User Manual Chapter 3

3-18 Chapter 3: Installing the Hardware Infrastructure
Preferred CBS Mounting Solution
1.
A
B
C
D
Transmit
Receive
A
B
C
D
Transmit
Receive
19014
2.
1. Attach the CBS Mounting Bracket to the universal beam clamp
using the phillips head screws and the tabs on the side of the CBS
Mounting Bracket.
2. Attach the clamp to the beam.
3. Insert the CBS as shown in figures 1 and 2.
Connecting Ethernet Data Cables
From the primary CBS, a data cable connects every secondary CBS in
the system as shown previously in “CBS Ethernet Cable Connections”
section. Note that the Uplink data connector is used to connect to a
higher level CBS and the data connectors 1, 2, and 3 are used to connect
to lower level CBSs.
Connecting the Ethernet Hub to the Primary CBS
Each store configuration has only one primary CBS. All other CBSs are
secondary CBSs. The primary CBS is the one connected directly to the