User's Manual

Chapter 2: Installing the Hardware Infrastructure 2-21
The CBS can be mounted in any position. The mounting bracket and
universal beam clamps permit a wide variety of installations. Position
the CBS for easy LED and connector access. The following illustrations
show a CBS mounted to a roof truss.
Step 1.
21392
Step 2.
Mounting Bracket Tabs
A
B
C
D
T
r
a
n
s
m
i
t
R
e
c
e
i
v
e
A
B
C
D
T
r
a
n
s
m
i
t
R
e
c
e
i
v
e
A
B
C
D
Tr
a
n
s
m
i
t
R
e
c
e
i
v
e
A
B
C
D
Tr
a
n
s
m
i
t
R
e
c
e
i
v
e
Warning: The CBS must be mounted securely and installed in
accordance with local building codes. The mounting surface must be
able to withstand a minimum weight of 2.26 kg (5 lb.).
Caution: DO NOT install a CBS by placing it on a ceiling tile.
The following procedure describes the installation of a CBS to a roof
truss as shown in the previous illustration.
1. Attach the CBS mounting bracket to the universal beam clamp
using the Phillips head screws and the tabs on the side of the CBS
mounting bracket.
Caution: Vibrations can loosen the screws holding the mounting
bracket to the clamps. It is extremely important to place the lock
washers on the screws before installing the screws into the clamps.
2. Attach the clamp to the beam.