User's Manual

Chapter 2: Installing the Hardware Infrastructure 2-13
Hopping frequencies are assigned during the manufacturing process,
but can be modified using the RealPrice Support Utility. Refer to
“Chapter 2: The RealPrice Support Utility” in the RealPrice Utilities
Guide (B005-0000-1487) for details on how to use this utility to view and
set the CBS Hopping Table after the RealPrice Base Software for
Windows NT/2000/XP is installed. Refer to the "dncbssetup (CBS
Setup Utility)" section of “Chapter 7: Testing and Troubleshooting in
AIX” in the RealPrice Installation and Service Guide (B005-0000-1247) for
details on how to view and set the CBS Hopping Table after the
RealPrice Base Software for AIX is installed.
CBS Cables
The following cables are supplied by NCR.
Cable ID
(Part Number)
Description Length
m (ft.)
Connect From Connect To Comments
1416-C465-0018
(230-0146539)
Transmit
antenna cable
(plenum
rated)
1.8 (5.9) CBS transmit
antenna
connector
Transmit
antenna
Has TNC screw-
on connectors
1424-C057-0180
(230-0134951)
Receive
antenna cable
(plenum
rated)
18 (59) CBS receive
antenna
connector
A, B, C, or D
Receive antenna Has BNC
connectors
Cable included
with receive
antenna kit.
1416-C520-0150
(230-0134953)
Receive
antenna cable
(plenum
rated)
15 (49) CBS receive
antenna
connector
A, B, C, or D
Receive antenna Has BNC
connectors
Cable included
with receive
antenna kit
Use this cable
with 100 mW
CBSs