User's Manual

Chapter 3: Maintenance 3-19
The ImageFilename indicates that the firmware image is 3.3.4 and
ImageVersion reflects the same version.
TargetVersion is the firmware version that is targeted to be
upgraded. Wild card characters can be used.
3. Place the boot file and firmware image in the dnet\firmware
directory.
4. From a command prompt, type dnloadcbsfirmware. The
following screen displays if successful.
Note: dnloadcbsfirmware takes care of the stopping and starting
RealPrice as well as flashing firmware. The process will take a few
minutes. Please be patient while the entire process is carried out.