User Manual Chapter 4

Chapter 4: Installing DecisioNet Software on a Windows NT or Windows 2000 System 4-5
• On the Serial Device Port Assignment screen, you may select
the default scanner port (COM1) or identify a different serial
device port where the scanner is to be connected when
downloading scan files. Click Next to continue or Cancel to
quit.
• If all your information is correct, click Install on the Ready to
Install screen or Cancel to quit.
The software installs to the destination directory.
• After all files are installed, the Finished screen displays, Click
Finish or press Enter.
Installing the Application Development Environment Package
Note: This is a controlled software package intended for NCR and
NCR Partner software developers who are integrating DecisioNet into
an existing price management system.
Install the Application Development Environment Package software
using the following set of instructions.
1. Click the Start icon at the bottom left of the screen.
2. Select Run.
3. Insert Application Development Environment Package for
Windows NT/2000 Package CD in your CD-ROM drive.
4. Use the Browse button to locate the ADESETUP.EXE file on the CD.
Select this file and select Open.
The path and file name display in the Run dialog.
7. Select the OK button or press Enter to start the installation.
The installation displays a series of screens in the following
sequence.
• A Welcome screen appears. Click Next to continue the
installation or Cancel to quit.