data Scheduler files are corrupt. If problem persists, call customer
support."
1624, "The Data Scheduler was unable to create the spool file. Check the
permissions of the file 'spool.dat' and verify the disk space."
1631, "Unable to communicate with the EPL before due time. Check to see if the
EPL exists and is in RF range."
1682, "Unable to communicate with the EPL before due time. Check to see if the
EPL exists and is in RF range."
1683, "The Data Scheduler was unable to update the spool file. Check the
permissions of the file 'spool.dat' and verify the disk space."
1684, "The Data Scheduler was unable to add records to the spool file. Check the
permissions of the file 'spool.dat' and verify the disk space."
1686, "The CBS did not process the send request. Possibly, the message sent to
the CBS manager from the scheduler has invalid data. Check the Data Scheduler
log"
1690, "The Data Scheduler is closed. Open the data scheduler."
1808, "The PLU file cannot be opened. Call customer support."
2102, "Unable to communicate with the PLU Reader. Check to see if the PLU reader