User's Manual

Chapter 3: Maintenance 3-3
RealPrice Support Utility
Note: Refer to the Chapter 2: The RealPrice Support Utility in the
RealPrice Utilities Guide (B005-0000-1487) for details on using this
utility.
• In a Windows NT/2000/XP environment, start the RealPrice
Support Utility by entering the following command at a DOS
system prompt.
dnutils
• Select the following options to Enable Normal Mode
communications:
11. CBS Setup > 51. Set Communications Mode > 1. Normal Mode
• Select the following options to View/Set Timeslots
11. CBS Setup > 13. Timeslot IDs
• Select the following options to View/Set Frequency Hopping Table
entries
11. CBS Setup > 16. Hopping Tables
• Select the following options to View Diagnostics
11. CBS Setup > 44. View Diagnostics
RealPrice for AIX CBS Setup Utility
Note: Refer to the “dncbssetup (CBS Setup Utility)” section in
“Chapter 7: Diagnostics and Troubleshooting” of the RealPrice
Installation and Service Guide (B005-0000-1247) for details on using this
utility.
• In a Windows AIX environment, start the CBS Setup utility by
entering the following command at an AIX system prompt.