User's Manual

Chapter 2: Installing the Hardware Infrastructure 2-39
Note: If your network is using a Dynamic IP Addressing, use the ARP
utility to display a list of the dynamically assigned IP Addresses. Refer
to “Chapter 4: Common Diagnostic Utilities” in the RealPrice Utilities
Guide (B005-0000-1487) for details on ARP. Cross reference the CBS
MAC address to the CBS number assigned in the store layout to
confirm all CBSs respond to the ping test. If reserved IP addresses were
used, refer to that list to confirm all CBSs respond to the ping test.
Document CBS Network Addressing
Note the CBS Numbers, MAC Addresses, and CBS IP Addresses on the
store layout for reference purposes.
RealPrice Software Installation, Configuration, and Testing
After the CBS hardware network is verified and you have documented
the CBS network addressing information, the next steps are to install
RealPrice Software, modify the RealPrice CBS Configuration file, and
validate RealPrice System functionality. The following sections identify
where to find details to accomplish these steps.
• Installing RealPrice Software
Refer to “Chapter 2: Installing RealPrice for Windows Software” or
“Chapter 3: Installing RealPrice for AIX Software” in the RealPrice
Software Guide for details.
• Modifying the CBS Configuration File
Refer to “Chapter 4: CBS Configuration” in the RealPrice Software Guide
(B005-0000-1479).
• Verifying Hardware and Software Configuration
For RealPrice for Windows NT/2000/XP systems, refer to “Chapter 2:
The RealPrice Support Utility” in the RealPrice Utilities Guide (B005-
0000-1487).
• View the CBS network addresses.