User's Manual

3-10 Chapter 3: Maintenance

2. Attach the Battery Replacement tool to the ESL as shown in the

following illustration.

19247

3. With thumb and index finger, compress the spring to open the

clamp. Set the terminals into the first and third holes.

4. Hold pressure down on the terminals into the holes and release the

clamp until it firmly holds the ESL.

5. Remove the battery cover.

Caution: In the following steps, do not permit the battery to contact

the terminals of the Battery Replacement tool.

6. Remove the battery.

7. Place a new battery in the battery cavity.

8. Replace the battery cover.

9. Remove the Battery Replacement tool.