User Manual Chapter 3

Chapter 3: Installing the Hardware Infrastructure 3-17
18829
A
B
CD
Transmit
Receive
Warning: The CBS must be mounted securely and installed in
accordance with local building codes. The mounting surface must be
able to withstand a minimum weight of 2.26 kg (5 lbs.).
Caution: DO NOT install a CBS by placing it on a ceiling tile.
The following steps describe a typical installation in which a CBS is
mounted to a roof truss as shown in the previous illustration.
1. Use the screws and lock washers to secure the clamps to the
mounting bracket.
Caution: Vibrations could loosen the screws holding the mounting
bracket to the clamps. It is extremely important to place the lock
washers on the screws before installing the screws into the clamps.
2. Position the clamps on the roof truss and tighten the clamp screws.
3. Install the CBS into the mounting bracket.
Caution: To prevent damage to the transmitter, the transmit antenna
must be connected to the CBS before power is applied to the CBS.