User's Manual

2-16 Chapter 2: Installing the Hardware Infrastructure
Power Cable Connectors
Each CBS is shipped with a 10-wire connector
that plugs into the 10-wire power receptacle.
The only tool required to install the power
cable into the connector is a small screwdriver.
21390
Data Cable Connectors
An RJ45 connector is required for each of the CBSs data connectors.
The RJ45 connectors must be purchased from a third party. A crimp
tool is required to install the data cable into the RJ45 connector.
The following table provides information about RJ45 connectors and
crimp tools.
Manufacturer Manufacturer
Part Number
Quantity Description
AMP 5-557315-1
5-557315-2
5-557315-3
5-557315-4
10,000 (loose)
500 (loose)
1,000 (10 boxes of
100)
1,000 (40 bags of 25)
RJ45, 8-position,
unshielded type
1
AMP 1-231666-1 1 Crimp tool
2
Ideal 33-652 1 Crimp tool
2
Ideal 30-560 1 AMP die for Ideal
crimp tool
3
1
Use any comparable RJ45 connector compatible with your crimp
tool.
2
Use any crimp tool compatible with your RJ45 connector.
3
Necessary only when using AMP connectors and Ideal crimp tool.